• 제목/요약/키워드: Success Rates

검색결과 565건 처리시간 0.028초

하악에 식립된 Xive implant 환자의 분포 및 식립부 유형과 생존율 (The distribution of Xive implant patients and the type of implant site and survival rate in mandible)

  • 장인권;정의원;김창성;심준성;조규성;채중규;김종관;최성호
    • Journal of Periodontal and Implant Science
    • /
    • 제35권2호
    • /
    • pp.437-448
    • /
    • 2005
  • This study is an analysis of distribution of patients who installed Xive implant in Yonsei University Hospital and types of implant site for about 2 years recall check and cumulative survival rate. 41 implant were used in this study. It shows the conclusion below. 1. Patients at the age of 40s and 50s were 60% of all implant cases and average number of implant was 2.4(man), and 1.9(woman). All cases were operated on mandible, 3 implants on anterior region and 38 implants on posterior region. 2. The major cause of tooth loss is dental caries(48.8%), followed by periodontal disease. 3. Most distribution of bone qaulity for mandibular implant site was type II(65.8%) and bone quantity was type B(75.6%). 4. The majority of implants were those of 11, 13mm in length(95%) and regular diameter in width (64%). 5. The 41(19 persons) Xive implants that were placed in the mandibular anterior and posterior region were all survival and showed a 100% 2 year cumulative survival rate. The results provided us with basic data on patient type, implant distribution, bone condition, and survival rate. We wish that our results coupled with other research data helps assist in the further study for better implant success rates, etc.

역도 인상동작 성공 시 최대 바벨무게 예측 (The Forecasting a Maximum Barbell Weight of Snatch Technique in Weightlifting)

  • 하종규;류지선
    • 한국운동역학회지
    • /
    • 제15권3호
    • /
    • pp.143-152
    • /
    • 2005
  • The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

정맥 내 980-nm 다이오드 레이저를 이용한 대복재정맥 역류의 치료 (Endovenous 980-nm Diode Laser Treatment of Incompetent Great Saphenous Vein)

  • 김건일;조태준;이재웅;홍기우;이원용
    • Journal of Chest Surgery
    • /
    • 제40권2호
    • /
    • pp.97-102
    • /
    • 2007
  • 배경 : 최근 하지 정맥류 치료에 정맥 내 레이저 치료가 도입되어 비침습적이면서도 좋은 치료 결과들이 많이 보고되고 있다. 저자들은 대복재정맥 역류로 인한 하지 정맥류 환자에서 980-nm 다이오드레이저를 이용하여 대복재정맥 폐쇄술을 시행하였으며 그 치료 효과를 분석하였다. 대상 및 방법: 2003년 9월부터 2006년 2월까지 대복재정맥 역류로 인한 하지 정맥류 환자 238명(332예)을 대상으로 980-nm 다이오드 레이저를 이용하여 정맥 내 레이저 치료를 시행하였다. 수술은 레이저 치료와 동시에 보행적 정맥류 제거술을 시행하였다. 수술 전 임상 양상과 수술 합병증, 그리고 수술 후 1개월과 3개월의 추적 듀플렉스 초음파 검사 결과를 분석하였다. 결과 : 수술 후 합병증으로는 대부분의 환자에서 반상 출혈이 발생하였고, 감각 이상이 68예(20.5%), 피부화상이 3예(0.9%) 발생하였다. 추적 초음파 검사에서 수술 1개월 후 26예, 3개월 후에는 10예에서 추가로 대복재 정맥 역류 혹은 부분 혈류재개가 확인되어 치료성공률은 각각 91.3%, 87.9%였다. 결론: 레이저를 이용한 대복재정맥 폐쇄술이 기존의 대복재정맥 발거술에 비하여 비침습적이기는 하지만 저자들은 다소 높은 대복재정맥의 재개통을 경험하였다. 이는 적절치 않은 레이저 강도나 적용 시간(속도), 과도하게 확장된 대복재정맥 등이 원인일 것으로 생각되며 시술 후 정맥의 재개통을 줄이기 위한 많은 연구 노력과 함께 초음파 검사를 통한 정확한 추적 관찰이 필요할 것으로 생각한다.

