• Title/Summary/Keyword: Suitable site selection

Search Result 111, Processing Time 0.029 seconds

Large Auricular Chondrocutaneous Composite Graft for Nasal Alar and Columellar Reconstruction

  • Son, Daegu;Kwak, Minho;Yun, Sangho;Yeo, Hyeonjung;Kim, Junhyung;Han, Kihwan
    • Archives of Plastic Surgery
    • /
    • v.39 no.4
    • /
    • pp.323-328
    • /
    • 2012
  • Background Among the various methods for correcting nasal deformity, the composite graft is suitable for the inner and outer reconstruction of the nose in a single stage. In this article, we present our technique for reconstructing the ala and columella using the auricular chondrocutaneous composite graft. Methods From 2004 to 2011, 15 cases of alar and 2 cases of columellar reconstruction employing the chondrocutaneous composite graft were studied, all followed up for 3 to 24 months (average, 13.5 months). All of the patients were reviewed retrospectively for the demographics, graft size, selection of the donor site and outcomes including morbidity and complications. Results The reasons for the deformity were burn scar (n=7), traumatic scar (n=4), smallpox scar (n=4), basal cell carcinoma defect (n=1), and scar contracture (n=1) from implant induced infection. In 5 cases of nostril stricture and 6 cases of alar defect and notching, composite grafts from the helix were used ($8.9{\times}12.5$ mm). In 4 cases of retracted ala, grafts from the posterior surface of the concha were matched ($5{\times}15$ mm). For the reconstruction of the columella, we harvested the graft from the posterior scapha ($9{\times}13.5$ mm). Except one case with partial necrosis and delayed healing due to smoking, the grafts were successful in all of the cases and there was no deformity of the donor site. Conclusions An alar and columellar defect can be reconstructed successfully with a relatively large composite graft without donor site morbidity. The selection of the donor site should be individualized according to the 3-dimensional configuration of the defect.

The Selection of House Site and Its Architectural Expression in the Chosun Dynasty : A Case Study of Confucianist Lee-sik's Taegpoongdang in Yangpyung, Kyungki-do (조선 중기 유가(儒家)의 세계관이 반영된 집터 선정과 건축적 표현 -양평군 소재 택당 이식의 택풍당을 중심으로-)

  • Sung, Dong-Hwan;Cho, In-Chul
    • Journal of the Korean association of regional geographers
    • /
    • v.11 no.3
    • /
    • pp.367-380
    • /
    • 2005
  • This paper aims to investigate the characteristics of house site selection and its expression of building through manuscript of Taegdanggip which was authored by Lee-sik in the middle of Chosun dynasty. Its results are summarized in the following. Firstly, as a Confucianist, Lee-sik selected his ancestor's grave site as well as his house site by means of divination sign. And then he interpreted the characteristics of the location from feng-shui perspective. Secondly, he built Taepoongdang(literally 'pond and wind house') as his house for retirement based on a trigram from the Book of Changes. He reflected the divination sign in consturcting his house Taekpoongdang. Finally, the location of Taekpoongdang and Baekagog village was well suitable to feng-shui theory.

  • PDF

Remote Sensing and GIS for Waste Disposal Site Selection in the Kathmandu Valley: A Case Study of Taikabu Area

  • Tuladhar, Ganga B.
    • Proceedings of the KSRS Conference
    • /
    • 2003.11a
    • /
    • pp.933-935
    • /
    • 2003
  • Geo-scientifically viable, environmentally suitable, and socially acceptable sanitary landfill sites are very limited in the Kathmandu Valley and is confronted with the burning problem of safe disposal of urban waste. This paper deal with the evaluation and assessment of its interface, following the major criteria defining suitable geological barrier, Cation Exchange Capacity and other necessary physical parameters with the optimum utilization of remotely sense data along with GIS techniques. The study revealed one of the most viable sites at the flat land of natural depression of Taikabu area and has potential to serve all the municipalities of the Kathmandu Valley.

