• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.327-328
• /
• 2005

Trace anions in high-sulfate wastewater from mainly derelict mines were determined by ion chromatography with on-line preconcentration and preelution technique. As the sample was preconcentrated and more strongly held ions were preeluted to the principal separation system, this approach was highly effective in removing large concentration of sulfate in high-sulfate wastewater. With this practical on-line preelution treatment, the peaks of fluoride and chloride showed good resolution even when the sulfate concentration was as high as 2000 mg/L and the analyzed total metal concentration was above 500 mg/L.

• Computers and Concrete
• /
• v.19 no.2
• /
• pp.143-152
• /
• 2017

This paper has numerically investigated the changes of loading-induced stress in concrete with the corrosion time in the sulfate-containing environment. Firstly, based on Fick's law and reaction kinetics, a diffusion-reaction equation of sulfate ion in concrete is proposed, and it is numerically solved to obtain the spatial and temporal distribution of sulfate ion concentration in concrete by the finite difference method. Secondly, by fitting the existed experimental data of concrete in sodium sulfate solutions, the chemical damage of concrete associated with sulfate ion concentration and corrosion time is quantitatively presented. Thirdly, depending on the plastic-damage mechanics, while considering the influence of sulfate attack on concrete properties, a simplified chemo-mechanical damage model, with stress-based plasticity and strain-driven damage, for concrete under axial loading and sulfate attack is determined by introducing the chemical damage degree. Finally, an axially compressed concrete prism immersed into the sodium sulfate solution is regarded as an object to investigate the time-varying stress in concrete subjected to the couplings of axial loading and sulfate attack.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.96-102
• /
• 2000

For the effective treatment of dyeing-complex wastewater, the most effective chemical coagulation method was studied. For the chemical coagulation of dyeing-complex wastewater, polyferric sulfate, $4Al_2(SO_4)_3$, PAC, ferrous sulfate, ferric sulfate, $FeCl_2$ and lime were used. It was investigated that polyferric sulfate was the most efficient coagulant. The optimal conditions and results for polyferric sulfate include the followings. When initial $COD_{Mn}$ concentration was 600mg/L, the optimal initial pH, dosage of coagulant, dosage of lime and PAA for $COD_{Mn}$ removal efficiency were 5, 1,200mg/L, 500mg/L and lmg/L, respectively. The optimal dosage of polyferric sulfate was increased proportionally to the influent $COD_{Mn}$ concentration.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.277-280
• /
• 2006

This paper presents the findings on the sulfate resistance of mortar specimens with or without alkali-free accelerator exposed to sodium sulfate solution for 270 days. Test results confirms a negative effect of alkali-free accelerator on the sulfate deterioration. Additionally, the influences of exposure concentration and temperature of sulfate solution on expansion were investigated. Especially, at a high concentration of solution a significant expansion of mortar specimens with alkali-free accelerator was observed. Further, low temperature also promoted the deterioration of the cement system due to sulfate attack.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.280-287
• /
• 2015

The high time-resolution monitoring data are essential to estimate rapid changes in chemical compositions, concentrations, formation mechanisms, and likely sources of atmospheric particulate matter (PM). In this study, $PM_{2.5}$ sulfate, $PM_{2.5}$, $PM_{10}$, and the number concentration of size-resolved PMs were monitored in Fukuoka, Japan by good time-resolved methods during the springtime. The highest monthly average $PM_{2.5}$ sulfate was found in May ($8.85{\mu}g\;m^{-3}$), followed by April ($8.36{\mu}g\;m^{-3}$), March ($8.13{\mu}g\;m^{-3}$), and June ($7.22{\mu}g\;m^{-3}$). The cases exceed the Japanese central government's safety standard for $PM_{2.5}$ ($35{\mu}g\;m^{-3}$) reached 10.11% during four months campaign. The fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ varied from 12.05% to 68.11% with average value of 35.49% throughout the entire period of monitoring. This high proportion of sulfate in $PM_{2.5}$ is an obvious characteristic of the ambient $PM_{2.5}$ in Fukuoka during the springtime. However, the average fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ in three rain events occurred during our intensive campaign fell right down to 15.53%. Unusually high $PM_{2.5}$ sulfate (> $30{\mu}g\;m^{-3}$) marked on three days were probably affected by the air parcels coming from the Chinese continent, the natural sulfur in the remote marine atmosphere, and a large number of ships sailing on the nearby sea. The theoretical number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ was originally calculated and then compared to $PM_{2.5}$ sulfate. A close resemblance between the diurnal variations of the theoretically calculated number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ and $PM_{2.5}$ sulfate concentration indicates that the secondary formed $(NH_4)_2SO_4$ was the primary form of sulfate in $PM_{2.5}$ during our monitoring period.

