• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.63-67
• /
• 1991

Amorphous silicon films were deposited on glass, [100] single crystal silicon wafer with thermally grown silicon dioxide, and [100] silicon wafer substrates by Plasma Enhanced Chemical Vapor Deposition(with argon diluted silane source gas). Growth rate, UV optical band edge, and the hydrogen quantity in the amorphous silicon films have been investigated as a function of the preparation conditions by measuring film thickness, UV-absorbency, and FT-IR transmittance. The growth rate of the ${\alpha}$-Si:H films increases with increasing substrate temperture, flow rate and R.F. power density. The UV optical band edge shifts to blue with the increases in the deposition pressure. Increasing substrate temperature shifts the UV optical band edge of the films to red. Hydrogen quantity in the ${\alpha}$-Si:H films increases with an increases in the R.F. powr and decreases with an increase in the substrate temperature.

• 한국환경보건학회지
• /
• 제20권2호
• /
• pp.28-38
• /
• 1994

New problems have been recently posed on the abnormal foaming (Scum) in an aeration tank and the sludge flotation in a final sedimentation tank during the activated sludge process. However, the activities of the causing bacteria, Nocardia-amarae in an aeration tank have not been searched out at all. Therefore, in this article the activities of Nocardia-amarae in an aeration tank have been closely examined by means of the changes of (F/M) ratio, SRT and inflowing substrate using continuous type and fed-batch type. Summarized results of experiments are as follows. 1. Regrading continuous culture when synthetic wastewater was used substrate neither the increase in the number of Nocardia-amarae in the aeration tank nor the Occurrence of Scum was observed. 2. In the case of fed-batch culture, Nocardia-amarae in the aeration tank increased due to the partial change in substrate and the effect of SRT was significant. 3. Once the scum was formed and the quantity of added Nocardia-amarae and substrate were not changed, the effect of STR was not significant.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
• /
• pp.186-190
• /
• 1996

Laser cladding is a technique for modification on surface in materials. This study describes a laser cladding equipment design and the results of laser cladding nickel on rolled steel for general structure. The laser clsdding equipment designed to consider continuous supply, a fixed quantity. The material used MC plastic. Laser cladding condition is found out by processing parameters. The experiment advanced to suppy substrate with powder. The substrate is rolled steel for general structure(KS D 3503) and powder is using the nickel powder for the corrosion resitance, wear resistance and surface hardness of materials. When the substrate travel on X-Y table, laser beam irradiates to prevent from oxidize with shielding gas on it. The obtained specimens measure the victors hardness test. For the research laser cladding results make a comparative study the microstructure.

• ETRI Journal
• /
• 제35권2호
• /
• pp.340-343
• /
• 2013

A novel bumping process using solder bump maker is developed for the maskless low-volume solder on pad (SoP) technology of fine-pitch flip chip bonding. The process includes two main steps: one is the aggregation of powdered solder on the metal pads on a substrate via an increase in temperature, and the other is the reflow of the deposited powder to form a low-volume SoP. Since the surface tension that exists when the solder is below its melting point is the major driving force of the solder deposit, only a small quantity of powdered solder adjacent to the pads can join the aggregation process to obtain a uniform, low-volume SoP array on the substrate, regardless of the pad configurations. Through this process, an SoP array on an organic substrate with a pitch of $130{\mu}m$ is successfully formed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1715-1717
• /
• 2004

We attempt to investigate morphology of self-assembled dipyridinium dithioacetate on Au(111) substrate by Scanning Tunneling Microscopy(STM). Also, we measured electrical properties using Scanning Tunneling Spectroscopy(STS). Sample that use this experiment acquires thiol function beside quantity by dipyridinium dithioacetate, is structure that can be self-assembled easily to Au(111) substrate. The same self-assembly procedure was used for two different concentrations, 0.5mmol/ml and 1mmol/ml. Dilute density of sample by 0.5mmol/ml, 1mmol/ml and observed dipyridinium dithioacetate's image by STM after self-assembled on Au(111) substrate. The structure of Tip/SAMs/Au(111) has been used measurement for electrical properties(i-v) using STM. The current-voltage measurement result, observed negative differential resistance(NDR) properties.

