• Journal of Soil and Groundwater Environment
• /
• v.28 no.4
• /
• pp.1-5
• /
• 2023

In the fabrication of magnetic adsorbent by incorporating iron species on base materials with layered structure, there can be a potential loss of adsorption capacity from the penetration of dissolved iron species into the structure. This work newly synthesized a magnetic adsorbent by incorporating nano magnetite and glucose into layered metal sulfide via hydrothermal treatment, and tested the removal efficiencies of cesium ions (Cs⁺) by the adsorbents fabricated under different conditions (final temperature and glucose mass ratio). As a result, the optimal fabrication condition was found to be mass ratio of 1 (layered metal sulfide): 0.1 (nano magnetite): 0.4 (glucose) and final temperature of 160℃. As-prepared adsorbent possessed good adsorption ability of Cs⁺ (54.8 mg/g) without a significant loss of adsorption capacity from attaching glucose and nano magnetite onto the surface.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.2
• /
• pp.15-22
• /
• 2011

In this study, the effect of surface coating on iron-sulfide mineral for preventing the product acid mine drainage(AMD) was progressed by oxidation process of sulfide minerals abandoned mine Area. Three abandoned mines, Yongdong coal mine, Sil Lim mine, and Il Koang mine were selected as a sulfide mineral resource due to higher contamination rate. Six coating agents, apatite, limestone, mangnite, dolomite, bentonite, and cement were used for preventing the AMD with $H_2O_2$ and NaClO as a oxidizing agent helping for oxidizing process on sulfide minerals. Experimental results showed that sulfide mineral surface was coated effectively. Cement has a higher ability of preventing AMD when the ratio of cement to mineralis 1:1 and experimental condition is maintaining 4Days.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.383-395
• /
• 2008

To enhance the grade and recovery rate of the gold/silver ores which yield at Philippine Mankayan mine, we studied the characteristics which are the geologic and mineralogical features of gold and silver ore, the liberation by crushing and grinding, the separation by sieving and shaking table. Gold/silver ore is composed of the sulfide minerals like pyrite, sphalerite, galena; and the gangue minerals which is quartz, clay. Gold/silver element are mainly contained in a sulfide minerals like pyrite, sphalerite and galena. To increase the liberation rate of sulfide minerals containing gold/silver element, the gold/silver ore has to be grounded under $100{\mu}m$ very finely because the crystal size of sulfide minerals is distributed from $1{\mu}m$ to $100{\mu}m$. The liberation rate of gold/silver ore increases to 92% when the particle size ($d_{90}$) of ore is grounded below $100{\mu}m$ by jaw crusher $\to$ cone crusher $\to$ rod mill by steps. The grade and recovery of sulfide minerals could not be enhanced by sieving separation because those crystal size is distributed homogeneously below $100{\mu}m$. But, when we separated the sieved ore using shaking table, the gold and silver grade increased to 40 ppm and 140 ppm, respectively. Then the recovery rate of gold reach almost 100% but that of silver is no more that 50%.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.233-247
• /
• 2012

We have researched the distribution and characteristics of seafloor hydrothermal deposits for the development of economic mineral deposits in the Lau Basin, Tonga since 2009. In this study, we interpreted hydrothermal alteration around TA 26 seamounts of the Tofua volcanic arc using X-ray diffraction analysis for bulk sample and preferred-oriented specimen of clay fraction. We used 2 core samples and several surface samples. Plagioclase and quartz are dominant mineral in the basement rock, whereas kaolin mineral and smectite are superior in marine surface sediments. Especially sulfate and sulfide minerals such as gypsum, barite, sphalerite, and pyrite are predominant in the vent sediments. When we compare the mineral composition between basement rock and sea surface sediments, argillic alteration zone composed of kaolin mineral and smectite could be produced by hydrothermal fluids. Based on the downcore variation of mineral assemblages, most portion of MC08H-06 core could be interpreted as argillic alteration zone composed of kaolin mineral and smectite except top 2 cm area. Various sulfate or sulfide minerals and argillic alteration zone suggest a high probability of massive sulfide deposits in the seafloor of the TA 26 seamount.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.247-252
• /
• 2014

Gagok Mine, which is skarn deposits, includes sulfide minerals such as sphalerite, galena, chalcopyrite, and pyrrhotite. To explore these minerals, spectral induced polarization (SIP) is relatively effective compared to other geophysical exploration methods because there is a strong IP effect caused by electrode polarization. In the SIP, the chargeability related to sulfide mineral contents and the time constant related to the grain size of the minerals are obtained. For this reason, we aim to compare difference in the mineralized characteristics between two orebodies in the Gagok Mine by using the chargeability and the time constant. For this study, we sampled ores from the south of Wolgok orebody and the north of Sungok orebody. In order to recognize the mineralization characteristics, the metal content of the samples was measured by a potable XRF and the SIP data of the samples were acquired by using a laboratory SIP measurement system. As a result, the metals in the samples such as Pb, Zn, Cu, and Fe were detected by the portable XRF measurement. In particular, the Fe and Zn contents were far higher than the other metals. The Fe and the Zn were caused by the sphalerite and the pyrrhotite through microscopy. The Wolgok orebody had higher sulfide mineral contents than the Sungok orebody and the result corresponded with the chargeability result. However, we considered that the Sungok orebody had a larger sulfide mineral grain size than the Wolgok orebody because the time constant of the Sungok orebody was larger.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.09a
• /
• pp.264-267
• /
• 2006

