• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.196-201
• /
• 1997

In point of noise and vibration, it is easy to occur a noise and vibration, because the reciprocal compressor is composed of crank shaft, rod piston and etc. Therefore, it is important to understand the mechanism of reciprocal compressor. In this study, we measured the sound pressure level of compressor. There are two dominent frequencies. The first of one results from the suction part. In suction process, the suction valve flutteres, and it produces the noise of the first frequency. The other results from the structural vibration of the shell resonated by discharge pipe. Thus, to reduce the noise of compressor, it will be most efficiency to redesign muffler for the first frequency and discharge pipe for the second frequency.

• 대한기계학회논문집B
• /
• 제36권10호
• /
• pp.989-999
• /
• 2012

이젝터는 고압의 유체를 구동관로에서 분출시켜, 그 주변의 저압기체와 운동량 교환을 통하여 저압의 유체를 보다 높은 압력까지 상승시켜 흡인되는 유체를 이송하는 장치이다. 증기-증기 이젝터는 흡입, 혼합 및 탈수에 널리 사용되고 있다. 그리고 이젝터는 기계적인 작동이 없으므로, 고장이 거의 없다. 또한 이젝터는 유체 관련 시스템의 크기에 관계없이 유체와 관련된 다양한 장소에 용이하게 설치할 수 있어, 정비의 필요성이 거의 없고 비용도 합리적이다. 따라서 본 연구는 단순 압축 또는 진공 설비를 위한 펌프 혹은 기계장치 대안으로 사용되는 이젝터 전체에 적용할 수 있는 기초 자료 제공을 목표로 하였다. 이 목표를 위해 실험만으로 획득할 수 없는 자료를 전산유체역학을 적용하여 분석함으로써 이젝터의 유체역학적 특성에 있어 최적의 설계조건을 제시하였다.

• 한국농공학회지
• /
• 제15권2호
• /
• pp.3002-3006
• /
• 1973

암거배수 연구는 오래전부터 해왔다. 우리나라에서는 PVC흡수관으로 제4차 시험을 했다. 제일 먼저 3배수구와 3무배수구를 설정하고 배수 방법, 토양온도, 작물의 생육, 수량등을 비교 시험하였다. 시험 방법과 결과는 다음과 같다. 1. 방법 (1) 관 길이=1m (2) 거리 = 6.5m (3) 경사 = 1/200 (4) 지수벽 깊이 : 2.5m (5) 공시품종 : 밀성 (6) PVC흡수관리 filter는 Glass nylon으로 감는다. 2. 결과 (1)지온: 전관개 기간을 통하여 배수구에서는 평균 $1.5^{\circ}C$상승하고 10일간에 최고 $2.6^{\circ}C$ 상승할 때도 있었다. (2) 수량에서는 3개 시험구를 평균한즉 20%의 증수를 얻었다. (3) 경제적 면으로 볼 때 1ha당 증수액(95,622원) 시공비(13,005원)=82,900원의 증수익이 있었다. (4) 우리나라에서 암거배수를 필요로 하는 습담의 면적은 약 20만ha이다.

• 소음진동
• /
• 제9권4호
• /
• pp.795-805
• /
• 1999

Rubber mounts so called grommets and pipes are two major paths of vibration transmission from a compressor, an important vibration source in an air conditioner, to the whole unit. A procedure of configuring the suction and discharge pipes of the compressor was developed in this paper so as to reduce the vibration transmission through the pipes as well as the grommets. Through investigating the effects of shapes and connecting disrections of pipe elements on vibration transmission, a guideline to configure the pipe layout, which enables to reduce vibration transmission, was proposed. The initial pipe layout by the guideline was optimized with the objective function, minimization of boty vibration transmission and the cost, and with the constraints to yield the final dimensions of the pipes. The procedure not only minimizes the transmitted force to the circumferential devices but enables to eliminate rubber blocks or dampers, which are generally used to avoid resonances of the pipe system.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.71-81
• /
• 2020

해상 교량기초용 대형 원형강관 가설공법은 가물막이와 작업대의 역할을 함께 수행할 수 있는 공법으로 개발되었다. 본 연구의 목적은 현장실험을 통해 시공과 운용 중 대형 원형강관의 안정성을 모니터링하기 위한 무선 원격계측시스템을 검증하는 것이다. 현장실험을 위해 수심 4m의 인공 해상 지반을 조성하였으며, 직경 5m, 높이 9.5m인 대형 원형강관을 석션 관입하였다. 대형 원형강관의 근입 깊이는 5m이다. 경사계와 변형률계는 상부 모듈의 서로 다른 네 면에 설치되었으며, 강관의 운반, 시공, 해체 전 과정에 걸쳐 경사각과 응력을 모니터링하였다. 실험결과, 경사계로 측정된 경사각은 석션 관입 중 일정하게 유지되었으나 x축 방향으로 더 크게 기울어진 것으로 나타났다. 또한, 서로 다른 면에 설치되어 있어도 같은 축 방향의 경사각은 거의 같게 측정되었다. 변형률계로 측정된 응력은 석션 관입 시 증가하였고, 인발 시 감소하였다. 또한, 측정된 응력으로부터 강관에 편심이 작용하고 있음을 알 수 있었다. 본 연구의 결과는 경사계와 변형률계로 구축된 무선 원격계측 시스템이 대형 원형강관의 안정성 모니터링에 유용하게 활용될 수 있음을 보여준다.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.138-145
• /
• 2017

