• 한국운동역학회지
• /
• 제17권1호
• /
• pp.155-164
• /
• 2007

This study is to find out effective defensive type by analysis on differences among three different defence types of the body lock technique in the ground wrestling. The subjects are 5 athletes who are in 60kg weight class. To get the kinematic analysis seven ProReflex MCU-240(Motion Capture Unit), infrared rays cameras, which was produced by Qualisys, were used to get a two-dimensional coordinate. Following are the analysis result from kinematic factors such as time element, speed element and angular element. 1. During position of ground wrestling, the average necessary time until defender's hip joint touches the mat for Phase1 was $0.34{\pm}0.14sec$ at side position was the shortest space of time out of three types, and Phase2 was $0.21{\pm}0.02sec$ at front position was the shortest space of time out of three types. Moreover, side defence position was the shortest for total average necessary time with $0.78{\pm}0.05sec$. 2. The movement change for hip joint was $57.21{\pm}20.17cm$ for front, $43.35{\pm}7.13cm$ for rear, and $18.67{\pm}10.24cm$ for side at Phase1 and $42.08{\pm}17.56cm$ for side, $16.61{\pm}6.34cm$ for front, and $1.48{\pm}1.29cm$ for rear at Phase2. 3. Movement speed of hip joint at defensive type were most effective in success and fail rate at Phase 1 and its frontal average speed was fastest with $1.01{\pm}0.23m/s$ following by $0.52{\pm}0.15m/s$ for side, and $0.62{\pm}0.15m/s$ for rear. The average for total change of speed is $0.79{\pm}0.32m/s$ for front, $0.78{\pm}0.17m/s$ for side, and $0.49{\pm}0.08m/s$ for rear. 4. The joint angle gets smaller in a order by rear, front, and side for the size of hip joint angle and knee angle for different defensive type. 5. As a result of one-way ANOVA on linear velocity for hip joint in frontal defence(phase1) was significance ($\alpha$=.05), but phase 2 was not significance. Synthetically, analyzing on differences among three different defence types which were front, rear, and side of the body lock technique in the ground wrestling, front defensive type was the most effective. In future, there should be more studies regarding on defence at not a laboratory study but a field study to help out wrestler to pertinent techniques to improve the game of wrestling.

• 대한의용생체공학회:의공학회지
• /
• 제35권3호
• /
• pp.50-54
• /
• 2014

It is being tried to control robot arm using brain signal in the field of brain-machine interface (BMI). This study is focused on applying guidance laws for efficient robot arm control using 3D coordinates obtained from Magnetoencephalography (MEG) signal which represents movement of upper limb. The 3D coordinates obtained from brain signal is inappropriate to be used directly because of the spatial difference between human upper limb and robot arm's end-effector. The spatial difference makes the robot arm to be controlled from a third-person point of view with assist of visual feedback. To resolve this inconvenience, guidance laws which are frequently used for tactical ballistic missile are applied. It could be applied for the users to control robot arm from a first-person point of view which is expected to be more comfortable. The algorithm which enables robot arm to trace MEG signal is provided in this study. The algorithm is simulated and applied to 6-DOF robot arm for verification. The result was satisfactory and demonstrated a possibility in decreasing the training period and increasing the rate of success for certain tasks such as gripping object.

