• Title/Summary/Keyword: Substrate Depth

Search Result 351, Processing Time 0.025 seconds

The Effectiveness of the Dispersant Use during the "Deepwater Horizon" Incident -REVIEW of the Proceedings from 2011 International Oil Spill Conference- (미국 멕시코만 기름유출사고에서 본 유처리제 사용의 효용성 고찰)

  • Cho, Hyun-Jin;Ha, Chang-Woo
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.18 no.1
    • /
    • pp.61-65
    • /
    • 2012
  • Once oil has spilled, oil spill responders use a variety of countermeasures to reduce the adverse effects of spilled oil on the environment. Mechanical methods of containment and recovery are preferred as the first response when the use of other methods fail or are ineffective. In these cases, the application of oil dispersants shall be use only as a last resort. While effectiveness of dispersants in removing oil form the sea surface is proven, the use of dispersants is controlled in almost all countries due to the toxicity of their active agents and the dispersed oil on the marine environment. However, according to reports, after dispersant application, no significant toxicity to fish or shrimp was observed in the field-collected samples. Moreover, the results also indicate that dispersant-oil mixtures are generally no more toxic to the aquatic test species than oil alone. During the Deepwater Horizon Incident, dispersants were applied to floating oil and injected into the oil plume at depth. These decisions were carefully considered by state and federal agencies, as well as BP, to prevent as much oil as possible from reaching sensitive shoreline habitats. Net Environmental Benefit Analysis for dispersant use assumed that dispersants appear to prevent long-term contamination resulting absence of oil in the substrate and will benefit marine wildlife by decreasing the risk of significant contamination to feathers or fur. Further study to use dispersants with scientific baseline is needed for our maritime environment which consistently threaten huge oil spill incidents occurrence.

Covering Types and Covering Ratio Changes of Planted Species on an Extensive Green Roof (관리조방형 옥상녹화 식재식물의 피복률 변화 및 피복유형)

  • Jang, Ha-Kyung;Lee, Eun-Heui
    • Korean Journal of Environment and Ecology
    • /
    • v.25 no.3
    • /
    • pp.404-411
    • /
    • 2011
  • The purpose of this study was to analyze the characteristics of plant covering in the extensive green roof site. Eighteen herbaceous perennial grass such as Caryopteris incara and sedum species such as Sedum Kamtschaticum were planted on an experimental green roof with 10cm substrate depth in 2007. This study investigated vegetation change over 3 growing seasons 2007-2009. The covering rates of planted species mostly increased in 2008, but declined in 2009 except 6 species such as sedum specis and Thymus quinquecostatus var. japonica etc. There were four categories of covering characteristics generated from the results of this study. These include the type of sustain planting site, the type of encroach adjacent site, the type of creeps and spreads, and the type of scatters and spreads. The covering models of eight planted species were drawn by simple regression analysis. However more monitoring of various plants will be needed to establish the information for sustainable roof planting plan.

Synthesis of YSZ Thin Films by PECVD (PECVD에 의한 YSZ(Yttria Stabilized Zirconia)박막 제조)

  • Kim, Gi-Dong;Sin, Dong-Geun;Jo, Yeong-A;Jeon, Jin-Seok;Choe, Dong-Su;Park, Jong-Jin
    • Korean Journal of Materials Research
    • /
    • v.9 no.3
    • /
    • pp.234-239
    • /
    • 1999
  • A Abstract Yttria-stabilized zirconia(YSZ) thin films were synthesized by plasma enhanced chemical vapor deposition process. $Zr[TMHD]_4$ $Y[TMHD]_3$ precursors and oxygen were used with the deposition temperature of $425^{\circ}C$ and rf power ranging 0-100 watt. Effects of the deposition parameters were studied by X-ray diffraction and thickness anal­ysis. YSZ thin films have cubic crystal structure with (200) orientation. From the results of EDX analysis, the converte ed content of TEX>$Y_2O_3$ was determined to be 0-36%, and the film thickness was increased with bubbling temperature which is considered to be due to increasing TEX>$Y_2O_3$ flux. The depth profiles of Zr, Y and 0 appeared relatively $\infty$nstant through film thickness. Columnar grains of $1000~2000\AA$ grew vertical to the substrate surface for the case of Ar carri­er gas. In case of He carrier gas, the grain size was observed to be about $1000~2000\AA$. X-ray diffraction data showed the increase of lattice constant with TEX>$Y_2O_3$ content. It was that the presence of the cracks formed during film deposition, partially released the stress generated by the increase of lattice constant.

