• 한국컴퓨터정보학회논문지
• /
• 제25권6호
• /
• pp.91-98
• /
• 2020

급제동 시 추돌사고를 방지하기 위하여 비상등 자동작동 기능이 없는 기존 차량에 손쉽게 추가장착이 가능한 비상등 자동작동 시스템을 제안하였다. 급제동을 인식하기 위해서는 몇 가지 방법이 있지만 GPS를 사용하면 시스템이 터널에서 작동하지 않으며 차량 속도 센서를 사용하면 기존 차량에 시스템을 추가로 설치하기 어렵다. 따라서 제안한 시스템은 가속도 센서를 사용하여 이러한 문제점들을 제거하고 차량의 급회전 및 급바운스도 인식 할 수 있도록 하였다.

• Wind and Structures
• /
• 제19권1호
• /
• pp.1-14
• /
• 2014

Rail-mounted cranes can be easily damaged by a sudden gust of wind while working at a running speed, due to the large mass and high barycenter positions. In current designs, working rail-mounted cranes mainly depend on wheel braking torques to resist large wind load. Regular brakes, however, cannot satisfactorily stop the crane, which induces safety issues of cranes and hence leads to frequent crane accidents, especially in sudden gusts of wind. Therefore, it is necessary and important to study the braking performance of working rail mounted cranes under wind load. In this study, a simplified mechanical model was built to simulate the working rail mounted gantry crane, and dynamic analysis of the model was carried out to deduce braking performance equations that reflect the qualitative relations among braking time, braking distance, wind load, and braking torque. It was shown that, under constant braking torque, there existed inflection points on the curves of braking time and distance versus windforce. Both the braking time and the distance increased sharply when wind load exceeded the inflection point value, referred to as the threshold windforce. The braking performance of a 300 ton shipbuilding gantry crane was modeled and analyzed using multibody dynamics software ADAMS. The simulation results were fitted by quadratic curves to show the changes of braking time and distance versus windforce under various mount of braking torques. The threshold windforce could be obtained theoretically by taking derivative of fitted curves. Based on the fitted functional relationship between threshold windforce and braking torque, theoretical basis are provided to ensure a safe and rational design for crane wind-resistant braking systems.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.203-211
• /
• 2002

ABS (Anti-lock Braking System) is a safety device for preventing wheel locking in a sudden braking. It consists of hydraulic modulator, ECU(Electronic Control Unit) and angular velocity sensors. Its control methods are classified into three types; deceleration control, slip ratio control and deceleration/acceleration control. In this paper, ABS mounted vehicle is mathematically modeled and the proposed model is verified by actual cars experiments, and the braking characteristics of the control methods with pulse width modulation are compared and analyzed through computer simulations.

• 대한교통학회지
• /
• 제29권3호
• /
• pp.115-122
• /
• 2011

이 논문은 자동차의 급제동시 발생되는 스키드마크(skid mark, 활주거리)를 통해 제동직전 속도(Pre-braking Speed)를 정확히 산정하기 위한 방법론을 제시하고자 한다. 운전자는 전방에 위급한 상황이 전개되거나 불의의 사고에 처하게 되었을 경우 통상 급제동조치를 취하게 되며, 정지거리에 따라 사고를 당할 수도 있다. 자동차의 정지거리에 있어서 영향을 끼치는 요인은 운전자의 인지반응시간, 자동차 제동장치의 성능, 노면의 상태 등을 꼽을 수 있으나, 가장 중요한 요인은 제동직전 속도(Pre-Braking Speed)라고 할 수 있다. 현재 교통사고의 조사분야에서는 skid mark의 길이에 근거한 활주직전 속도(Preskidding Speed)를 산정하여 과속 여부를 판단하고 있으나, 정확한 사고원인 규명을 위해서는 불완전제동시간 동안 감속된 속도를 고려한 제동직전 속도의 산정이 필요할 것으로 판단된다. 따라서, 본 연구에서는 교통사고시 자동차의 정확한 속도정보를 산정하기 위한 방법을 제안하고자 하며, 또한 이 연구가 향후 교통안전차원에서 자동차의 특성을 이해하는데 있어서 일조할 수 있기를 기대한다.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.81-90
• /
• 1995

Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about characteristics of a solenoid valve in hydraulic modulator for controlling brake pressure. First, it was modeling the electromagnet by the permeance method. Second, it was modeling the commercial Maxwell poackage program. And then, a experiment was performed in order to justify modeling. The result of modeling coincided with teh result of experiment and commercial packabe program. As a result, these modelings will be able to use in analysis of dynamic character- istics of the solenoid valve for braking.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.48-55
• /
• 2019

