• 대한수학회논문집
• /
• 제16권3호
• /
• pp.519-541
• /
• 2001

Magnetic Resonance Electrical Impedance Tomography(MREIT) is a new medical imaging technique for the cross-sectional conductivity distribution of a human body using both EIT(Electrical Impedance Tomography) and MRI(Magnetic Resonance Imaging) system. MREIT system was designed to enhance EIT imaging system which has inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. MREIT utilizes a recent CDI (Current Density Imaging) technique of measuring the internal current density by means of MRI technique. In this paper, a mathematical modeling for MREIT and image reconstruction method called the alternating J-substitution algorithm are presented. Computer simulations show that the alternating J-substitution algorithm provides accurate high-resolution conductivity images.

• The Journal of the Acoustical Society of Korea
• /
• 제29권3E호
• /
• pp.131-139
• /
• 2010

This paper proposes a novel spectral hole substitution technique for low bit-rate audio coding. The spectral holes frequently occurring in relatively weak energy bands due to zero bit quantization result in severe quality degradation, especially for harmonic signals such as speech vowels. The enhanced aacPlus (EAAC) audio codec artificially adjusts the minimum signal-to-mask ratio (SMR) to reduce the number of spectral holes, but it still produces noisy sound. The proposed method selectively predicts the spectral shapes of hole bands using either intra-band correlation, i.e. harmonically related coefficients nearby or inter-band correlation, i.e. previous frames. For the bands that have low prediction gain, only the energy term is quantized and spectral shapes are replaced by pseudo random values in the decoding stage. To minimize perceptual distortion caused by spectral mismatching, the criterion of the just noticeable level difference (JNLD) and spectral similarity between original and predicted shapes are adopted for quantizing the energy term. Simulation results show that the proposed method implemented into the EAAC baseline coder significantly improves speech quality at low bit-rates while keeping equivalent quality for mixed and music contents.

• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.49-57
• /
• 1998

This study is to develop a new synthetic method for the nitroarenes via non-electrophilic substitution. Direct nitration at the C-1 position of isoquinoline has never been reported and substitution in isoquinoline under the normal nitration condition occurs at C-5 and C-8. We have demonstrated a facile one-step sythetic method for the nitration of isoquinolines at the C-1 position, which involves the electrophilic attack of a $DMSO-Ac_2O$ complex, followed by nucleophilic addition of nitrate ion to this intermediate. Since the reaction is simple and mild, this method has preparative merit since 1-nitroisoquinolines are not readily accessible by other methods. Application to the synthesis of poly nitroarenes from the corresponding anilines was also described.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.25-35
• /
• 1990

To investigate the effects of swelling treatment by ammonia on characteristics of carboxymethy1cellulose(CMC) and CMC solution, the domestic kraft pulp pretreated with 5%, 10%, 15% and 20% $NH_4OH$ solution, was carboxymethylated by the standard method, and then the CMC prepared was tested. The physical properties of CMC and CMC solution, such as degree of substitution, transparency. viscosity, weight increase and solubility, were measured, and the comparison with commercial domestic CMC used as a food additive was done. The results obtained were as follows; 1. In CMC manufactured by standard solvent method, hardwood bleached kraft pulp(LBKP) was more substituted than safwood bleached kraft pulp(NBKP), and viscosity of NBKP was higher than that of LBKP. 2. When ammonia swelling treatment was done, degree of substitution gradually decreased with increasing concentration of $NH_4OH$, and degree of substitution of LBKP decreased with a larger range than that of NBKP. 3. When ammonia swelling treatment was done. transparency of CMC solution from LBKP was hardly effected, but in case of NBKP gradually increased with increasing concentration of $NH_4OH$. 4. When ammonia swelling treatment was done, viscosity of CMC solution was higher than that of CMC solution without ammonia swelling treatment. Especially, CMC of high viscosity could be manufactured in 5%, 10% concentration levels of $NH_4OH$. 5. In CMC manufactured from domestic NBKP, CMC at the range of 0.40 to 0.50 in DS was dispersed easily and quickly dissolved, and CMC at more than 0.50 in DS was dispersed slowly in water solution. 6. In comparison with commercial domestic CMC used as a food additive, CMC manufactured from domestic NBKP was higher in DS, and was lower in viscosity and transparency.