Radial Probe Endobronchial Ultrasound Using Guide Sheath-Guided Transbronchial Lung Biopsy in Peripheral Pulmonary Lesions without Fluoroscopy

  • Hong, Kyung Soo;Ahn, Heeyun;Lee, Kwan Ho;Chung, Jin Hong;Shin, Kyeong-Cheol;Jin, Hyun Jung;Jang, Jong Geol;Lee, Seok Soo;Jang, Min Hye;Ahn, June Hong
    • Tuberculosis and Respiratory Diseases
    • /
    • 제84권4호
    • /
    • pp.282-290
    • /
    • 2021
  • Background: Radial probe endobronchial ultrasound-guided transbronchial lung biopsy (RP-EBUS-TBLB) has improved the diagnostic yield of bronchoscopic biopsy of peripheral pulmonary lesions (PPLs). The diagnostic yield and complications of RP-EBUS-TBLB for PPLs vary depending on the technique, such as using a guide sheath (GS) or fluoroscopy. In this study, we investigated the utility of RP-EBUS-TBLB using a GS without fluoroscopy for diagnosing PPLs. Methods: We retrospectively reviewed data from 607 patients who underwent RP-EBUS of PPLs from January 2019 to July 2020. TBLB was performed using RP-EBUS with a GS without fluoroscopy. The diagnostic yield and complications were assessed. Multivariable logistic regression analyses were used to identify factors affecting the diagnostic yields. Results: The overall diagnostic accuracy was 76.1% (462/607). In multivariable analyses, the size of the lesion (≥20 mm; odds ratio [OR], 2.06; 95% confidence interval [CI], 1.27-3.33; p=0.003), positive bronchus sign in chest computed tomography (OR, 2.30; 95% CI, 1.40-3.78; p=0.001), a solid lesion (OR, 2.40; 95% CI, 1.31-4.41; p=0.005), and an EBUS image with the probe within the lesion (OR, 6.98; 95% CI, 4.38-11.12; p<0.001) were associated with diagnostic success. Pneumothorax occurred in 2.0% (12/607) of cases and chest tube insertion was required in 0.5% (3/607) of patients. Conclusion: RP-EBUS-TBLB using a GS without fluoroscopy is a highly accurate diagnostic method in diagnosing PPLs that does not involve radiation exposure and has acceptable complication rates.

A Computed Tomography Analysis of the Success of Spinal Fusion Using Ultra-Low Dose (0.7 mg per Facet) of Recombinant Human Bone Morphogenetic Protein 2 in Multilevel Adult Degenerative Spinal Deformity Surgery