• 한국균학회지
• /
• 제24권2호통권77호
• /
• pp.89-92
• /
• 1996

폐면을 이용한 느타리버섯(Pleurotus ostreatus (Fr.) Quel)의 가을재배에서 배지량에 따른 자실체 수량과 초발이 소요일수에 미치는 영향을 시험한 결과 전 배지 공히 배지량이 증가할수록 수량이 증가되었으며, 그 중 폐면 + 볏짚 (6 : 4, V/V) 혼합처리가 증수특이 가장 컸으며$(10{\sim}22%)$, 폐면단용처리가 입상량간 증수특이 가장 완만하였다$(7{\sim}15%)$. 초발이 소요일수는 입상량이 적을수록 빨랐고, 특히 왕겨혼합처리(5 : 5, V/V) $50\;kg/m^2$가 다소 빠른 경향이었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.98-106
• /
• 2005

The chemical conversion film formed on magnesium alloy was investigated by using the colloidal silica with some parameters such as solution pH. temperature, solution conditions, and treatment time. Moreover. the solutions consisted of colloidal silica titanium sulfate, and cobalt ions were used for the colloidal silica film to having a good corrosion resistance and adhesion properties. It was thought that the film at 298K was made with combination of Si-O. The quantity of film formed at high temperature such as 333K and 353K is smaller than dissolved quantity during chemical conversion treatment. Adding $CoSO_4$ to the colloidal silica solution enhanced the adhesion force between the silica film and magnesium substrate, The optimum conditions for the chemical conversion treatment solution were PH 2.90 s treatment, and 298K.

• 한국환경과학회지
• /
• 제33권1호
• /
• pp.17-25
• /
• 2024

This study aimed to determine the most suitable coir substrate mixing ratio for optimizing the growth and yield of the "lpduelkkae 1" cultivar. We comprehensively analyzed the physicochemical properties, growth, and yields of four different substrate combinations: perlite (coir with mixing ratios of 70:30 (PC30), 50:50 (PC50), and 30:70 (PC70)) and 100% coir (C100). The results revealed substantial differences in substrate properties. C100 exhibited the highest total porosity and the lowest solid phase, indicating excellent air permeability. The pH levels and electrical conductivity (EC) values ranged from 5.4-6.8 and 1.2-3.1 dS·m^-1, respectively. Leaf growth parameters, including length, width, and dry weight, showed positive correlations with high coir ratios, except for PC30. PC70 and C100 outperformed other substrates in stem growth, exhibiting superior stem diameter and fresh and dry weights. The quantity of marketable leaves was the highest in the C100 substrate. Furthermore, C100 comprised integrated levels of essential nutrients, such as Ca and Mg, owing to its high coir content. In conclusion, a coir ratio of approximately 70% (v/v) should be maintained in the substrate for creating an optimal cultivation environment. Furthermore, the selection of humidity-resistant varieties as well as precise nutrient and moisture management for different seasons and growth stages are crucial for a successful perilla leaf hydroponic cultivation.

• 한국표면공학회지
• /
• 제31권4호
• /
• pp.181-190
• /
• 1998

Al ion plating was carried to improve corrosion resistance of Nd-based permanent magnet made by prwder molding method. The effects of applied votage, pressyre and temperature were investigated to find the reation between coating parameters and their properties. Density of coating layer increased with voltage and thus corrosion resistance improved. However when voltage was applied more than 1000V, corrosion resistance whet down because of resputtering effect. Good corrosion resistance was acquired when gas pressure was $5.0\times10^-2$>torr, which is satisfied momentum energy of Ar, Al ions as well as quantity of plasma. The layer coated in low temperature range have better surface density and corrosion resistance than in high temperature. This result is seemed due to the characteristics of substrate itself. All coating layers were showed stong adhesion with substrate.

• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.805-808
• /
• 2008

Ginsenosides are responsible for the pharmacological and biological activities of ginseng. In this study, ginsenoside Rh1 and compound K were isolated and purified from fermented ginseng substrate and their anti-allergic effects were assessed in compound 48/80-induced anaphylactic shock model. The fermented ginseng substrate was extracted by methanol and ginsenoside Rh1 and compound K were efficiently purified by preparative high performance liquid chromatography (prep HPLC). Their quality and quantity were analyzed by liquid chromatography-mass spectrometer (LC-MS) and HPLC. Ginsenoside Rh1 showed better anti-allergic effects than compound K in compound 48/80-induced anaphylactic shock model. This study suggested that fermented ginseng extracts with enriched Rh1 may be utilized as a potential biomaterial of functional food for the alleviation of allergic symptoms.