• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.495-505
• /
• 1995

The O/W microemulsion systems were made from 2 or 4% (w/w) oil (soybean oil, olive oil or isopropyl myristate) and 10, 15 or 20% (w/w) Brij 96. They were compared with micellar solution of equivalent surfactant concentration m therms of physicochemical properties, and the solubilization of sudan IV. They were characterized by dynamic light scattering, stability, surface tension, viscosity and rheogram. The mean diameters of O/W microemulsion systems were 10-15nm, and those of Brij 96 micellar solutions were 18-19 nm. Both of them were monodisperse systems. The O/W microemulsion systems showed Newtonian flow and their apparent viscosities were lower than those of micellar solutions. The surface tensions of O/W microemulsion systems were increased or decreased depending on the types of oil used, when compared with those of micellar solutions. The O/W microemulsion systems were very stable, and did not show any flocculation or aggregation. Their mean diameters were not changed after three months. But oxidation was observed in microemulsions without nitrogen gas at high temperature. There was a significant improvement in the sudan IV solubffimtion in micromulsion compared with that m the micellar solution containing equivalent concentration of surfactant. The size distribution and mean diameters of O/W micromulsions were not changed when sudan IV was solubilized.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.279-279
• /
• 1996

Sudan IV는 2시간 관류시키는 동안 약 30%의 농도감소를 보였다 Sudan IV자체는 물에 녹지않고 리포솜에 의해서 가용화 되는 물질이기 때문에 관류액중에서 리포솜으로부터 release out되지 않는다. 따라서 situation I의 가능성은 희박하며 또 그 자체로는 물에 거의 녹지않아 흡수되지 않을 것으로 예상되는 물질이므로 Sudan IV의 관류액으로부터의 소실은 곧바로 situation II를 반영할 것이다. 또 리포솜의 구성물질인 PC역시 관류액중에서 농도감소를 나타내었는데 이로부터 난용성약물을 봉입한 리포솜이 어떻게 장관으로 흡수되는 지 예상할 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.375-381
• /
• 2008

This study developed the simultaneous analysis method for efficient safety controls of import food of Orange II, Rhodamine B, Para Red, and Sudan dye I-IV among disapproved coloring agents that use is prohibited in foods. The analysis method was developed according to the sample pre-treatment and HPLC conditions, and a documentary survey was used to establish the detection limit of the method, followed by effectiveness verification and recovery percentage examinations. Recovery percentage examination for 26 products resulted Orange II displayed recovery percentage of 96.46-121.26%, Rhodamine B displayed recovery percentage of 70.86-106.53%, Para Red displayed recovery percentage of 97.00-116.86%, Sudan I displayed recovery percentage of 92.93-112.44%, Sudan II displayed recovery percentage of 96.63-115.10%, Sudan III displayed recovery percentage of 92.21-114.73%, Sudan IV displayed recovery percentage of 93.22-122.91%. Correlation coefficient of gradient of this analysis method exhibited more than 0.999, RSD exhibited fewer than 2 as 0.8-1.39%, exactitude exhibited more than 90%. At this time, detection limit and fixed quantity limit decided by each 0.1 mg/L, 0.3 mg/L.

• YAKHAK HOEJI
• /
• v.32 no.4
• /
• pp.234-238
• /
• 1988

Proliposome of Sudan IV was prepared according to Payne et al. and evaluated for it's size distribution, surface characteristics and conversion to liposome in aqueous medium. The manufacturing procedures for proliposomes involve the coating of phospholipid solution with Sudan IV on the surface of sorbitol particle in rotary vacuum evaporator. As a result, dry, free flowing and stable proliposome was obtained and multi-lamellar liposome of sudan IV was formed spontaneously when water were added to this. Proliposomes were expected as a probable answer for the physical instability of conventional liposomes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.549-552
• /
• 2004

A simple, efficient and accurate method was developed for the simultaneous determination of non-permitted oil soluble colorants (sudan I, II, III and IV) in foods. The identification has been carried out for sudan colorants by TLC as well as HPLC with photodiode array (PDA) detection. Separation of sudan colorants was achieved within 20 min by a gradient elution with water and acetonitrile as eluents. Sudan colorants showed good linear relationships in the range of 0.1 ～ 100 $\mu\textrm{g}$/mL. The correlation coefficients of the calibration curve for sudan colorants exceeded 0.999. The detection limits (signal-to-noise ratio 3 : 1) for sudan I, II, III and IV were 0.01, 0.01, 0.02 and 0.02 $\mu\textrm{g}$/mL, respectively. This method has been successfully applied to the analysis of red pepper powder, Kimchi and Kakdugi, and the average recoveries for real samples ranged from 83.02% to 104.3%.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.165-172
• /
• 2002

Injectable gel composed of egg phosphatidylcholine (egg PC), hyaluronate (HA) and water was formulated for local drug delivery. The lamellar liquid crystalline structure of the egg PC/water system did not change by adding HA in the formulation. However, egg PC/HA/water gel was more resistant to erosion than the egg PC/water gel. The egg PC/HA/water and egg PC/water gels containing model drugs, tetracycline and sudan IV were prepared to perform in vitro and in vivo drug release experiments. In vitro release of tetracycline was sustained in the gel type formulations. The release rate of hydrophobic sudan IV was extremely slow. More than 99% of sudan IV remained inside the gel after 5 days. In vivo release of drugs from the air pouch model in Balb/c mice shows that lipophilic sudan IV remained for more than 10 days whereas tetracycline remained for 1 day in the pouch. The compatibility of the gels was also examined by histopathology. The gels did not cause any adverse inflammatory effect in the air pouch.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.33-42
• /
• 2015