• 아동학회지
• /
• 제2권
• /
• pp.1-16
• /
• 1981

This study had two purposes. First, to examine the stages and developmental order of object permanence based on Piaget's theory. Second, to assess the effects of delay, attentiveness, and direction of gaze. Two experiments were conducted to examine the object permanence development in infants. The subjects for the 2 experiments were randomly drawn from a well-baby clinic. The subjects for Experiment 1 were 72 infants, 12 each in 6 age levels : 6, 9, 12, 15, 18, and 21 months old. Experiment 1 was designed to examine the stages and developmental order of object concept development, ana infants received 5 tasks as follows : (1) finding an object partially hidden under one box (2) finding an object completely hidden under one box (3) finding an object after successive visible displacements (4) finding an object after one invisible displacement (5) finding an object after successive invisible displacements. The subjects for Experiment 2 were 24 9-month-olds. Experiment 2 was designed to assess the effects of delay, attentiveness, and direction of gaze for Stage IV of object concept development. Subjects were equally assigned into one of two delay groups: 0-sec delay and 3-sec delay. Attentiveness was rated in terms of a three-point scale, and then divided into high and low attentive groups. Direction of gaze was judged into two directions. In two experiments, infants received three trials of task, and received a score of 0, 1, 2 for each trials. Data were analyzed by ANOVA, Tukey test, and t-test for task performance, and direction of gaze was analyzed by chi-square. The results obtained from two experiments were as follows : 1. In object permanence test, subjects obtained significantly higher scores with age, and 6, 9, 12, 18 months were classified into different developmental stages. 2. In object permanence development, subjects received significantly different scores with task and a developmental order of tasks was found. First of all, infants mastered finding an object partially hidden under one box, and then mastered finding an object completely hidden under one box. Contrary to Piagetian theory, in this study, the development of finding an object after successive visible displacements and finding an object after one invisible displacement were sometimes reversed. Finally, finding an object after successive invisible displacements was mastered, and the concept of object permanence was completed. 3. In Stage IV of object concept development, a 3-sec delay did not significantly affect the performance of tasks. The O-sec delay group didn't perform significantly better than the 3-sec delay group. 4. In Stage IV of object concept development, attentiveness of infants significantly affected the performance of task. So the highly attentive infants obtained better performance scores than the low attentive infants. 5. In Stage IV of object concept development, direction of gaze significantly affected the performance of task. That is, infants who gazed at the box which contained the object showed a higher rate of success than infants who gazed at the box which had already displaced the object.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권6호
• /
• pp.527-537
• /
• 2007

To evaluate criteria, indications, and prognosis of the various reconstructive methods on the patients with intraoral soft tissue defect who had been treated at Dept. of Oral and Maxillofacial Surgery, Pusan National University Hospital from 2003 to 2005, we have reviewed the clinical data of the patients and analysed. The results were as follows: 1. Tongue flaps have been mainly applied on anterior portion of palate and maxilla. The survival rate was high percent, but the cooperation of patient was inevitable for the success. 2. Palatal mucosa rotational flaps were available on relative large defect on palate, oroantral fistula site. The side effect was a scaring band from secondary healing on denuded donor palate site. Sometimes the band came to be a hinderance to swallowing, phonation. 3. Forearm free flap was a workhorse flap for everywhere in intraoral defects. We had used the flap on cheek, floor of mouth, tongue without any significant complications. But the application of the flap was required for long operation time, which was disadvantageous to the old, weak patients. 4. Cervical platysmal flap could be easily applicable for buccal cheek, floor of mouth after excision of the cancer lesion. The design of the flap could be made simultaneously on neck dissection, but the danger of cancer remnants on the flap always might be remained. 5. Buccal fat pad pedicled flap must have been a primary flap for repair of oroantral fistula especially on posterior maxilla. The flap survival will be expected if the considerations for above reconstructive methods on site, size, condition of defects primarily could be made.

• Journal of Periodontal and Implant Science
• /
• 제31권3호
• /
• pp.581-595
• /
• 2001

In performing implant procedures in the anterior portion of the maxilla, many difficulties exist because of anatomical reasons, such as the proximity of the nasal floor, lateral extension of the incisive canal, and labial concavity. On the other hand, in the posterior region of the maxilla, there is often insufficient recipient bone between the maxillary sinus and alveolar ridge due to alveolar ridge resorption and pneumatization of the maxillary sinus. In order to perform implants in such regions, ridge augmentation procedures such as onlay bone graft, guided bone regeneration, and maxillary sinus grafting are performed. In studies of Caucasians, use of autograft from mandibular symphysis has been reported to be highly successful in maxillary sinus grafting. However, in a clinical study of Koreans, autograft of mandibular symphysis has been reported to have significantly low success rate. It has been hypothesized that this is because of insufficient cancellous bone due to thick cortical bone. In order to test this hypothesis, bone quality and morphology of Koreans can be compared with those of Caucasians. In this study, the bone density and morphology of the cortical bone and cancellous bone in the mandibular symphysis of 35 Korean cadavers were evaluated. The following results were obtained: 1. In terms of bone density, type I, type II, and type III consisted of 1.4%(3/213), 72.3%(154/213), and 26.3%(56/213) of the cross-sectioned specimens, respectively. In general, the bone density tended to change from type II to type III, as cross-sectioned specimens were evaluated from the midline to the canine. Type IV wasn't observed in this study. 2. The distance between the root apex and the lower border of the cancellous bone was 18.34mm-20.59mm. Considering that the bone has to be cut 5mm below the root apex during the procedure, autografts with about 15mm of vertical thickness can be obtained. 3. The thickness of cortical bone on the labial side increased from the root apex to the lower border of the mandible. The average values ranged from 1.43mm to 2.36mm. 4. The labio-lingual thickness of cancellous bone ranged from 3.43mm to 6.51mm. The thickness tended to increase from the apex to the lower border of the mandible and decrease around the lower border of cancellous bone. From the above results, the anatomic factors of the mandibular symphysis (bone density, thickness, quantity and length of the cortical bone and cancellous bone) didn't show any difference from Caucasians, and it cannot be viewed as the cause of failure in autografts in the maxillary sinus for implants.

