• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.129-131
• /
• 2006

KEPCO constructed the first 765kV 2 circuit transmission line in the world with its home grown technologies. Through this 765kV transmission system project, KEPCO accumulated experience and technologies related to the 765 kV power system. Based on the successful completion of the 765kV transmission project, KEPCO is conducting overseas business by using its abundant experience and know-how. In particular, KEPCO developed the training course for power system, called the ATT (Advanced Transmission Technology) training courses for overseas business, especially for developing countries. Therefore, KEPCO developed the "Transmission line design system for overseas projects". This system supports the calculation of wind pressure load, tower design, wire selection, insulation design, etc. by applying the meteorological data of foreign countries and design standards. And this system is applied to the training program so that the trainees can design the optimal transmission line for their own countries.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.268-275
• /
• 2006

Excavation works of cylindrical shafts and tunnels for the construction of a variety of infrastructures have been frequently going on in the urban areas. When ground excavations of cylindrical shafts and shallow tunnels proceed in the ground condition of high water level and silt particle component, ground water drawdown involving soil particle migration causes loosening of ground around tunnels and shafts, causes settlement and deformation of ground. Damages due to ground sinking and differential settlement can occur in the adjacent ground and structures. The extent and possibility of damage relevant to ground water drawdown and soil particle migration can't be so precisely expected in advance that we will face terrible damages in case of minor carefulness. This paper introduces two examples of construction management where using incremental deformation graph of inclinometer, we noticed the possibility of soil migration due to ground water drawdown in the excavation process of vertical shaft and shallow tunnel, analysed a series of measurement data in coupled connection, properly prepared countermeasures, so came into safe and successful completion of excavation work without terrible damages. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• International Journal of Concrete Structures and Materials
• /
• 제10권3호
• /
• pp.337-353
• /
• 2016

The successful completion of the present research would be achieved using ground waste glass (GWG) microparticles in self-consolidating concrete (SCC). Here, the influences of GWG microparticles as cementing material on mechanical and durability response properties of SCC are investigated. The aim of this study is to investigate the hardened mechanical properties, percentage of water absorption, free drying shrinkage, unit weight and Alkali Silica Reaction (ASR) of binary blended concrete with partial replacement of cement by 5, 10, 15, 20, 25 and 30 wt% of GWG microparticles. Besides, slump flow, V-funnel, L-box, J-ring, GTM screen stability, visual stability index (VSI), setting time and air content tests were also performed as workability of fresh concrete indicators. The results show that the workability of fresh concrete was increased by increasing the content of GWG microparticles. The results showed that using GWG microparticles up to maximum replacement of 15 % produces concrete with improved hardened strengths. From the results, when the amount of GWG increased there was a gradual decrease in ASR expansion. Results showed that it is possible to successfully produce SCC with GWG as cementing material in terms of workability, durability and hardened properties.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2598-2604
• /
• 2002

Robots that can move along the narrow and rough tube are very important as the request for the inspection increases. It is necessary for the inspection robots to have a capability to move successfully at even overturned situation and have a simple mechanism to reduce the unexpected failure possibility fer the successful completion of the given mission. Through this paper, the authors propose a novel and simple mechanism using a combination cam device to generate the locomotive motion of multi-legs. This robot uses one DC motor and one combination cam shaft to generate the locomotive motion and can move rough tubes without failure even at the overturned situation. The robot also shows enough fragging force fer the connected line that is very important for a wired inspection robot. Kinematics analysis to design the specification of the robot will be followed and several applications show this robot's potential capabilities.

• 의학교육논단
• /
• 제17권2호
• /
• pp.57-59
• /
• 2015

Student research has been proposed as an educational strategy to fulfill the current requirements in basic medical education (BME) and to compatible with the self-directed development of professionalism. It is commonly accepted that the goals of student research are to develop the competencies of critical, reflective, and self-directed thinking; problem-solving; and creativity; as well as to acquire the skills necessary to search for information and analyze the literature; to cultivate the talent of mastering a specialized field through deeply intensified learning; and to establish close relationships between students and supervisors. To successfully implement student research, authorities on BME should to plan the procedure for the student research projects and allocate personal and material resources adequately in order to provide the opportunity for self-evaluation and reflection through the completion of daily records, to develop the habit of consistently evaluating one's own study, and to maintain a collegial relationship between students and supervisors by offering the proper feedbacks in a timely and consistent manner. In conclusion, despite several obstacles and difficulties in the establishment of successful student research projects, student research could provide students the motivation to develop themselves into expert academic researchers, and play a role in educating students to help solve patients' problems based on scientific evidence in the future.

