• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.1
• /
• pp.11-18
• /
• 2008

The Geumsan is contiguous to Daejeon and population is decreasing every year. Consequently, the population influx, and securing source of revenue dimensional geographic and environmental benefits of the establishment of a pensions plan for the rural life style pensions research. The result is that Geumsan has a convenient traffic circumstance geographically and is a clean area as the high-level area of solid water system. Also, Geumsan forms the mountainous area whose sea-level elevation reaches to 2.5 times of the Chungcheongnam-do. Consequently, Geumsan has a suitable environment for locating many kinds of pensions like the riverside village style, the mountain village style and the villa style, the country style, the cafe style, experience style, theme style etc. So, Geumsan is found to be a suitable area to host 'rural life style' pensions, because it has wide area, small population and nice environmental conditions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.27-37
• /
• 2001

Using satellite image and GIS, spatial distribution characteristics of black locust forest as honey plant area was identified and analyzed. Upon the result, the most suitable area for black locust forest was selected through the integration analysis of transparent overlay. The variables used for spatial analysis such as topography(elevation, aspect, slope), soil, drainage, distance from urban area, land use, meteorological elements were considered. Based on the suitability analysis, it was clarified that the integration of linear and factor combination technique is greatly efficient method for the most suitable area. In addition, Gokung, Imgo, Chungtong, Hwanam area were shown to be suitable in Young-chun Area. As the result of suitability analysis for honey plant area of black locust in Young-chun using satellite image and GIS, the present portion of potential distribution area was produced about 42.53%. The portion of most suitable area for honey plant area of black locust was about 26.77%. Finally, the total area for honey plant area of black locust in Young-chun came up to $15.79km^2$. Additionally, satellite image and GIS were expected to be significant tools for suitability analysis of honey plant complex area.

• Journal of Forest and Environmental Science
• /
• v.39 no.2
• /
• pp.65-72
• /
• 2023

The endangered species of Cyathea spinulosa (tree ferns) are among the least concerned ferns of Nepal that bring threats to them and their habitat. A way to reduce such threats is by maintaining a database of species' whereabouts and generating a scientific understanding the habitat preferences. This will eventually help in the formulation of conservation plans for the species. This research aimed to characterize the suitable habitat of C. spinulosa by enumerating the location of species in the Panchase Forests of central Nepal. The statistical index method was applied to relate the occurrence locations of species with various environmental factors for the development of indices. The suitable habitat of C. spinulosa (more and most suitable categories) covered 119 km² and accounted for 43% of the total area studied. 74.4% of occurrence locations of C. spinulosa were recorded from these habitats. The habitat characteristics suitable for C. spinulosa were: proximity to streams (high moisture), land covered by forested area (shady area), mid-elevations of hills about 1,000 m to 2,000 m (sub-tropical climate), slope gradient of 20° to 40° (steep slopes), and northern to eastern aspects. These habitat characteristics could be considered for in-situ protection of tree ferns and designating the conservation plots.

• Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.316-323
• /
• 2022

Background: We developed a habitat suitability index (HSI) model for Pedicularis hallaisanensis, a Grade II Endangered Species in South Korea. To determine the habitat variables, we conducted a literature review on P. hallaisanensis with a specific focus on the associated spatial factors, climate, topography, threats, and soil factors to derive five environmental factors that influence P. hallaisanensis habitats. The specific variables were defined based on the collected data and consultations with experts in the field, with the validity of each variable tested through field studies. Results: Mt. Seorak had a suitable habitat area of 2.48 km² for sites with a score of 1 (0.62% of total area) and 0.01 km² for sites with a score of 0.9. Mt. Bangtae had a suitable habitat area of 0.03 km² for sites with a score of 1 (0.02% of total area) and 0 km² for sites with a score of 0.9. Mt. Gaya showed 0.13 km² of suitable habitat for sites with a score of 1 (0.17% of total area) and 0 km² for sites with a score of 0.9. Lastly, Mt. Halla showed 3.12 km² of suitable habitat related to sites with a score of 1 (2.04% of total area) and 4.08 km² of sites with a score of 0.9 (2.66% of total area). Mt. Halla accounts for 73.1% of the total core habitat area. Considering the climatic, soil, and forest conditions together with standardized collection sites, our results indicate that Mt. Halla should be viewed as a core habitat of P. hallaisanensis. Conclusions: The findings in this study provide useful data for the identification of core habitat areas and potential alternative habitats to prevent the extinction of the endangered species, P. hallaisanensis. Furthermore, the developed HSI model allows for the prediction of suitable habitats based on the ecological niche of a given species to identify its unique distribution and causal factors.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.187-198
• /
• 2020