• 한국식품과학회지
• /
• 제22권6호
• /
• pp.651-658
• /
• 1990

옥수수전분에 인산화반응 시약으로 Sodium tripolyphosphate(STPP)를 반응시켜 건식법, 호화법 및 Extrusion 공법에 의하여 인산전분을 제조하고 그 이화학적 성질을 비교하였다. 건식법에 의한 인산전분(DSP) 제조시 반응온도는 인산염 치환도에 가장 큰 영향을 미치는 인자로 작용하였다. 호화법에 의해 인산전분(GSP)을 제조하였을 경우는 건식법보다 치환도가 증가하였으나 반응온도가 $85^{\circ}C$ 이상에서는 큰 변화가 없었다. Extrusion공정에 의한 인산전분(WESP) 제조는 원료수분 20, 25, 30%에서 치환도 $0.0066{\sim}0.0083$의 값을 보였다. DSP 시료의 호화온도는 치환도가 증가할 수록 낮아졌고 투명도가 증가되었으나 WESP 시료는 원료전분보다 높은 호화온도를 보였다. 인산전분 extrudate의 겉보기 점도는 DSP 시료보다 낮은 점도값을 보였다. 모든 인산전분 시료가 원료전분에 비해 높은 노화안정성을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.30-36
• /
• 1994

Steam explosion process is one of the most efficient, pretreatment method for the utilization of lignocellulosic biomass. The carbxymethyl-cellulose(CMC) was prepared with steam exploded wood(EXW), pine(Pinus densiflora) and oak(Quercus mongolica), by standard method using isopropyl alcohol and monochloroacetic acid. The range of water solubility of carboxymethylated pine exploded wood was 45.2~66.8 % and those of oak was 60.7~84.7 %. The degree of substitution(D.S) of carboxymethylated pine exploded wood was 0.11~0.33 and oak exploded wood was 0.48~0.76. The color of carboxymethylated pine and oak exploded wood was brown-black. When carboxymethylated EXW was purified by sulfuric acid, the yield of carboxymethylated wood was lower than non-treated one. However, the color was still brown-black although after delignification. In carboxymethylated EXM prepared after delignification, the water solubility and degree of substitution(D.S) of pine were 81.4~95.9 % and 0.71~0.79, and those of oak were 76.2~89.5 % and 0.79~1.05. The values were higher than non-treated. The degree of substitution of purified carboxymethylated wood prepared with delignified EXM, pine and oak were 0.50~0.71 and 0.70~0.88. The color of carboxymethylated wood was white. In carboxymethylated wood preparde after delignification of EXM, swelling ratio and water retention value of pine were 95.9~96.5 and 580.0~751.2, those of oak were 76.2~89.5 and 124.3~307.6.

• Composites Research
• /
• 제32권1호
• /
• pp.29-36
• /
• 2019

본 논문의 목적은 소재대체법과 치수최적화 기법을 이용한 2층 고속열차 알루미늄 압출재 차체의 경량 설계를 제시하는 것이다. 소재대체법을 수행하기 위해 위상최적화 기법을 이용하여 차체 구조물의 샌드위치 복합재 적용 부위를 결정하였다. 해석결과, 루프와 2층 언더프레임에 샌드위치 복합재가 적용 가능함을 보여주었다. 치수최적화는 알루미늄 압출재와 카본/에폭시 복합재의 두께를 결정하는데 사용되었다. 치수최적화를 수행하기 위해, 설계변수, 제약조건, 목적함수를 정식화 하였으며 이러한 조건에 의해 유효설계를 도출하였다. 경량 설계의 결과로 2층 고속열차 하이브리드 차체의 무게를 2.18 ton(17.70%)까지 줄일 수 있음을 보여주었다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

PURPOSES : The objective of this study is to develop an optimized method of mix design for rapid-set lightweight-formed mortar mix. To achieve this objective, the workability, setting time, and compressive strength of mixes under various conditions of mix design were evaluated. METHODS : The water-bonder ratio, fly-ash substitution ratio, and forming agent injection amount were selected as design variables in the study. The fluidity, setting time, density, and strength of the mortar mix were considered as major evaluation criteria of the mixture, and were subsequently utilized to evaluate the characteristics of the mortar mix under various conditions. RESULTS : The observations made from the mix design process are as follows: 1) the air content and fluidity increase as the forming agent ratio and forming agent ratio increase, respectively; 2) the maximum air content is approximately 20%; 3) the accelerating agent decreases the fluidity of the mortar mix by 15% on average; 4) the forming agent injection ratio and fly-ash substitution ratio yield significant effects on the initial and final set times of the mortar mix; 5) as the forming agent injection ratio and fly-ash substitution ratio increase, the compressive strength of the mortar mix decreases; and 6) the 28-day compressive strengths of the forming agent injection ratio and fly-ash substitution ratio yield the most significant effects. CONCLUSIONS : It is concluded that the governing design variables for the rapid-set lightweight-formed mortar mix are the forming agent injection ratio and fly-ash substitution ratio.

• 한국국방경영분석학회지
• /
• 제12권2호
• /
• pp.1-21
• /
• 1986

Data Security in computer communication is becoming serious problem with developing computer network. This paper intended to design an encryption system to improve processing speed and to get higher degree of security by combining random number generation method, substitution method and Vernam's encryption method.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.406-406
• /
• 2004