• 보건교육건강증진학회지
• /
• 제27권4호
• /
• pp.131-139
• /
• 2010

Objectives: This pilot study was designed to examine whether the adolescent smoking cessation program with harmonica therapy was effective or not. It was qualitatively explored perceived smoking consequences, cessation and relapse experience, specific harmonica help to overcome smoking urge, preference of harmonica toward cessation, and harmonica intervention planning to quit. Methods: The treatment program was conducted 30-minute, 6-session, and once a week basis. Qualitative data using Focus Group Interview were collected at the completion of the program with 6 participants, and analyzed by Krueger's systematic process. Results: Participants were smoking daily and consumed 3-10 cigarettes. They recognized undesirable smoking consequences in terms of cost, interpersonal relationship, and health that might lead to cessation attempts in the past. Participants who did not want to quit smoking at the program beginning changed their attitude to quit after exploring partial cessation efforts with the help of harmonica therapy. They believe harmonica's consistent help of quitting and leading to success. Conclusion: Adolescent attitudinal change toward smoking cessation has promising insight of motivation enhancement through harmonica therapy that was a major barrier to successful quit.

• 한국IT서비스학회지
• /
• 제16권2호
• /
• pp.85-96
• /
• 2017

The revised "Software Industry Promotion Law" has been effective from 2013. This law is to be basis of the domestic public information sector and increases the opportunities for small and medium-sized firms in participating the public IT projects. The shortcomings of this law may be the increase of the risk and the decrease of quality of projects. These suggest that the competencies of project manager (PM) s are critical. Also, in general, an SI (System Integration) project is a one that provides a customer with a customer-tailored system for system integration. Particularly, in an SI project involved in a public institution or a large corporation, the ripple effect of success or failure of a project is becoming greater as the system requires higher cost and more time due to high complexity and large scale. One of the solutions to address these problems is to investigate the competencies of a PM. Thus, in this paper, we derived the major competencies using the RGT (Repertory Grid Technique) and categorized the resultant constructs using the content analysis. In addition, we analyzed the level of importance of competencies by applying the AHP (Analytic Hierarchy Process). The conclusion was that Problem-solving Skill and Leadership were the most important competencies of a project manager.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.166-167
• /
• 2016

Unlike the past, supported by the development of digital technologies, free-form buildings are frequently designed with creative thoughts of architectural designers. However, there are some difficulties preventing successfully completion of projects, like reduced productivity and increased construction duration and cost upon the process of producing and installing concrete panels for free-form structures. In particular, there are active studies on the CNC machine for production of free-form concrete panels. Yet, it is difficult to effectively and easily come up with information on production and installation of free-form, curve-surfaced panels which are difficult to be mathematically defined. This requires a lot of manpower and time to implement the curved surfaces of free-form buildings as intended by architects. Accordingly, it needs a model that can effectively create production-installation data of free-form concrete panels for successful free-form building projects. Thus, the purpose of the study is to suggest data estimation model of production-installation using mathematical algorithm in free-form concrete panels. The study results will realize effective production and installation of free-form concrete members, allowing improved productivity of projects, reduced cost and shortened construction duration.

• Journal of Construction Engineering and Project Management
• /
• 제5권1호
• /
• pp.26-31
• /
• 2015

Success of the construction companies is based on the successful completion of projects within the agreed cost and time limits. Artificial neural networks (ANN) have recently attracted much attention because of their ability to solve the qualitative and quantitative problems faced in the construction industry. For the estimation of cost and duration different ANN models were developed. The database consists of data collected from completed projects. The same data is normalised and used as inputs and targets for developing ANN models. The models are trained, tested and validated using MATLAB R2013a Software. The results obtained are the ANN predicted outputs which are compared with the actual data, from which deviation is calculated. For this purpose, two successfully completed highway road projects are considered. The Nftool (Neural network fitting tool) and Nntool (Neural network/ Data Manager) approaches are used in this study. Using Nftool with trainlm as training function and Nntool with trainbr as the training function, both the Projects A and B have been carried out. Statistical analysis is carried out for the developed models. The application of neural networks when forming a preliminary estimate, would reduce the time and cost of data processing. It helps the contractor to take the decision much easier.

• 한국철도학회논문집
• /
• 제10권4호
• /
• pp.393-397
• /
• 2007

During the complex systems development, a great deal of data are generated from both the systems engineering process and project management process, and also some data are required to be prepared for the system engineering management plan (SEMP). For the successful completion of the project, it is necessary to effectively manage all the data in order to maintain data consistency and traceability. To fulfill the necessity, this paper introduces the concept of an integrated data architecture and discusses its realization with $Cradle^{(R)}$(a computer aided systems engineering tool). Also, it was described how to automate the production of the SEMP in that working environment. The result of the approach, managing complex data efficiently in the systems engineering view, has been successfully applied in the Railway Safety Development Program.