This study extracted deforestation area and degraded forestland area, which are potential REDD+ (Reducing Emissions from Deforestation and Forest Degradation) project candidate areas in Paraguay using Land Cover Map (LCM) and Tree Cover Map (TCM). The REDD+ project objectives scenarios were set three stages: 'afforestation and economic efficiency scenario', 'local capacity reinforcement scenario', and 'Infrastructure-oriented scenario'. And then, we evaluated the project unit suitable area of the REDD+ project. All scenarios selected the evaluation factors for each scenario in addition to the area ratio factors for deforestation area and degraded forestland area and weighted values were extracted by assigning category scores. As a result of the three scenarios comparison analysis, Concepcion state score was the highest. Within Concepcion state, the Belon district had the highest score, making it appropriate as a project unit REDD+ project candidate area in Paraguay, while the San Carlos district had the lowest score. This study can be used as basic data for selecting REDD+ project candidate area in Paraguay, and it is expected to contribute sufficiently to REDD+ project if additional data or information of social, cultural and economic sectors are secured.

• Fisheries and Aquatic Sciences
• /
• v.21 no.12
• /
• pp.36.1-36.11
• /
• 2018

Background: To confirm whether shellfish are suitable for consumption, the quality of seawater and shellfish in shellfish-producing areas must be assessed regularly. This study was conducted to evaluate the bacterial quality on the Changseon area, containing a designated shellfish-producing area, in Korea during 2011-2013. Result: Even though many inland pollutants near the area were identified, they showed no significant impact on the designated area and the shellfish therein. The concentrations of fecal bacteria in all the seawater and mussel samples from the designated area during the harvesting season were within the standards of various countries. Pathogenic bacteria were not detected in any of the mussel samples. In our previous study, the hazardous metal levels in all the mussels from the same area were also within the limits of different countries. Conclusion: The mussel products in this area are suitable for consumption based on fecal pollution, pathogenic bacteria, and also heavy metals.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.198-205
• /
• 2014

As the development of information technology, the interests in tiny applications such as wearable devices, portable devices and RFID are increased and the importance of low-area encryption circuit is emphasized. This paper proposes a compact architecture of AES-based encryption circuit suitable for tiny applications. The circuit area is reduced by minimizing storage space and sharing computation resources. The synthesized gate-level circuit using 65nm standard cell library consists of 2,241 gates and two $8{\times}16$-bit SRAMs. It can process data at a rate of 50.57Mbits per second. Therefore, the proposed encryption circuit is suitable for various applications requiring very small encryption circuit.

• ETRI Journal
• /
• v.44 no.4
• /
• pp.543-559
• /
• 2022

To determine a suitable waveform for Internet of Things (IoT) transmission over low-Earth orbit (LEO) satellites, this paper reports the results of a performance comparison between chirp spread spectrum (CSS)-based LoRa and direct sequence spread spectrum (DSSS)-based Ingenu. The performance of both waveforms was measured in terms of the packet error rate, throughput, and packet loss rate, considering the Doppler effect caused by the high speed of LEO satellites and the interference among multiple terminals. Simulation results indicate that the DSSS scheme is more suitable than the CSS scheme for high-traffic IoT services because of its robustness against interference among multiple terminals. However, the CSS scheme is more suitable than the DSSS scheme for high-mobility IoT services because of its robustness against the Doppler effect. We discuss various solutions, such as the preprocessing of Doppler effect and avoidance of packet collision, to enhance the performance of the DSSS and CSS schemes. The simulation results of the proposed solution show that the enhanced DSSS scheme can be a proper waveform in IoT transmission over LEO satellites for both the high-traffic and high-mobility services.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.326-326
• /
• 2022