• The Journal of Advanced Prosthodontics
• /
• 제1권2호
• /
• pp.85-90
• /
• 2009

STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).

• 대한치과의사협회지
• /
• 제53권7호
• /
• pp.485-499
• /
• 2015

Purpose: Delayed intentional replantation was introduced as a new alternative to treat the teeth with severe periodontal involvement. The purpose of this study was to elucidate the possibility of delayed intentional replantation and establish theoretical backgrounds. Materials and Methods: Studies were performed into the following two subjects; (1)Clinical evaluation of patients who underwent delayed intentional replantation using clinical and radiographic data. Severe periodontitis involved teeth were carefully extracted and proper time for delayed replantation was evaluated by analyzing inflammation markers (IL-6, TNF-${\alpha}$). (2) Theoretical studies for efficacy of delayed intentional replantation using (-)-Epigallocatechin-3-gallate (EGCG) for preservation of periodontal ligament cells on root surface by minimizing inflammation and treatment of inflammatory extraction sockets. Results: Meaningful success ratio and survival rate were found in delayed intentional replantation showing reduced bone loss and maintained bone level. Additionally, viability of EGCG applied periodontal ligament cells was much higher than control group. Also, EGCG promoted healing of inflammatory extraction sockets by inhibiting inflammatory cell proliferation. Conclusion: Within the limitations of this study, 1-2 weeks after extraction is an appropriate time to do delayed intentional replantation. Also, EGCG provides helpful effects on viability of periodontal ligament cells and periodontium.

• Tuberculosis and Respiratory Diseases
• /
• 제83권3호
• /
• pp.218-227
• /
• 2020

Background: The national Public-Private Mix (PPM) tuberculosis (TB) control project provides for the comprehensive management of TB patients at private hospitals in South Korea. Surveillance and monitoring of TB under the PPM project are essential toward achieving TB elimination goals. Methods: TB is a nationally notifiable disease in South Korea and is monitored using the surveillance system. The Korea Centers for Disease Control and Prevention quarterly generates monitoring indicators for TB management, used to evaluate activities of the PPM hospitals by the central steering committee of the national PPM TB control project. Based on the notification date, TB patients at PPM hospitals were enrolled in each quarter, forming a cohort, and followed up for at least 12 months to identify treatment outcomes. This report analyzed the dataset of cohorts the first quarter of 2016 through the fourth quarter of 2017. Results: The coverage of sputum, smear, and culture tests among the pulmonary TB cases were 92.8% and 91.5%, respectively. The percentage of positive sputum smear and culture test results were 30.7% and 61.5%, respectively. The coverage of drug susceptibility tests among the culture-confirmed cases was 92.8%. The treatment success rate among the smear-positive drug-susceptible cases was 83.2%. The coverage of latent TB infection treatment among the childhood TB contacts was significantly higher than that among the adult contacts (85.6% vs. 56.0%, p=0.001). Conclusion: This is the first official report to analyze monitoring indicators, describing the current status of the national PPM TB control project. To sustain its effect, strengthening the monitoring and evaluation systems is essential.

