• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.386-389
• /
• 2007

The dielectric properties of $(Ba_{0.5}Sr_{0.5})TiO_3$ ferroelectric thin films have been investigated according to the substrates in order to optimize the their properties. MgO, r-plane sapphire, and poly-crystalline sapphire (Alumina) substrates have been used to deposite $(Ba_{0.5}Sr_{0.5})TiO_3$ ferroelectric thin films by RF magnetron sputtering. The BST thin films deposited on the single crystal (100)MgO substrates have high tunability and low dielectric loss. These results are caused by a low misfit between the lattice parameters of the BST films and the substrate. The BST films deposited on r-plane sapphire have relatively high misfit, and the tunability of 17% and dielectric loss of 0.0007. To improve the dielectric properties of the BST films, the post-annealing methods has been introduced. The BST films deposited on (100)MgO, (1102)r-plane sapphire, and poly-crystalline sapphire substrates have best properties in post-annealing conditions of $1050^{\circ}C$, $1100^{\circ}C$, and $1150^{\circ}C$, respectively. The different optimal post-annealing conditions have been found according to the different misfits between the films and substrates, and thermal expansion coefficients. Moreover, the films deposited on alumina substrate which is relatively cheap have a good tunability properties of 23% by the post-annealing.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.99.2-99.2
• /
• 2011

Transparent conducting oxides (TCOs) supported on glass are widely used as substrates in PEC studies for photovoltaic hydrogen generation applications However, high sheet resistane ($10{\sim}15{\Omega}/cm^2$) and fragileness of glass-supported TCO substrates are the obstacles to produce the large area PEC cells. Such internal sheet resistance is detrimental to efficient collection of photogenerated majority charge carriers at the photoactive material and electrolyte interface. Moreover, these TCO substrates are very expensive and consume about 40~60% cost of the devices. Hence, a low sheet resistance of the substrate is a key point in improving the performance of PEC devices. Metallic substrates coated with a photoactive material would be a good choice for efficient charge collection. Such metal substrates based photanodes are best candidate for large-scale phtoelectrochemical water splitting for hydrogen generation. In this study, we report the enhanced PEC performance of $WO_3$ film on metal(chemical etched, bare) substrate. It is proposed that interface between $WO_3$ and the metal substrate is responsible for efficient charge transfer and demonstrated significant improvement in the photoelectrochmical performance. X-ray diffration and FESEM suduies reveled that $WO_3$ films are monoclinic, porous, polycrystalline with average grain size of ~50nm. Photocurrent of $WO_3$ prepared on metal substrates was measured in 0.5M $H_2SO_4$ electroyte under simulated $100mW/cm^2$ illumination.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.6-10
• /
• 2002

Al films (1000~4000${\AA}$)were deposited on glass and polymer(polyethersulfine) plastic substrates by DC-magnetron sputtering for plastic-based flat-panel displays. A stepped heating process was used both to improve the electrical characteristics and to diminish the thermal expansion of the polymer substrates. Following this procedure, we could succeed in sputtering Al films without any cracking or shrinkage of the polymer substrates. The treatment temperatures and deposited process of Al films were under 200$^{\circ}C$. Also, this low temperature fabrication process allows the application of plastic substrates. Scanning Electrom Microscopy, Atomic Force Microscopy, X-ray Dffractometry, and electrical measurements such as resistivity measurements were performed to investigate the properties of deposited the Al films and their reliability. 