  • PDF

Nonlinear Flexural Analysis of RC Beam Rehabilitated by Very-Early Strength Latex-Modified Concrete (초속경 라텍스개질 콘크리트로 보강된 RC보의 비선형 휨해석)

  • Choi, Sung-Yong;Yun, Kyong-Ku;Kim, Yong-Bin;Kang, Mun-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.11
    • /
    • pp.4635-4642
    • /
    • 2010
  • Latex modification of concrete provides the material with higher flexural strength, as well as high bond strength and reduced water permeability. One of the most advantages of the very early-strength latex-modified concrete (VES-LMC) could be the similar contraction and expansion behaviour to normal concrete substrate, which enable to ensure long-term performance. The purpose of this study was to parametric nonlinear flexural nonlinear analysis of RC beam rehabilitated by VES-LMC. The results were as follows; The flexural nonlinear analysis model of RC beam overlaid by VES-LMC in ABAQUS was proposed to predict the load-deflection response, interfacial stress, and ultimate strength. The proposed FE analysis model was verified by comparison of an experimental data and the FE analysis results. The FE analysis results showed that yield point as well as flexural stiffness increased as the depth increased; the stiffness of beam overall increased as the bond stiffness became larger; the bond strength between two different materials is a key factor in composite beam. A parametric study showed that an overlay thickness was a main influencing factor to the behavior of RC beam overlaid by VES-LMC.

Analysis of Fish Community according to Habitat in the Woraksan National Park, Korea (월악산국립공원의 서식지에 따른 어류군집 분석)

  • Park, Seung-Chul
    • Korean Journal of Environment and Ecology
    • /
    • v.35 no.5
    • /
    • pp.490-502
    • /
    • 2021
  • This study was conducted to analyze the current status of fish fauna and characteristics of the fish community according to the habitat of Woraksan National Park, Korea. The spatially balanced sampling selected 20 stations from major streams of Woraksan National Park, and three surveys were conducted in each season. The physical environments of the habitat were mostly mountain streams (Aa), with large stones and gravels scattered over the stream. The average altitude of the habitat was 304.4 m, and the average depth of water was 40.3 cm, being less than 1 m in most cases, and the river water level was distributed from 3rd to 5th streams. The principal component analysis of the physical environmental factors by habitat showed that the substrate properties differed according to the altitude. The survey identified a total of 2,183 individuals in 16 species belonging to 7 families. The dominant species was Zacco koreanus(86.2%), and the subdominant species was Rhynchocypris oxycephalus(3.8%). Pseudopungtungia tenuicorpa, classified as the endangered wildlife II, was the first endangered legally protected species found in this survey. Analysis of the rank abundance curve model in the fish community showed the Zipf model at 9 out of 20 points, the Lognormal model in 3 points, and the Preemption model in 4 points. The remaining 4 habitats showed only one species and were not analyzed. The canonical correspondence analysis of 20 stations and fish species was performed to understand the characteristics of the fish community according to environmental factors. The fish communities were divided according to differences in habitat environment by the altitude.

