• Wind and Structures
• /
• v.12 no.2
• /
• pp.103-120
• /
• 2009

Articulated tower platforms due to its compliant nature are more susceptible to the dynamic effects of wind than conventional fixed platforms. Dynamic response analysis of a double hinged articulated tower excited by low frequency wind forces with random waves is presented in this paper. The exposed super structure of the platform, housing the drilling and production facilities is subjected to mean and fluctuating wind loads, while the submerged portion is acted upon by wind driven waves. The fluctuating component of the wind velocity is modeled by Emil Simiu's spectrum, while the sea state is characterized by Pierson-Moskowitz spectrum. Nonlinearities in the system due to drag force, added mass, variable submergence and instantaneous tower orientation are considered in the analysis. To account for these nonlinearities, an implicit time integration scheme (Newmark's-${\beta}$) has been employed which solves the equation of motion in an iterative fashion and response time histories are obtained. The power spectra obtained from random response time histories show the significance of low frequency responses.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.413-433
• /
• 2017

The dynamic and structural responses of a 1000-m long circular submerged floating tunnel (SFT) with both ends fixed under survival irregular-wave excitations are investigated. The floater-mooring nonlinear and elastic coupled dynamics are modeled by a time-domain numerical simulation program, OrcaFlex. Two configurations of mooring lines i.e., vertical mooring (VM) and inclined mooring (IM), and four different buoyancy-weight ratios (BWRs) are selected to compare their global performances. The result of modal analysis is included to investigate the role of the respective natural frequencies and elastic modes. The effects of various submergence depths are also checked. The envelopes of the maximum/minimum horizontal and vertical responses, accelerations, mooring tensions, and shear forces/bending moments of the entire SFT along the longitudinal direction are obtained. In addition, at the mid-section, the time series and the corresponding spectra of those parameters are also presented and analyzed. The pros and cons of the two mooring shapes and high or low BWR values are systematically analyzed and discussed. It is demonstrated that the time-domain numerical simulation of the real system including nonlinear hydro-elastic dynamics coupled with nonlinear mooring dynamics is a good method to determine various design parameters.

• STI Policy Review
• /
• v.4 no.1
• /
• pp.1-13
• /
• 2013

The Schumpeterian process of "creative destruction", associated with the emergence and diffusion of new radical, so-called "general purpose" technologies, has throughout history impacted wealth and income, jobs creation, jobs displacement, and the emergence and submergence of new hotspots of innovation. Emerging countries have benefited most from such a renewing of those societies' dynamics, leading them to higher levels of economic development and welfare. Doing so they have shown a remarkable capacity in moving upstream in the value chain, from outsourcing of manufacturing activities to autonomous process technology development, product development, design, and applied research. At the same time however, such Schumpeterian processes have now and then turned into exactly opposite processes of "destructive creation." Such processes seem to have become common among what could be called "submerging" economies: innovation only benefitting a few at the expense of many with as a result an opposite pattern of a long term reduction in overall welfare, productivity, and employment growth.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.213-216
• /
• 2005

Salt attack and freezing & thawing test, one of the combined deterioration tests was performed to explore the mechanism of concrete structure deterioration under marine environment. Simple submerging test was proceeded to draw out its diffusion factor with salt water at the same time. Some of the mechanisms were driven with using three types of cements and four kinds of salt water concentrations. $\circ$ TBC was more durable than OPC or SRC for freezing and thawing action $\circ$ The higher chloride concentration of salt water was, the faster relative dynamic elastic modulus decreased and the higher the loss of weight was. $\circ$ The diffusion factor of TBC was smaller than those of TBC or SRC at simple submergence of concrete specimens into salt water.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1662-1666
• /
• 2010

Growth and other biological processes in aquatic organisms are particularly dependent on water temperatures. This study examined the effects of water temperature on the growth of Triops longicaudatus. The influence of water temperature fluctuations was that growth rate was increased at higher temperatures. The mean carapace length was 5.7 (${\pm}2.1$) mm in a water temperature of $20^{\circ}C$ and 7.5 (${\pm}0.5$) mm in a water temperature of $28^{\circ}C$ on the 14th day after submergence. It was 6.9 (${\pm}2.8$) mm in a water temperature of $20^{\circ}C$ and 7.8 (${\pm}2.0$) mm in a water temperature of $28^{\circ}C$ on the 21st day after submergence. The mean carapace length grew rapidly within 14 days after submergence, but increase in carapace length beyond this time was slow. The influence of water depth fluctuations was low as the mean carapace length was 9.3 (${\pm}2.1$) mm under a water depth of 80 mm and 9.5 (${\pm}1.3$) mm under a water depth of 190 mm on the 19th day after submergence. Biomass showed that the carapace length of 5, 10, 16 and 20 mm was a dry-weight of 1.1 (${\pm}0.3$), 18.0 (${\pm}3.7$), 26.0 (${\pm}0.0$) and 52.3 (${\pm}4.0$) mg respectively. The number of eggs increased rapidly with increments in carapace length. The mean number of eggs was 20 (${\pm}0.0$) at a carapace length of 7.0 mm, but at a carapace length of 17.0 mm, the mean number of eggs was 560 (${\pm}0.0$). The results suggested that differences in water temperature accounted for the differences in length of the carapace and the number of eggs.