The Electronic Stability Program (ESP), a system that improves vehicle safety, also known as YMC (Yaw Motion Controller) or VDC (Vehicle Dynamics Control), is a system that operates in unstable or sudden driving and braking situations. Developing conditions such as unstable or sudden driving and braking situations in a vehicle are very dangerous unless you are an experienced professional driver. Additionally, many repetitive tests are required to collect reliable data, and there are many variables to consider such as changes in the weather, road surface, and tire condition. To overcome this problem, in this paper, hardware and control software such as the ESP controller, vehicle engine, ABS, and TCS module, composed of three control zones, are modeled using MATLAB/SIMULINK, and the vehicle, climate, and road surface. Various environmental variables such as the driving course were modeled and studied for the real-time ESP real-time simulator that can be repeatedly tested under the same conditions.

• 대한교통학회지
• /
• 제30권5호
• /
• pp.83-90
• /
• 2012

운전자가 위급한 상황을 인지하였을 경우 일반적으로 가장 먼저 급제동 조치를 취하게 된다. 그렇기 때문에 교통사고 현장에서 가장 흔하게 볼 수 있는 흔적이 급제동흔적, 즉 스키드마크라 할 수 있다. 오늘날까지 스키드마크의 길이를 측정해서 사고 당시 속도를 추정하고 이를 통해 과속 여부를 판단하고 있다. 그러나 스키드마크의 길이를 통해 추정된 속도는 불완전 제동구간의 감속정도를 배제한 활주직전의 속도로써 제동직전 속도와는 다소 차이를 보인다. 최근 연구에서 제동직전 속도를 추정하기 위해 실차 실험을 통해 몇가지 방법이 제시되었으나, 물리적 원칙에 입각하여 제동직전 속도를 산정할 수 있는 근본적인 방법을 제시하지 못하였다. 그 중에서도 가장 핵심적인 사항이 불완전 제동구간과 활주구간의 감속도를 파악하는 것이며, 본 연구에서는 승용차와 대형차의 실차 급제동 실험을 통해서 불완전 제동구간과 활주구간의 감속도 경향을 분석하였다. 본 연구는 자동차의 실질적인 제동직전 주행속도를 산출할 수 있도록 기초정보를 제공하고 나아가서는 현행보다 과속 적용의 범주가 확대됨에 따라 운전자의 경각심을 유발하여 국가 교통사고 감소에 일조할 수 있을 것으로 기대된다.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.71-77
• /
• 2007

Dangerous driving is a major cause of traffic accidents in Korea. It becomes more serious for commercial vehicles due to higher fatality rates. The Safe Driving Management System (SDMS), developed in this research, is a comprehensive solution that monitors and stores driving conditions of vehicles, detects dangerous driving situations, and analyzes the results in real time. The Safe Driving Management System consists of a vehicle movement information controller, a dangerous driving detection algorithm and a vehicle movement data report and analysis program. The dangerous driving detection algorithm detects and classifies dangerous driving conditions into representative cases such as sudden acceleration, sudden braking, sudden lane change, and sudden turning. Both computer simulation and vehicle test have been conducted to develop and verify the algorithm. The Safe Driving Management System has been implemented on commercial buses to verify its reliability and objectivity. It is expected that the system can contribute to prevention of traffic accidents, systemization of safe driving management and reduction of commercial vehicle operation costs.

• 대한안전경영과학회지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2018

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.211-215
• /
• 2010

Continuous contraction and expansion of disk brake can be due to friction and temperature difference at repeated sudden braking. As serious vibration at disk is produced, the braking force will be changed ununiformly and braking system can not be stabilized. Temperature and heat flux at disk brake are investigated by structural and thermal analysis in this study. The maximum equivalent stress and displacement are shown respectively at the ventilated hole and the lower part of disk plate. At thermal analysis of initial state, temperature on disk plate is distributed from $95.9^{\circ}C$ to $100^{\circ}C$. The maximum heat flux of $0.0168W/mm^2$ is shown at the inner friction part between disk plate and pad. At thermal analysis of transient state, temperature on disk plate is distributed from $95^{\circ}C$ to $96.5^{\circ}C$ after 100 second. The maximum heat flux of $0.0024W/mm^2$ is also shown at the inner friction part between disk plate and pad. By comparing with initial state, the temperature on disk plate is more uniformly distributed and heat flux is more decreased by 7 times at transient state.