Environmental Characteristics and Fish Community of Small First-order Stream (1차 소하천의 환경특성 및 어류군집)

  • Moon, Woon-Ki;An, Kwang-Guk
    • Korean Journal of Ecology and Environment
    • /
    • v.40 no.1
    • /
    • pp.163-172
    • /
    • 2007
  • In this study, fish fauna and stream characteristics were surveyed during October-November 2003 in 31 small streams, which are small sub-tributaries of Geum River. The small streams were classified into 4 types of steep mountainous (SM), mountainous-flatland (MF), flat land (FL), and agricultural watercourse (AW) streams, and their types were categorized by features of stream width, water depth, bottom substrate, riparian vegetation, and landuse patterns. The fishes collected during this survey were identified 4 families and 8 species. Dominant family was Cyprinidae, and the most dominant species was Rhynchocypris oxycephalus with 73% (419 individuals) of the total. Only one species of R. oxycephalus was observed in the all five steep mountainous streams, which was surrounded by 100% forest area and had no point-and non-point pollution sources. The observed frequency of R. oxycephalus (as a relative proportion of species) showed a significant positive correlation (r=0.754, p<0.001, n=31) with the substrate composition of bedrock and boulder, indicating that the species prefer the bedrock and boulder rather than the sand or small pebble. Evidently, all five steep mountainous streams were judged as excellent condition (1st rank) according to the criteria of biological water quality, the Ministry of Environment, Korea. This result was accord with a general tendency of the species in most upper stream of the Koreas streams. One family and one species were found at the steep mountainous types and 4 families 6 species were at the mountainous-flatland. Four families 8 species were found at the flat land, which showed most diverse habitat, and 2 families 2 species were collected agricultural watercourse. These study results of 1st-order streams suggest that R. oxycephalus was considered as one of 1st rank ecological indicator species, and that the dominant area should be protected from various pollutions and disturbances.

Distribution Patterns of Benthic Macroinvertebrates in Streams of Korea (우리나라 주요 하천 수계에서 저서성 대형무척추동물의 분포 특성)

  • Kwak, Ihn-Sil;Lee, Dae-Seong;Hong, Cheol;Park, Young-Seuk
    • Korean Journal of Ecology and Environment
    • /
    • v.51 no.1
    • /
    • pp.60-70
    • /
    • 2018
  • The distribution of benthic macroinvertebrates was investigated at 1,157 sites of 7 main water systems in Korea, including 442 sites of Han River system (Namhan River, Bukhan River, Han River main stream, Anseongcheon, etc.), 305 sites of Nakdong River system (Nakdong River, Hyeongsan River, Taehwa River, etc.), 199 sites of Geum River system (Geum River, Sapgyocheon, Mangyeong River, Dongjin River, etc.) 102 sites of Seomjin River system (Seomjin River), 102 sites of Yeongsan River system (Yeongsan River, Tamjin River, etc.), and 7 sites of Jeju stream system. A total of 151 families were found in the whole survey sites, including 141 families in Han River, 122 in Nakdong River, 115 in Geum River, 106 in Seomjin River, 113 in Yeongsan River, and 50 in Jeju. Chironomidae (20.8%) was the most dominant species in Korea, followed by Hydropsychidae (17.1%), Baetidae (12.6%), Tubificidae (10.3%), Heptageniidae (8.6%), Ephemerellidae (6.3%), Asellidae (2.7%), Leptophlebiidae (2.4%), Planariidae (1.7%), and Tipulidae (1.6%). Substrates compositions consisted of large sand (22.6%), large gravel (18.4%), silt (10.5%), and boulder (8.2%). The mean stream width was 133.5 m and the mean watercourse width was 61.7 m. The mean water depth and velocity were 30.2 cm and $33.1cm\;s^{-1}$, respectively. Results of cluster analysis based on distributional characteristics of benthic macroinvertebrates were divided into six groups according to the frequency of benthic macroinvertebrate taxa which appeared in the study area. Finally, altitude, current velocity and substrate composition were the most influencial factors determining the distribution patterns of macroinvertebrate communities.