  • Liu, Gabriel;Tan, Jun Hao;Yang, Changwei;Ruiz, John;Wong, Hee-Kit
    • Asian Spine Journal
    • /
    • 제12권6호
    • /
    • pp.1010-1016
    • /
    • 2018
  • Study Design: Retrospective cohort study. Purpose: To report on spinal fusion assessment using computed tomography (CT) after adult spinal deformity (ASD) surgery using ultra-low dose recombinant human bone morphogenetic protein 2 (RhBMP-2). Overview of Literature: The reported dose of RhBMP-2 needed for successful spinal posterolateral fusion in ASD ranges from 10 to 20 mg per spinal level. This study reports the use of ultra-low dose of RhBMP-2 (0.07 mg per facet) to achieve spinal fusion in multilevel ASD surgery. Methods: Consecutive patients who underwent ASD surgery using ultra-low dose RhBMP-2 were recruited. Routine postoperative CT analysis for spinal fusion was performed by two spine surgeons. Inter-observer agreement was calculated for facet fusion (FF) and interbody fusion (IBF) at 6 and 12 months after the procedure. Results: Six consecutive ASD patients with a mean age of 62 years (28-72 years) were examined. Each patient received a total dose of 12 mg with an average dose of $0.69{\pm}0.2mg$ (0.42-1 mg) per single FF and $1.38{\pm}0.44mg$ (0.85-2 mg) for IBF. Total 131 FF and 15 IBF were examined in the study, with 88 FFs and nine IBFs being analyzed specifically at 6 months after the surgery. FF and IBF reported by surgeons A and B at 6 months were 97.7% vs. 91.9% FF, respectively (${\kappa}=0.95$) and 100% vs. 100% IBF, respectively (${\kappa}=1$). Two patients underwent longitudinal follow-up CT at 12 months, and the FF rates reported by surgeons A and B were 100% vs. 95.8%, respectively (${\kappa}=0.96$). Five out of nine facet (56%) non-unions were identified at the cross-links. The remaining four facet pseudarthrosis were noted at 1-2 spinal levels caudal to the cross-links. At the final clinical follow-up, there was no rod breakage, deformity progression, neurological deficit, or symptom recurrence. The Oswestry Disability Index improved by an average of $32.8{\pm}6.3$, while the mental component summary of the 36-item Short-Form Health Survey improved by an average of $4.7{\pm}2.1$, and physical component summary improved by an average of $10.5{\pm}2.1$. Conclusions: To our knowledge, this is the first study to report a CT that defined 92%-98% FF and 100% IBF using the lowest reported dose of RhBMP-2 in multilevel ASD surgery. The use of ultra-low dose RhBMP-2 reduces the RhBMP-2 related complications and healthcare costs.

교토의정서의 온실가스 감축 변화로 본 레짐효과 분석 (An Empirical Analysis on the Effects of Kyoto Protocol on the Greenhouse Gas Emissions)

  • 김영신;전준항;백희정
    • 한국기후변화학회지
    • /
    • 제1권1호
    • /
    • pp.1-11
    • /
    • 2010
  • 본 연구는 1997년에 채택한 교토의정서의 정책효과를 1990~2005년간 통계자료에 근거하여 분석하였다. 지구촌 국가를 2개 그룹으로 분류한 비교에서 OECD 국가 및 경제이행국가를 중심으로 하는 1차 감축의무 대상국가와 중국, 인도를 비롯한 대부분 개발도상국으로 구성된 1차 감축의무 비대상국가의 이산화탄소 배출 증가율은 교토의정서상 기준 시점인 1990년에 비하여 2005년에 각각 -10.2%, 88.1%를 보였다. 전지구촌의 증가율이 29.1%인 것을 감안한다면 이러한 차이는 실질적으로 매우 큰 차이이며, 통계적으로도 의미 있는 차이가 있는 것으로 나타났다. 한편, 배출량의 변화를 정책 개입시점인 교토의정서 채택 및 IPCC 2차 보고서 반영시기(1997년), 교토의정서 감축목표 합의 및 IPCC 3차 보고서 반영시기, 그리고 미국의 교토의정서 탈퇴시기(2001년)를 기준으로 비교분석에서는 기후변화 과학적 증거에 대한 확신에 따른 증가보다는 오히려 미국의 교토의정서 불참 선언으로 나타났다. 포스트 교토의정서가 국제기후변화레짐으로써 실효성을 가지기 위해서는 미국은 물론 1차 감축의무 비대상국가의 포스트 교토의정서 체제 수용이 매우 시급한 것으로 판단된다.