Natto is a soybean fermented food from Japan, which is made from steamed soybean, Bacillus natto and water. Demand of Natto has increased recently because it does not have smell compared to Cheonggukfang, which is Korean traditional fermented food. Currently, Pungsannamulkong is the most commonly used in Korea for Natto. Four candidate varieties of soybeans were investigated and compared in terms of Agronomic Traits, quality characteristics, hard seed rate, and water absorption rate in order to determine more suitable Korean soybean variety than pungsannamulkong. 'Haewon' had higher yield than other three varieties in Goesan-gun and Jinan-gun. The infected seed rate which affects soybean processing is higher in pungsannamulkong. 'Haewon' showed low 100 seed weight with 8.6 g in Goesan-gun and 9.5 g in Jinan-gun, which was the smallest of four soybean varieties. The water absorption rate was higher in 'Haewon' than in pungsannamulkong which is desirable characteristics for Natto process. The hard seed rate of pungsannamulkong was 6~7%, which is considered to be unsuitable to Natto process. The yield of Natto was significantly different for each variety. 'Haewon' showed the highest amino nitrogen content with 575.0 mg%. These results suggested that 'Haewon' can be considered as suitable candidates for yield and quality of Natto compared to pungsannamulkong.

• The korean journal of orthodontics
• /
• v.23 no.1 s.40
• /
• pp.1-15
• /
• 1993

This study was undertaken to investigate the midline having the least difference between the right and left structures among the lines that had been used in the study of the craniomaxillofacial asymmetry. The sample of this study consisted of twenty six Korean girls(average 18.9 years old) having normal facial appearance and occlusion. On the frontal cephalometric films of the sample, we divided the whole craniomaxillofacial area into four portions, i.e., cranial, upper facial, lower facial, and dental portion. So, we have found the midlines having the least difference in the whole craniomaxillofacial area itself, and in the each divided four portions, furtherly in the other portions from aimed portion. The findings were as follow: 1. In the whole craniomaxillofacial area, the connecting line between crista galli and anterior nasal spine and the perpendicular bisecting line between right and left foramen rotundums were suitable for the midline. 2. In the cranial portion, established all six lines were suitable for midlines. In the other portions, the perpendicular bisection line between both condylion, the line passing the contact point between right and left mandibular central insisiors among the perpendicular lines between right and left mandibular central incisial tips were suitable midlines fer evaluating the asymmetry of cranial portion. 3. In the upper facial portion, the perpendicular bisecting line between right and left zygions was the most suitable midline. In the other portions, the line between the crista galli and the most superior point of the odontoid process, the perpendicular bisecting line between right and left gonions, the perpendicular bisecting line between right and left condylions, and perpendicular bisecting line between right and left foramens rotundum were suitable midlines for evaluating the asymmetry of the upper facial portion 4. In the dental portion, the perpendicular bisecting lines between right and left buccal cusps of both maxillary first molars and between right and left mandibular first molars were suitable midlines. In the other portions, the perpendicular bisecting line between right and left landmarks crossing the lesser wing of the sphenoid bone and orbit, the perpendicular bisecting line between right and left mental foramens, and the connecting line between crista galli and prosthion were suitable midlines for evaluating the asymmetry of dental portion. 5. In the lower facial portion, the perpendicular bisecting lines between right and left condylions and between right and left gonions were suitable midlines. In the other portions, the line between the crista galli and anterior nasal spine, the perpendicular bisecting line between right and left foramen rotundums, and the perpendicular bisecting lines between right and left buccal cusps of both mandibular first molars and between right and left maxillary first molars were suitable midlines for evaluating the asymmetry of the lower facial portion.