  • PDF

The Suitable Region and Site for 'Fuji' Apple Under the Projected Climate in South Korea (미래 시나리오 기후조건하에서의 사과 '후지' 품종 재배적지 탐색)

  • Kim, Soo-Ock;Chung, U-Ran;Kim, Seung-Heui;Choi, In-Myung;Yun, Jin-I.
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.11 no.4
    • /
    • pp.162-173
    • /
    • 2009
  • Information on the expected geographical shift of suitable zones for growing crops under future climate is a starting point of adaptation planning in agriculture and is attracting much concern from policy makers as well as researchers. Few practical schemes have been developed, however, because of the difficulty in implementing the site-selection concept at an analytical level. In this study, we suggest site-selection criteria for quality Fuji apple production and integrate geospatial data and information available in public domains (e.g., digital elevation model, digital soil maps, digital climate maps, and predictive models for agroclimate and fruit quality) to implement this concept on a GIS platform. Primary criterion for selecting sites suitable for Fuji apple production includes land cover, topography, and soil texture. When the primary criterion is satisfied, climatic conditions such as the length of frost free season, freezing risk during the overwintering period, and the late frost risk in spring are tested as the secondary criterion. Finally, the third criterion checks for fruit quality such as color and shape. Land attributes related to these factors in each criterion were implemented in ArcGIS environment as relevant raster layers for spatial analysis, and retrieval procedures were automated by writing programs compatible with ArcGIS. This scheme was applied to the A1B projected climates for South Korea in the future normal years (2011-2040, 2041-2070, and 2071-2100) as well as the current climate condition observed in 1971-2000 for selecting the sites suitable for quality Fuji apple production in each period. Results showed that this scheme can figure out the geographical shift of suitable zones at landscape scales as well as the latitudinal shift of northern limit for cultivation at national or regional scales.

Regional Early Growth Performances of Planted Chamaecyparis obtusa Seedlings in Relation to Site Properties (편백 조림목의 입지 특성에 따른 지역별 초기 생육 특성)

  • Yang, A-Ram;Hwang, Jaehong;Cho, Min Seok
    • Journal of Korean Society of Forest Science
    • /
    • v.103 no.3
    • /
    • pp.375-382
    • /
    • 2014
  • The objective of this study was to investigate suitable plantation site for planted Chamaecyparis obtusa seedlings from the analysis of regional early growth performances. Two years old C. obtusa seedlings were planted with the density of $3,900seedlings{\cdot}ha^{-1}$ in late March, 2011 at Haeman and Jangseong, Jeollanamdo. In each study site, three plots ($400m^2$ per plot) were established and root collar diameter (mm) and tree height (cm) of each C. obtusa were measured in April, 2011 and October from 2011 to 2013. We also analyzed soil physical and chemical properties of sites and compartmental nitrogen and phosphorus concentrations of C. obtusa. Although the concentrations of soil nitrogen, organic matter, and C.E.C. at Haenam site were higher than those at Jangseong site, early growth performances of planted C. obtusa at Jangseong site were significantly better than those at Haenam site. The reasons for these results were probably related to deep available soil depth at Jangseong site and relatively low annual precipitation and sea wind at Haenam site, which was adjacent to the sea. The compartmental nitrogen and phosphorus concentrations of C. obtusa was in the order of needles > current twigs > fine root > stem and branches root above 2 mm in diameter. The phosphorus concentration of needles at Haenam site was significantly higher than that at Jangseong site. The results of this study might be useful for the selection of suitable plantation site for C. obtusa.

Study on Site Selection of A/R CDM Using LiDAR Data (LiDAR 자료를 이용한 A/R CDM 대상지 선정에 관한 연구)

  • Guishan, Cui;Park, Taejin;Lee, Woo-Kyun;Lee, Jongyeol;Kwak, Doo-Ahn;Kwak, Hanbin
    • Korean Journal of Remote Sensing
    • /
    • v.28 no.5
    • /
    • pp.587-596
    • /
    • 2012
  • Verifying about eligibility of targeted site is necessary for execute Afforestation and Reforestation Clean Development Mechanism (A/R CDM) project which is followed by system of Kyoto protocol. The site have to be identified by which could not be in conformity with definition of forest. This study tried to propose a technology of classify for site selection of A/R CDM. We chose several parts of Yangpyeng as study area and applied LiDAR data and remotely sensed imagery for considering about tree height, degree of crown closure, and land area which 3 factors for identify forest. LiDAR data was used for offset the shortage of remotely sensed imagery that cannot perfectly determine the forest definition due to absence of 3-dimentional information, but can be obtained from LiDAR. Considering tree height, degree of crown closure, and land area simultaneously by moving window, classified fields to forest and non forest based on pixel size. As a result, 124.06 ha for suitable to doing plantation and approximately 357.02 ha are in negative. Technology that applied for analyzing will provide fundamental methodology not only site selection for A/R CDM, but will be utilized in other Kyoto protocol.