마디배양과 다양한 호르몬을 이용한 효율적인 알스트로메리아 캘러스 유도 시스템 체계 확립 (Establishment of efficient Alstromeria callus induction system using node culture and various hormones)

  • 양환래;이상희;김종보
    • 문화기술의 융합
    • /
    • 제5권1호
    • /
    • pp.413-416
    • /
    • 2019
  • 알스트로메리아는 절화 국제 시장에서 가장 중요한 작물 중 하나이다. 특히 긴 개화기간, 다양한 꽃 색깔, 그리고 저온적응성이 높고 배양기간 동안 낮은 에너지를 필요로 한다. 알스트로메리아는 낮은 증식률, 긴 시간이 걸리는 배양 과정, 높은 바이러스 감염율 때문에 기내 배양 기술이 오늘날까지 계속해서 발전해왔다. 캘러스 유도는 직접적인 식물체 발생 방법에 비해 다양한 배양 부위를 가지고 있고 캘러스만 유지를 잘한다면 캘러스를 유지하면서 식물체 분화를 동시에 할 수 있어 대량 증식에 많은 이용이 가능하다. 본 연구에서는 효율적인 캘러스 유도를 위한 다양한 호르몬과 품종을 비교하여 실험을 진행하였다. 마디 및 마디사이를 배양하여 실험을 진행한 결과, 8주 후부터 캘러스가 발생하기 시작하였고, 마디사이에 비해 마디에서의 캘러스 발생율이 높게 측정되었다. 또한 2,4-D와 picloram을 비교한 실험에서는 2,4-D를 처리한 배지에서 캘러스 발생율이 최대 2배 이상 높게 측정되었다. 이러한 결과를 이용하여 알스트로메리아 대량증식 시스템 체계 확립 및 신품종 육성에 도움을 줄 것이라 생각되어진다.

Effect of oocyte chromatin status in porcine follicles on the embryo development in vitro

  • Lee, Joo Bin;Lee, Min Gu;Lin, Tao;Shin, Hyeon Yeong;Lee, Jae Eun;Kang, Jung Won;Jin, Dong-Il
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권7호
    • /
    • pp.956-965
    • /
    • 2019
  • Objective: The main goal of this study was to provide a morphological indicator that could be used to select high-quality oocytes of appropriate meiotic and developmental capabilities in pig. The higher quality of immature oocytes, the higher success rates of in vitro maturation (IVM) and in vitro fertilization (IVF). Thus, prior to the IVM culture, it is important to characterize oocytes morphologically and biochemically in order to assess their quality. Two of the largest indicators of oocyte quality are the presence of cumulus cells and status of chromatin. To investigate the effects of porcine oocyte chromatin configurations on the developmental capacity of blastocysts, we assessed oocyte chromatin status according to follicle size and measured the developmental potency of blastocysts. Methods: To sort by follicle size, we divided the oocytes into three groups (less than 1 mm, 1 to 3 mm, and more than 3 mm in diameter). To assess chromatin configuration, the oocytes were assessed for their stages (surrounded nucleolus [SN] germinal vesicle [GV], non-surrounded nucleolus [NSN] GV, GV breakdown, metaphase I [MI], pro-metaphase II [proMII], and metaphase II [MII]) at different maturation times (22, 44, and 66 h). To assess the development rate, oocytes of each follicle size were subjected to parthenogenetic activation for further development. Finally, GV oocytes were grouped by their chromatin configuration (SN, SN/NSN, and NSN) and their global transcriptional levels were measured. Results: SN GV oocytes were more suitable for IVF than NSN GV oocytes. Moreover, oocytes collected from the larger follicles had a greater distribution of SN GV oocytes and a higher developmental capacity during IVM, reaching MII more quickly and developing more often to blastocysts. Conclusion: Porcine oocytes with high-level meiotic and developmental capacity were identified by analyzing the relationship between follicle size and chromatin configuration. The porcine oocytes from large follicles had a significantly higher SN status in which the transcription level was low and could be better in the degree of meiotic progression and developmental capacity.