The relationship between the population characteristics and physical habitat of Manchurian trout(Brachymystax lenok tsinlingensis) in the Geybangcheon stream (계방천에 서식하는 열목어의 개체군 특성 및 물리적 서식환경과의 상관관계)

  • Ko, Min Seop;Choi, Jun Kil;Lee, Hwang Goo
    • Korean Journal of Environmental Biology
    • /
    • v.39 no.1
    • /
    • pp.108-118
    • /
    • 2021
  • The purpose of this study was to provide baseline ecological data for the conservation of the Manchurian trout habitat through the investigation of the growth status of Brachymystax lenok tsinlingensis, and Pearson's correlation analysis (PCA) between the B. lenok tsinlingensis population and the use of the land around Gyebangcheon stream. Sampling was conducted twice in July, September, and October 2018. During the July and September surveys, 882 individuals belonging to 13 species from six families were collected. The dominant species was Rhynchocypris kumgangensis and the subdominant species was Zacco koreanus. The total number of B. lenok tsinlingensis collected was 99. The results of the length-weight relationship in the B. lenok tsinlingensis population were analyzed with a regression coefficient b value of 3.1272 and a condition factor (k) value of 0.0006. Therefore, the growth condition of B. lenok tsinlingensis was regarded as fairly good. The QHEI(Qualitative habitat evaluation index) value in the B. lenok tsinlingensis habitat was 119.5(±0.5)-153.5(±0.5), indicating optimal-suboptimal conditions. As a result of the HIS (Habitat suitability index) analysis, it was confirmed that the optimal habitat for B. lenok tsinlingensis was 0.45-0.55m and >1 m in water depth, 0.55-0.65 m s-1 in water velocity, and boulder in the substrate. The ratio of the land use in this study site was analyzed as 66.26-96.31% for forest and grassland areas, 0.00-23.79% for agricultural areas, 0.00-4.19% for urbanized areas, and 3.69-8.87% for others. Correlation analysis of the number of B. lenok tsinlingensis and various factors revealed statistically significant correlations between QHEI and forest and grassland areas, agricultural areas, and urbanized areas.

Estimation of ecological flow and fish habitats for Andong Dam downstream reach using 1-D and 2-D physical habitat models (1차원 및 2차원 물리서식처 모형을 활용한 안동댐 하류 하천의 환경생태유량 및 어류서식처 추정)

  • Kim, Yongwon;Lee, Jiwan;Woo, Soyoung;Kim, Soohong;Lee, Jongjin;Kim, Seongjoon
    • Journal of Korea Water Resources Association
    • /
    • v.55 no.12
    • /
    • pp.1041-1052
    • /
    • 2022
  • This study is to estimate the optimal ecological flow and analysis the spatial distribution of fish habitat for Andong dam downstream reach (4,565.7 km2) using PHABSIM (Physical Habiat Simulation System) and River2D. To establish habitat models, the cross-section informations and hydraulic input data were collected uisng the Nakdong river basic plan report. The establishment range of PHABSIM was set up about 410.0 m from Gudam streamflow gauging station (GD) and about 6.0 km including GD for River2D. To select representative fish species and construct HSI (Habitat Suitability Index), the fish survey was performed at Pungji bridge where showed well the physical characteristics of target stream located downstream of GD. As a result of the fish survey, Zacco platypus was showed highly relative abundance resulting in selecting as the representative fish species, and HSI was constructed using physical habitat characteristics of the Zacco platypus. The optimal range of HSI was 0.3~0.5 m/s at the velocity suitability index, 0.4~0.6 m at the depth suitability index, and the substrate was sand to fine gravel. As a result of estimating the optimal ecological flow by applying HSI to PHABSIM, the optimal ecological flow for target stream was 20.0 m3/sec. As a result of analysis two-dimensional spatial analysis of fish habitat using River2D, WUA (Weighted Usable Area) was estimated 107,392.0 m2/1000 m under the ecological flow condition and it showed the fish habitat was secured throughout the target stream compared with Q355 condition.

Analysis of the Effect of the Etching Process and Ion Injection Process in the Unit Process for the Development of High Voltage Power Semiconductor Devices (고전압 전력반도체 소자 개발을 위한 단위공정에서 식각공정과 이온주입공정의 영향 분석)

  • Gyu Cheol Choi;KyungBeom Kim;Bonghwan Kim;Jong Min Kim;SangMok Chang
    • Clean Technology
    • /
    • v.29 no.4
    • /
    • pp.255-261
    • /
    • 2023
  • Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.