A Study on the Land Suitability Analysis Based on Site Selection Variables using Macro Language (매크로 언어를 이용한 입지인자 변수조정에 따른 토지적합성 분석에 관한 연구)

  • Yi, Gi-Chul
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.6 no.1
    • /
    • pp.59-77
    • /
    • 2003
  • This study is to validate the use of macro language for the land suitability analysis aiming to help to resolve land use conflicts. The silver-town suitability analysis is conducted on the Geejang Gun, Busan Metropolitan city. Such digital maps as terrain, road, facility, and water body were created for various cartographic models. A cartographic model identified the best suitable areas for silver-town development based on the such site selection variables as a distance to facility and road, slope and aspect of terrain, land use etc. Then, the other cartographic model identified the most favorable site among the candidate sites based on the comparison of the aspect of proximity, usage and environmental quality. Macro language was used for these modeling process and was used for the manipulation of all these spatial variables used in the models to resolve land use conflicts relating to the decision making process of the final site selection. This study will improve the effectiveness and rationality of the traditional site suitability analysis.

  • PDF

Method to Select Tower Cranes Using Augmented Reality in Smart Devices (스마트 기기의 증강현실을 이용한 타워크레인 선정방안)

  • Ryu, Han-Guk;Choi, Heebok;Jang, Myung-Houn
    • Journal of the Korea Institute of Building Construction
    • /
    • v.14 no.5
    • /
    • pp.407-413
    • /
    • 2014
  • Appropriate selection of lifting equipments for a high-rise building construction project is one of the important factors to the project's success. Proper position of a tower crane on a construction site is so important to be determined by an expert or an experienced construction manager who draws working range of a tower crane and moves it over 2D(dimensional) site layout plan. 3D CAD, BIM, and virtual reality are is used for building design and construction, but it is not usual to use them for temporary facility planning or selection of a tower crane. This study proposes a suitable method to use augmented reality to select proper position of tower cranes. An augmented reality prototype is implemented by Vuforia and Unity 3D on a smart device to verify the practicability of the proposed method. The prototype application installed on a smart device shows several tower cranes on different markers in a real architectural drawing to locate the proper tower crane.

A Study on Comparison of Slope Revegetation Methods Through Value Engineering Analysis (가치공학분석을 통한 비탈면녹화공법 비교에 관한 연구)

  • Kim, Nam-Choon;Kim, Do-Hee
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.13 no.1
    • /
    • pp.93-102
    • /
    • 2010
  • Greening sometimes fails because its method is not suitable for various site conditions, therefore the trend of selecting a revegetation method in Korea today is through test construction. However, due to enlargement, complication and diversification of domestic construction businesses, the importance of VE is gradually increasing as effective efforts over a whole life-cycle to obtain goals such as quality improvement and cost reduction, and not only quality and economic efficiency but also substantiality need to be considered in comparing revegetation methods. For this study, Sungnam~Janghowon (area1), where comparatively various slope revegetation methods are used, was selected the investigation site. The site was divided into three areas:blasting rock, ripping rock and earth sand. The revegetation methods used were six in the blasting rock area, five in the ripping rock area, and two in the earth sand region. 2007 monitoring data was analyzed, and Value (V) was calculated with LCC related ratio, and compared and contrasted with the evaluation of prior revegetation methods. Therefore it is believed that this analysis enables selection of the most appropriate method, unbiased towards one particular characteristic such as quality, vegetation growth and economy. When aiming for a durable effect, it shall be more efficient to select the most appropriate method focusing on LCC analysis, which deals with the economic aspect, as well as the design function aspect.

Earthquake risk assessment methods of unreinforced masonry structures: Hazard and vulnerability

  • Preciado, Adolfo;Ramirez-Gaytan, Alejandro;Salido-Ruiz, Ricardo A.;Caro-Becerra, Juan L.;Lujan-Godinez, Ramiro
    • Earthquakes and Structures
    • /
    • v.9 no.4
    • /
    • pp.719-733
    • /
    • 2015
  • Seismic risk management of the built environment is integrated by two main stages, the assessment and the remedial measures to attain its reduction, representing both stages a complex task. The seismic risk of a certain structure located in a seismic zone is determined by the conjunct of the seismic hazard and its structural vulnerability. The hazard level mainly depends on the proximity of the site to a seismic source. On the other hand, the ground shaking depends on the seismic source, geology and topography of the site, but definitely on the inherent earthquake characteristics. Seismic hazard characterization of a site under study is suggested to be estimated by a combination of studies with the history of earthquakes. In this Paper, the most important methods of seismic vulnerability evaluation of buildings and their application are described. The selection of the most suitable method depends on different factors such as number of buildings, importance, available data and aim of the study. These approaches are classified in empirical, analytical, experimental and hybrid. For obtaining more reliable results, it is recommends applying a hybrid approach, which consists of a combination between methods depending on the case. Finally, a recommended approach depending on the building importance and aim of the study is described.