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.83-95
• /
• 1997

The degradation mode of lignocellulose by anaerobic ruminal cellulolytic bacterium Ruminococcus albus F-40 was investigated. Birchwood holocellulose and filter paper were incubated as the sole carbohydrate sources with using the Hungate techniques. After 2 or 4 days of incubation, samples were employed for chemical and electron microscopic evaluations. The degradation rate of cellulosic substrates and the adhesion rate of bacteria to the substrates increased proportionally with the decrease of relative crystallinity of cellulose, indicating the preferential breakdown of amorphous cellulose, by this bacterium. X-ray diffraction analyses and polarized light microscopy showed, however, that crystalline cellulose was also degraded by R. albus. FT-IR spectra indicated that not only cellulose but hemicellulose was also degraded by this bacterium. Electron microscopic investigations showed the protuberant structures on the surface of R. albus. These structures were much more significant when bacterial cells were grown in the media containing insoluble substrates, such as cellulose, indicating clearly that bacterial protuberant structures were induced by the substrates. Protuberant structures extended from the bacterial cells adhered tightly to the substrates and numerous vesicles covered the surface of cellulosic substrates affected. Cellulosome-like structures were distributed on the cellulose matrix. Electron microscopic works showed that diverse surface organells of R. albus were involved in the degradation of cellulosic materials. SEM examinations showed the breakdown of cellulose by R. albus was proceeded by severeal routes : short fiber formation, defibrillation and destrafication of cellulose microfibril.

• Korean Journal of Materials Research
• /
• v.19 no.1
• /
• pp.18-23
• /
• 2009

The influence of various surface morphologies on the mechanical strength of silicon substrates was investigated in this study. The yield for the solar cell industry is mainly related to the fracturing of silicon wafers during the manufacturing process. The flexural strengths of silicon substrates were influenced by the density of the pyramids as well as by the size and the rounded surface of the pyramids. To characterize and optimize the relevant texturing process in terms of mechanical stability and the fabrication yield, the mechanical properties of textured silicon substrates were investigated to optimize the size and morphology of random pyramids. Several types of silicon substrates were studied, including the planar type, a textured surface with large and small pyramids, and a textured surface with rounded pyramids. The surface morphology and a cross-section of the as-textured and fractured silicon substrates were investigated by scanning electron microscopy.

• Korean Journal of Materials Research
• /
• v.32 no.12
• /
• pp.515-521
• /
• 2022

Various types of optical materials and devices used in special environments must satisfy durability and optical properties. In order to improve the durability of zinc sulfide multispectral (MS ZnS) substrates with transmission wavelengths from visible to infrared, Ge-Sb-Se-based chalcogenide glass was used as a sealing material to bond the MS ZnS substrates. Wetting tests of the Ge-Sb-Se-based chalcogenide glass were conducted to analyze flowability as a function of temperature, by considering the glass transition temperature (T_g) and softening temperature (T_s). In the wetting test, the viscous flow of the chalcogenide glass sample was analyzed according to the temperature. After placing the chalcogenide glass disk between MS ZnS substrates (20 × 30 mm), the sealing test was performed at a temperature of 485 ℃ for 60 min. Notably, it was found that the Ge-Sb-Se-based chalcogenide glass sealed the MS ZnS substrates well. After the MS ZnS substrates were sealed with chalcogenide glass, they showed a transmission of 55 % over 3~12 ㎛. The tensile strength of the sealed MS ZnS substrates with Ge-Sb-Se-based chalcogenide glass was analyzed by applying a maximum load of about 240 N, confirming its suitability as a sealing material in the far infrared range.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.964-972
• /
• 2010

Objective of this research was to determine the influence of physico.chemical properties of root substrates on growth of daughter plants that were developed through plastic bag cultivation of mother plants in 'Seolhyang' strawberry propagation. Six different formulations of root substrates for daughter plant cultivation were peatmoss + vermiculite (5:5, A), peatmoss + perlite (7:3, B), coir dust + perlite (7:3, C), coir dust + peatmoss + perlite (3.5:3.5:3.0, D), rice-hull + coir dust + perlite (2:7:1, E), and rice hull + coir dust (3:7, F). The 10 cm plastic pots filled with formulated substrates were located near the plastic bag where mother plants were growing. Then the runners and daughter plants originated from mother plants were fixed on each root substrate filled into 10 cm plastic pot and daughter plants were grown in the plastic pots. The container capacity and air space showed big differences among substrates tested. The substrates E and F had the less container capacity and the higher air space than other substrates tested. This indicates that the two substrates would have difficulties in water managements during the raising of daughter plants. The substrates of A, B, and D which contained peatmoss in formulation had higher nitrogen concentrations than those containing coir dust or rice hull. The substrates of E and F which contained rice hull had lower nitrogen, phosphorus and potassium concentrations than those that contained coir. The crown diameters of daughter plants grown in substrate A were around 13 mm which is thicker than those grown in other substrates. The fresh weights of daughter plants grown in A substrate were the heaviest followed by C, F, D, E, and B. The dry weight of daughter plants showed similar tendency to those of fresh weight. The daughter plants which had heavy fresh and dry weights and thick crown diameter are considered good seedlings. Based on this justification, the substrates of A, C and F are acceptable for daughter plant growth of 'Seolhyang' strawberry.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.138-142
• /
• 2008