• 한국병원경영학회지
• /
• 제21권4호
• /
• pp.1-12
• /
• 2016

The purpose of this study are suggest to performance measurement model of Electronic Medical Record(EMR) and Key Performance Index(KPI). For data collection, 665 questionnaires were distributed to medical record administrators and insurance reviewers at 31 hospitals, and 580 questionnaires were collected(collection rate: 87.2%). Regarding methodology, Critical Success Factor(CSF) and index of the information system were derived based on previous studies, and these were set as performance measurement factors of EMR system. The performance measurement factors were constructed by perspective using BSC, and analysis on causal relationship between factors was conducted. A model of causal relationship was established, and performance measurement model of EMR system was proposed through model validation. Analysis on causal relationship between performance management factors revealed that utility cognition of the learning & growth perspective factor had causal relationship with job efficiency(${\beta}=0.20$) and decision support(${\beta}=0.66$) of the internal process perspective factors, and security had causal relationship with system satisfaction(${\beta}=0.31$) of the customer perspective factor. System quality had causal relationship with job efficiency(${\beta}=0.66$) and decision support(${\beta}=0.76$) of the internal process perspective factors, all of which were statistically significant(P<0.01). Job efficiency of the internal process perspective had causal relationship with system satisfaction(${\beta}=0.43$), and decision support had causal relationship with decision support satisfaction(${\beta}=0.91$) and job satisfaction (${\beta}=0.74$), all of which were statistically significant(P<0.01). System satisfaction of the customer perspective had causal relationship with job satisfaction(${\beta}=0.12$), job satisfaction had causal relationship with cost reduction(${\beta}=0.53$) of the financial perspective, and decision support satisfaction had causal relationship with productivity improvement(${\beta}=0.40$)of the financial perspective(P<0.01). Also, cost reduction of the financial perspective had causal relationship with productivity improvement(${\beta}=0.37$), all which were statistically significant(P<0.05). Suitability index verification of the performance measurement model whose causal relationship was found to be statistically significant revealed that $X^2/df=2.875$, RMR=0.036, GFI=0.831, AGFI=0.810, CFI=0.887, NFI=0.838, IFI=0.888, RMSEA=0.057, PNFI=0.781, and PCFI=0.827, all of which were in suitable levels. In conclusion, the performance measurement indices of EMR system include utility cognition, security, and system quality of the learning & growth perspective, decision support and job efficiency of the internal process perspective, system satisfaction, decision support satisfaction, and job satisfaction of the customer perspective, and productivity improvement and cost reduction of the financial perspective. In this study, it is expected that the performance measurement indices and model of EMR system which are suggested by the author, will be a measurement tool available for system performance measurement of EMR system in medical institutions.

• Spatial Information Research
• /
• 제12권2호
• /
• pp.151-163
• /
• 2004

연구는 KOSDIC(Korea Standard of Drawing Information in Construction)과 GIS데이터의 효율적인 연계를 위한 도면 교환 포맷 표준개발에 관한 것으로 CAD도면을 매개로 한 KOSDIC과 GIS데이터의 연계 방안에 관한 것이다 제1차 NGIS사업의 일환으로 전국 수치지도가 CAD데이터로 구축되었고, 개발된 수치지도를 이용하여 지자체를 중심으로 GIS사업이 활발히 추진되면서, UIS, LIS, EIS, AM/FM 등 각종 분야와 지리정보 시스템(geographic information science)이 연계되고 있다. 이러한 추세에서 지리정보시스템은 공간정보를 기반으로 여러분야에 걸쳐 활발히 구축되고 있으며, 여러 시스템들과의 연계에서 데이터 교환의 표준화가 중요하게 부각되고 있다. 그러나 GIS의 수치지도는 CAD도면의 지형도로 만들어져 있어 GIS포맷으로 변환(DWG→DXF→SHP)하여 공간자료로 활용될때 변환과정에서 오류나 문제점이 많이 발생하여 변환 성공률이 높지 못한 문제점을 가지고 있다. 또한, 객체기반으로 생성되는 CAD도면의 사상들은 Point와 Line feature로 이루어져 있기 때문에 Point, Line, Polygon feature를 요소로 하는 GIS시스템에서 Polygon feature의 변환이 불가능하여 데이터의 통합과 표준화에 가장 큰 장애로 대두되고 있다. 따라서, 본 연구에서는 CAD도면을 GIS포맷으로 변환시킬때 발생하는 문제점을 해소하기 위한 방안을 모색해보고자 한다. 이는 향후 KOSDIC과 GIS간의 효율적인 데이터 연계방안 뿐만 아니라 여러 데이터간의 표준화 연구에 많은 도움이 될 것이다.