• Korean Journal of Microbiology
• /
• v.26 no.2
• /
• pp.129-136
• /
• 1988

To investigate the influence of cosubstrate supplement and ammonium sulfate on lignin degradation by Pseudomonas diminuta KM-4-2, isolated in the laboratory, the strain was cultured on the lignin media which contained lignin as a source of carbon and the culture filtrate was analyzed by Sephadex G-75 column chromatography. It was found that polymerization was not appeared unlike wood-rot fungi. When the carbohydrates were added, the peak of lignin at 280nm by UV scanning spectra of the filtrate, was significantly increased. In order to determine the effect of ammonium sulfate on the ligninolytic activity, the isolated strain was incubated in the media containing 0.1%, 0.25% and 0.5% of nitrogen concentration in the Warburg flask and the rate of oxygen uptake was esitmated by Warbuge Respirometer. As a result, the activity was maximum at 0.1% of nitrogen concentration and thereafter decreased in parallel with nitrogen concentration.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.5
• /
• pp.356-364
• /
• 2000

Factors that affect the hardness of the zinc electrodeposits in the sulfate electrolyte were investigated. The hardness of zinc deposit was enhanced by increasing the concentration of impurities such as iron and nickel in the bath that changed the crystallographic orientation of the zinc deposit from the strong basal plane to the random orientation. The increase of the concentration of sodium sulfate and current density in iron contained bath improved the hardness of zinc deposit because those were easily codeposited in zinc layer. However the increase of the concentration of sodium sulfate up to 80g/$\ell$ in the bath darkened the surface of zinc electrodeposits due to change of morphology by the codeposition of iron.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.27-33
• /
• 1986

Atmospheric particulate matter (A. P. M.) was collected and size-fractionated by an Andersen high-volume air sampler over 15 month period from Jan. 1985 to Feb. 1986 in Seoul. The concentration of chloride, nitrate and sulfate were extracted in an ultrasonic bath and were analyzed by ion chromatography. The annual arithmetical mean of A. P. M. was 128.54 $\mug/m^3$. The concentration of anions were 2.88 $\mug/m^3$ for chloride, 3.86$\mug/m^3$ for nitrate, and 25.44$\mug/m^3$ for sulfate. The content of A. P. M. was lowest in the particle size range 1.1 $\sim 3.3\mum$ and increased as the particle size increased or decreased. And the anions exhibited a seasonal variation in the isize distribution. The contents of anions were higher in winter than summer. Ther ratio of fine particles to the total particles defined by F/T for chloride, nitrate and sulfate. The F\ulcornerT of these anion generally decrease with increasing air temperature. This tendency was prevalent in the chloride and nitrate.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.549-554
• /
• 2015

This study was conducted to determine the effects of mixed Korean red ginseng marc with aluminum sulfate on gas concentration and volatile fatty acid (VFA) in poultry litter during 4 weeks in terms of livestock and environment managements. A total of 240 broiler chicks were randomly allocated to four treatments in four replications and 15 birds per replicate. The four treatments was mixed to rice hull under each pen at 0, 10 g or 20 g red ginseng marc + 90g aluminum sulfate, and 100g aluminum sulfate per kg poultry litter (rice hulls). Carbon dioxide, methane, acetic acid, and propionic acids were measured weekly. The results that could be available include: First, during the experimental period, carbon dioxide emissions were not remarkably different among treatments. Second, no differences were observed among treatments in methane emissions at 2 weeks through 4 weeks, but at 1 week, the reduction in methane emissions was in following order: 100 g aluminum sulfate > 20 g red ginseng marc + 90 g aluminum sulfate > 10 g red ginseng marc + 90 g aluminum sulfate > control. Third, in spite of statistically differences, treatment with 10 g or 20 g red ginseng marc + 90g aluminum sulfate, and 100g aluminum sulfate reduced acetic acid and propionic acid as a function of time, except acetic acid in aluminum sulfate treatment at 2 and 4 weeks. In conclusion, the results indicated that like aluminum sulfate, using 10 g or 20 g red ginseng marc with aluminum sulfate was effective in decreasing methane and propionic acid released from poultry litter.

• New & Renewable Energy
• /
• v.5 no.4
• /
• pp.80-85
• /
• 2009

The effects of various organic wastes on anaerobic fermentative hydrogen production were studied using enriched mixed microflora in batch tests. Rotten fruit, corn powder and organic wastewater enriched with sulfate (up to 1,000 mg/L) were used for experiments. Maximum hydrogen production (547.1 mL) was observed from rotten apple with initial substrate concentration of 132.2 g COD/L. The experimental result on sulfate enriched organic wastewater indicated that hydrogen production is not adversely influenced by relatively high sulfate concentration. Residual sulfate content remained at 96-98 % after 75 hours of reaction, which showed that no major sulfate reduction was occurred at pH 5.3-5.5 in the reactor. The volatile fatty acid (VFA) fractions produced during the reaction was in the order of butyrate > acetate > propionate in all experiments. The results of this study would be useful for controlling the conditions on fermentative hydrogen production using different feedstocks.