To develop suitable alternative substrates in hydroponics of sweet pepper, changes of water contents of substrates and electric conductivity (EC) of drainage nutrient solution, growth and fruit characteristics according to the kind of coir substrates were investigated compared with rockwool. In all coir substrates compared with rockwool during growing period, water contents were higher, EC of drainage nutrient solution except for fiber 50% were lower, and the coefficient of variation were a little, especially were so in fiber 30% of coir substrates. Plant growth in fiber 30% substrate was better than others but there was no significant difference. Photosynthesis rate and chlorophyll content were best in fiber 50% substrate. Fruit weight was no significant difference, but LID ratio and shape of the fruits were good in fiber 50% substrate and rockwool as which were close to regular square. Therefore, it was estimated that mixed coir substrates with fiber $30{\sim}50%$ are enough in possibility as alternative substrate.

• Journal of Aquaculture
• /
• v.22 no.1
• /
• pp.118-121
• /
• 2009

This experiment was conducted to evaluate the effects of different substrates in rearing tank on growth and body composition of juvenile sea cucumber Apostichophus japonicus. Sea cucumber (average weight 3.6) were randomly distributed at a density of 10 juvenile per tank into nine tanks providing three different substrates including free-substrates, sand and wave-shaped plastic sheet as (shelter). Juveniles were fed with a commercial feed once in every 2 days for 8 weeks. At the end of the experiment, survival of sea cucumber was not affected by the presence of substrates (P>0.05). Weight gain and specific growth rate of sea cucumber reared in the tanks with sand were significantly higher than those of sea cucumber reared in the tanks with shelter and without substrate (P<0.05). Crude protein and crude lipid of whole body in sea cucumber reared in free-substrate tanks were significantly higher than those of juvenile reared in the tanks with other substrates (P<0.05). Higher ash content was obtained in sea cucumber reared in the tanks with sand compared to that of juvenile reared in the tanks with other substrates (P<0.05). The results of this study suggest that growth and proximate composition of whole body of sea cucumber was significantly affected by substrates. Among materials tested, sand may be a proper substrate for sea cucumber culture.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.258-262
• /
• 2022

Pleurotus species are the most consumed and cultivated mushrooms in Korea. Although oyster mushrooms (P. ostreatus) can be cultivated automatically, their storability is slightly lower than that of king oyster mushrooms (P. eryngii) and winter mushrooms (Flammulina velutipes); therefore, the export proportion of oyster mushrooms is very low. Since Korean mushrooms are highly preferred across Southeast Asian, the export of oyster mushrooms in the form of complete substrates is expected to be more promising than that of fresh mushroom. Here, 1 and 2.5 kg complete substrates of P. ostreatus 'Soltari' and P. sajor-caju 'Sambok' were prepared and stored at different temperature from 0 to 15℃ for 10 days. Thereafter, the formation of fruiting bodies was induced. Since the 2.5 kg complete substrates required 70 days of incubation, their mycelia were at an advanced age and their fruiting bodies did not grown normally. When 70%-incubated complete substrates were stored at 5-10℃, the growth was faster and more uniform and stable fruiting bodies were formed. Export test of complete substrates to Vietnam using distribution containers set at 0℃ and 15℃ revealed that the growth period was shortened by 1-2 days when the distribution containers were set at 15℃ and the yield of 'Soltari' increased by approximately 10%. In addition, even though the yield of 'Sambok' was similar between treatments at 0℃ and 15℃, the quality of fruiting bodies from 15℃-distributed complete substrates was much better than that of those from 0℃-distributed substrates.