The problem of non-uniform inflow exists in many practical engineering applications, such as the elbow suction pipe of waterjet pump and, the channel head of steam generator which is directly connect with reactor coolant pump. Generally, pumps are identical designs and are selected based on performance under uniform inflow with the straight pipe, but actually non-uniform suction flow is induced by upstream equipment. In this paper, CFD approach was employed to analyze unsteady hydrodynamic characteristics of reactor coolant pumps with different inflows. The Reynolds-averaged Naiver-Stokes equations with the $k-{\varepsilon}$ turbulence model were solved by the computational fluid dynamics software CFX to conduct the steady and unsteady numerical simulation. The numerical results of the straight pipe and channel head were validated with experimental data for the heads at different flow coefficients. In the nominal flow rate, the head of the pump with the channel head decreases by 1.19% when compared to the straight pipe. The complicated structure of channel head induces the inlet flow non-uniform. The non-uniformity of the inflow induces the difference of vorticity distribution at the outlet of the pump. The variation law of blade to blade velocity at different flow rate and the difference of blade to blade velocity with different inflow are researched. The effects of non-uniform inflow on radial forces are absolutely different from the uniform inflow. For the radial forces at the frequency $f_R$, the corresponding amplitude of channel head are higher than the straight pipe at $1.0{\Phi}_d$ and $1.2{\Phi}_d$ flow rates, and the corresponding amplitude of channel head are lower than the straight pipe at $0.8{\Phi}_d$ flow rates.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.441-448
• /
• 2001

Hot air heater with light oil combustion is used as the most common heater for greenhouse heating in the winter season. However, exhaust gas heat discharged to atmosphere through chimney reaches up to 10~20% of total heat capacity of the oil burred. In order to recover the heat of this exhaust gas and to use for greenhouse heating, the heat pipe type exhaust heat recovery system was manufactured and tested in this experiment. The system consisted of a heat exchanger made of heat pipes, ø15.88${\times}$600mm located in the rectangular box of 675(L)${\times}$425(W)${\times}$370(H)mm, an air suction fan and air ducts. The number of heat pipe was 60, calculated considering the heat exchange amount between exhaust gas and air and heat transfer capacity of a heat pipe. The working fluid of heat pipe was acetone because acetone is known for its excellent heat transfer capacity. The system was attached to the exhaust gas path. According to the performance test it could recover 53,809 to 74,613kJ/h depending on the inlet air temperature of 12 to -12˚at air flow rate of 1.100㎥/h. The temperature of the exhaust gas left the heat exchanger dropped to 100$^{\circ}C$ from 270$^{\circ}C$ after the heat exchange between the suction air and the exhaust gas.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2615-2620
• /
• 2007

This paper describes on pressure drop in a circular pipe of refuse collecting system. The flow characteristics inside the circular pipe are analyzed by three-dimensional Navier-Stokes analysis. In numerical analysis, an organic waste is modeled using the data obtained by site survey. Pressure drop obtained by numerical simulation is compared to the value obtained by experimental measurements for the two kinds of pipe; straight and bended type. The pressure drop obtained by numerical simulation has a good agreement with that of experiments. It is noted that the accurate prediction of pressure drop in the waste pipe is very important to determine the performance of turbo blower used in making a suction pressure in the waste pipe. Especially, the pressure drop for an organic waste is analyzed according to the mass flow rate of waste.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.377-382
• /
• 2001

A suboptimal control law in turbulent pipe flow is derived and tested. Two sensing variables ${\partial}p/{\partial}{\theta}\;|_w\;and\;{\partial}{\upsilon}_{\theta}/{\partial}r\;|_w$ are applied with two actuations ${\phi}_{\theta}$ and ${\phi}_r$. To test the suboptimal control law, direct numerical simulations of turbulent pipe flow at $Re_r=150$ are performed. When the control law is applied, a $13{\sim}23%$ drag reduction is achieved. The most effective drag reduction is made at the pair of ${\partial}{\upsilon}_{\theta}/{\partial}r\;|_w$ and ${\theta}_r$. An impenetrable virtual wall concept is useful for analyzing the near-wall suction and blowing. The virtual wall concept is useful for analyzing the near-wall behavior of the controlled flow. Comparison of the present suboptimal control with that of turbulent channel flow reveals that the curvature effect is insignificant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.495-496
• /
• 2014

The suction method is the substructure installation using the water pressure difference generated by discharging water inside the pile by the pumping operation, after the intrusion by the self-weights of a large hollow steel pipe or a concrete structure. It is known as the low-noise and low-vibration method against the general pile driven method and eco-friendly, also. Most current design and safety assessment of the support structure and considering only the static load, however, the importance of dynamic behavior becomes magnified as the size of wind power generator increases. This study measures the natural frequency of the suction pile prototype about the penetration depth as a part of basic research and analyzed the interaction between the soil and the structure.