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.211-217
• /
• 2010

A micro-focus X-ray computed tomography (CT) was employed to determine quantitative phase analysis of skarn Zn-Pb-Cu ore by nondestructive visualization of the internal mineral distribution of a skarn ore. The micro CT images of the ore were calibrated to remove beam hardening artifacts, and compared with its scanning electron microscope (SEM) images to set the threshold of CT number range covering sulfide ore minerals. The volume ratio of sulfide and gangue minerals was calculated 20.5% and 79.5%, respectively. The quantitative 3D X-ray CT could be applied to analyse the distribution of economic minerals and their recovery.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.3-10
• /
• 2006

The solvent extraction for the separation of platinum group metals from the leach liquor of spent automotive catalysts has been studied. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) and di-n-hexyl sulfide (DHS) were used as extractants and kerosene as a diluent. The extraction behavior of platinum, palladium and rhodium has been investigated as functions of different kinds of extractants and their concentrations. In addition, the extraction behavior of the major metal impurities such as cerium, lead, iron, magnesium and aluminum has been investigated. Platinum and palladium were extracted with TBP. And platinum, palladium and rhodium were extracted with TOA. Platinum was co-extracted with palladium into the organic phase by solvent extraction using SFI-6 of DHS extractant, but only palladium was selectively extracted with SFI-6R. The selective extraction of palladium with SFI-6R was found better than that with SFI-6, but the kinetics of extraction with SFI-6R was found poor in comparison to SFI-6. The metal impurities extracted simultaneously during the extraction of platinum group metals should be removed in scrubbing and stripping processes. A suitable process has been proposed for the separation of platinum group metals from the leach liquor of spent automotive catalysts. Initially palladium was extracted with SFI-6R, followed by the separation of platinum with TBP or TOA leaving rhodium in the raffinate.

• Ocean and Polar Research
• /
• v.28 no.2
• /
• pp.187-199
• /
• 2006

The Kuroko-type seafloor massive sulfide deposits found in the western Pacific have been considered to have potentials for economic recovery of Au, Ag, Cu, Zn, and Pb. In this study, a preliminary model was developed for the technical and economic evaluation of them. The FRSC site on Lau Basin in the Tonga EEZ was selected as a target. In this study, no construction In for the metallurgical processing subsystem was accounted for. Instead, it was assumed to sell the Cu, Zn, and Pb concentrates to the existing sulfide customer smelter. The low total investment costs for the development make the venture very attractive. However, the result of the economic feasibility evaluation is still less attractive with the mean metal yield of the Kuroko on land. It is considered that commercial mining may be plausible if the richer metal yields are applied to the development. Quantitative information for metal yield is necessary for a more accurate evaluation. However, the important resource potential information regarding the amount of ore body, the inside structure, and the metal yields have not yet been clarified sufficiently. h addition, the flotation of ore body using seawater has not been tested yet. It is necessary to solve these problems through the experimental R&D and a survey.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.56-65
• /
• 1997

Chemical analysis, statistical analysis and geochemical study were carried out to investigate the influence of the geology on the chemical characferistics of the mineral water in Taegu area. A simple comparision between the chemical components of the mineral water and their bedrocks indicates that the bedrock types in the catchmerit area control the chemical characteristics of the surface water. However more objective evidences for the mineral water-bedrock relationship come from the statistical analyses(cluster analysis and factor analysis). The results of the statistical analyses suggest that the bedrock type factor explains the data variation seven times as much as pollution does, which evidently indicates that the bedrock in the study area mainly control the mineral water chemistries. The results of comparision of the statistical analyses results with the mineral weathering reactions and mineral stability diagrams can be summarized as follows: 1. Plagioclase weathering to kaolinite provides SiO$_2$ , Ca$^{2+}$ and Na$^+$, and muscovite weathering to kaolinite provides K$^+$, and amphibole and mica minerals weathering to kaolinite provides F to the mineral water. Most of Ca$^{2+}$ and Mg$^{2+}$ in the mineral water are the products of carbonate mineral dissolution. SO$_4^{2-}$ may be the byproduct of sulfide oxidation. 2. The weatering of silicate mineral produces Ca-rich smectite and kaolinite, but Ca-rich smectite is unstable and will be transformed to more stable kaolinite because of the continuous dilution of the mineral water by precipitation. By Hashimoto's Mineral Balance Index, S-10 and S-12 mineral spring water were evaluated tasty and healthy water, S-9 and S-11 mineral spring water were evaluated tasty water and S-7, S-8 and S-13 mineral spring water were evaluated healthy water.