메이커스(Makers)를 위한 크라우드 펀딩 디자인 진단 가이드라인에 관한 연구 (A Study on the Design Diagnostic Guideline in Crowdfunding for Makers)

  • 오인균;이장우
    • 한국과학예술포럼
    • /
    • 제35권
    • /
    • pp.281-292
    • /
    • 2018
  • 크라우드 펀딩은 소셜 펀딩으로도 불리며, 예비 창업자, 메이커스들이 사업자금과 생산자금을 모을 수 있는 창구이다. 최근에 와서 크라우드 펀딩은 높은 성장률을 기록하고 있으며, 정부에서도 각종 관련 지원 정책을 내놓고 있다. 본 연구는 이와 같은 시대적 상황을 배경으로 제품 디자인 중심의 메이커스들을 대상으로 크라우드 펀딩 디자인 진단 가이드라인을 도출하는 것을 그 목적으로 하며, 이를 위해서 문헌 조사 방법, 전문가 인터뷰 방법과 같은 복합적 연구방법을 적용하였다. 문헌조사는 관련 뉴스와 선행연구를 중심으로 조사하였으며, 인터뷰의 경우 관련 전문가 10명을 대상으로 1차와 2차로 나누어서 진행하였다. 문헌 조사 결과 크라우드 펀딩에서 사용 중인 진단 가이드라인에는 디자인과 관련된 내용이 부족하고 세부적이지 못했다. 그 결과 디자인 카피와 제품 사기 문제가 있는 것으로 조사되었다. 그리고 선행연구를 통해서 펀딩 성공을 위해서는 정보전달 글과 이미지가 중요한 요소임을 알게 되었다. 전문가 인터뷰의 경우 1차 인터뷰에서 7명의 전문가가 참여하였으며, 2단계 프로세스의 9개 진단 주제의 가이드라인 초안을 도출하였다. 이후 2차 인터뷰에서는 3명의 진단 경험을 가진 전문가가 참여하여 가이드라인 초안에 대한 검증과 보완과정을 거쳐서 3단계 프로세스의 8개 진단 주제의 최종 크라우드 펀딩 디자인 진단 가이드라인을 만들었다. 본 연구결과는 메이커들 외에 관리자들도 활용할 수 있도록 하였으며, 이를 통해 문제점을 사전에 예방하고 건전한 메이커스 크라우드 펀딩 생태계 조성에 도움이 되기를 기대한다.

선박관리산업 전문인력 이직 원인 분석 및 대책 연구 (A Study on the Analysis of Reasons for Job Change and Countermeasures among Professionals in the Ship Management Industry)

  • 박태용;하도연;김율성
    • 한국항해항만학회지
    • /
    • 제48권3호
    • /
    • pp.146-154
    • /
    • 2024
  • 대한민국 선박관리산업은 지속적으로 발전하고 있으며 이에 정부에서는 선박관리산업 환경 변화에 대응하기 위해 선박관리산업 발전을 위한 정책을 추진함으로써 대한민국 선박관리산업 경쟁력을 높이기 위해 다양한 정책을 추진하고 있다. 또한 선박 관리산업의 경쟁력을 좌우하는 중요한 요소로서 우수한 선박관리 전문인력의 필요성을 제시하였고 선박관리 전문인력 양성 계획 및 관련 정책을 추진하였다. 하지만 이러한 정부 및 유관기관의 노력에도 불구하고 현재 선박관리기업들은 심각한 인력난을 겪고 있다. 선박관리산업의 경쟁력을 높이기 위해 우수한 선박관리 전문인력을 확보하는 것이 필수적이다. 이에 본 연구에서는 선박관리 전문인력의 이직 원인을 알아보고자 하였다. 연구결과 선박관리 전문인력 이직 원인의 경우 업무환경, 경제적 보상 및 복리후생, 자기개발, 승진 및 커리어 4가지 요인으로 분류되었다. 이후 도출된 요인을 바탕으로 다중회귀 분석을 실시하였다. 분석 결과 경제적 보상 및 복리후생 요인의 비표준화계수 0.426으로 선박관리 전문인력의 이직률 감소에 영향을 미치는 것으로 도출되었다. 본 연구는 향후 선박관리산업의 안정적인 인적자원 관리 정책을 구축함에 기초자료로 활용될 수 있다는 점에서 의의가 있다.