Pitches contained in thermomechanical pulp negatively influence paper qaulity and pulp and papermaking process. Without controlling TMP pitches suitably, it is hard to make a certain quality of paper. In order to control pitches in TMP, they must be quantitatively recognized by proper tools. One of the most widely used way to detecting TMP pitches is a staining method using a hydrophobic dye such as Sudan IV. Sudan IV could be used with three different protocols including different application of its dissolution, washing, dyeing time, etc. The dyeing protocols were classified into three categories including Stain I, Stain II, and Stain III. In dyeing time, Stain I required more than 24 hours to dye pitches. On the other hand, Stain III could stain TMP pitches with the most brief way. The images of red-stained pitches could be captured by a stereomicroscope with ${\times}35$ and ${\times}45$ magnifications, and then quantitatively analysed measuring their numbers and areas by Carl Zeiss AxioVision (ver. 4.8.2) program. Among three protocols, both Stain I and Stain III were the most ideal methods to detect TMP pitches because they detected more pitches and bigger pitch areas compared to Stain II against the same specimen. In particular, it was recognized that Stain III could be used as the most useful tool to detect TMP pitches accurately within several minutes.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.212-218
• /
• 2016

The research was conducted windward of an irrigated Acacia amplicips Maslin windbreak established to protect As Salam Cement Plant from winds and moving sands. Two belts with approximate optical porosities of 50% and 20% were studied in River Nile State, Sudan. The research aimed at assessing the efficiency of the two belts in wind speed reduction and sand deposition. Research methods included: (i) estimation of optical porosity, (ii) measurements of windward wind speeds at a control and at distances of 0.5 h (h stands for windbreak height), 1 h and 2 h at two vertical levels of 0.25 h and 0.5 h, (iii) estimation of relative wind speeds at the three positions (distance and height) at windward and (iv) estimation of wind erosive forces and prediction of zones of sand deposition. Results show that while the two belts reduced windward wind speeds at the two levels for the three distances, belt II was more effective. Nearest sand deposition occurred at 2 h and 1h windward of belt II and belt I, respectively, at level 0.25 h. At level 0.5 h, sand was deposited only at 2 h windward of belt II and no sand deposition occurred windward of belt I. The study concludes that less porous windbreaks are more effective in reducing wind speed and in depositing sand in windward direction at a distance of not less than twice the belt height.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.72.1-72
• /
• 2003

Generally, plants defend themselves against pathogens by structural and biochemical reactions. Defense structures act as physical barriers and inhibit the pathogen from gaining entrance and spreading through the plant. Xanthomonas axonopodis pv glycines, the causal pathogen of bacterial pustule of soybean, causes hypersensitive response (HR). When pepper fruits were inoculated with X. axonopodis pv. glycines, in situ, time-series defense-related structural changes occurred in the inoculated sites. Early responses were programmed cell death (PCD), characterized by condensation and vacuolization of the cytoplasm, condensation of nuclear materials, and fragmentation of the nuclear DNA, which were observed by transmission electron microscopy. Nuclear fragmentation was proven by TUNEL method under confocal laser scanning microscopy and DNA laddering through eletrophoresis. At later stages, plant responses were cell elongation and cell division, forming a periderm-like boundary layer that demarcated healthy tissues from the inoculation sites. Using several stains such as toluidine blue, sudan IV, annexin V, and phloroglucinol-HCl, defense-related materials and structural changes were also examined.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.3
• /
• pp.1-12
• /
• 2007

This study was investigated hazardous substances in agricultural products of baggage by Incheon Port from chinese. We tested 293 kinds of dried red pepper, cereal, sesame, bean, nut, herbal medicine and sesame oil for pesticides residue, mold, tar color, sudan I, II, III, IV, aflatoxin, Pb, Cd, Hg, As and sulfur dioxide residues. Violated samples over standard limits by Korean Food and Drug Administration (KFDA) were 76 dried red pepper over the number of mold and 1 dried red pepper detected red 102 tar color and 1 dried red pepper over the number of mold and detected red 102 tar color simultaneously. And 2 rice, 1 sticky rice, 1 adlay and 1 millet were over lead. Violated herbal medicine were 2 Zizyphi Furctus and 2 Zingiberis Rhizoma over sulfur dioxide residue and 1 Zingiberis Rhizoma over sulfur dioxide residue and cadmium simultaneously. The contents of heavy metals in cereal were as follow; $Pb\;0.000{\sim}0.740mg/kg(0.191{\pm}0.209),\;Cd\;0.000{\sim}0.108mg/kg(0.007{\pm}0.020),\;Hg\;0.000{\sim}4.201mg/kg(0.162{\pm}0.319)$. The contents of heavy metals in herbal medicine were as follow; $Pb\;0.000{\sim}2.480mg/kg(1.130{\pm}0.730),\;Cd\;0.000{\sim}0.761mg/kg(0.044{\pm}0.122),\;Hg\;0.000{\sim}0.157mg/kg(0.022{\pm}0.033),\;As\;0.000{\sim}0.560mg/kg(0.040{\pm}0.082)$. Contents of $SO_2$ ranged $2.0{\sim}1459.4ppm(303.1{\pm}324.2)$.