• Journal of Navigation and Port Research
• /
• v.35 no.7
• /
• pp.575-580
• /
• 2011

It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.

• Economic and Environmental Geology
• /
• v.4 no.1
• /
• pp.39-43
• /
• 1971

The Korean Peninsula is located between the tectonically stable Asian Continent and the tectonically active Japanese islands. The east coast of Korea shows evidence of uplift whereas the west coast shows evidence of submergence. However, radiocarbon dates indicate that the rate of submergence of the west coast of Korea is slower than the tectonically stable east coast of North America. Therefore, both east and west coasts of Korea might have been uplifted during the last post-glacial period. This uplift may result the spreading line of the from compressional strain produced along East Sea of Korea (Japan Sea) and/or the conversion hinge line of the Pacific mantle convection current plunging beneath the Asian continent. This downturn is supposed to be located in the Japan Trench. High heat flow near the east coast of Korea produces the differential strain. This strain accelerates the compressional strain of the peninsula. The Sea Floor Spreading Theory can explain the tectonism of the Korean Peninsula in Recent time. Baek-Doo Mt. and Han-Ra Mt., dormant volcanoes, may be an evidence of westward movement of the Korean Peninsula.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.3
• /
• pp.208-218
• /
• 2017

The performance of a wave energy converter (WEC) that uses the rolling motion of a partially submerged pendulum plate in front of a quay wall was analyzed. The wave exciting moment and hydrodynamic moment were obtained using a matched eigenfunction expansion method (MEEM) based on the linear potential theory, and then the roll motion response of a pendulum plate, time averaged extracted power, and efficiency were investigated. The optimal PTO damping coefficient was suggested to give the optimal extracted power. The peak value of the optimal extracted power occurs at the resonant frequency. The resonant peak and its width increase as the submergence depth of the pendulum plate decreases and thickness of the pendulum plate increases. An increase in the wave incidence angle reduces the efficiency of the wave energy converter. In addition, the WEC using a rolling pendulum plate contributes not only to the extraction of the wave energy, but also to a reduction in the waves reflected from the quay wall, which helps to stabilize ships going near the quay wall.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.13-14
• /
• 2003

It is generally well known that Quaternary is characteristic geologically in terms of glacial and interglacial repeats and their associated unconformity formation. This paper deals with the first finding of the characteristic and significant meaningful unconformity between Holocene and late Pleistocene, which implies submergence and emergence of the tidal sedimentary basin along the western coastal zone of Korea during interglacial stage(IOS-5e) and glacial time(IOS-2). The stratigraphy of intertidal deposits in the Haenam Bay, western coast of Korea shows two depositional sequence units (Unit I of Holocene and Unit II of late Pleistocene) bounded by an erosional surface of disconformity. The disconformity is related to the latest Pleistocene sea-level lowstands (probably during the LGM). The Unit II is interpreted as intertidal deposit showing tidal sedimentary structures and crab burrow ichnology and has two parts (the upper part and the lower part) showing different lithology and character. The upper part of Unit II shows characteristic subaerial exposure features (emergence) and its related lithology. Such subaerially exposed upper part (more or less 4m to 5m in thickness) is characterized by yellow-brownish sediment color, cryoturbat-ed structure, crab burrow ichnofacies and high value of shear strength. Geochemical and clay mineral analyses of the upper part sediments also indicate subaerial exposure and weathering. In particular, very high value of magnetic susceptibility of the upper part in comparison to that of the lower part is interpreted as pedogenetic weathering during the subaerial exposure period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.3
• /
• pp.590-596
• /
• 1997

Ankylosis is defined as a fusion of alveolar bone with dentin and/or cementum and may occur at any time during or following active eruption. Ankylosed teeth maintain existing occlusal levels while adjacent teeth continue to erupt via deposition of alveolar bone. This may result in the clinical appearance of depression or submergence of ankylosed teeth below the occlusal plane. It is found more frequently in children of late mixed dentition and in mandibular primary molars. The problems arising from ankylosed teeth, due to their submerged positions, are elongation of the antagonist, tipping of the adjacent teeth, loss of arch length, food impaction and subsequent destruction of periodontal tissue, disturbance of succedaneous tooth eruption. The author observed several cases of ankylosed primary molars and properly managed. Following results were obtained. 1. Severe infraoccluded ankylosis results in loss of arch length and undesirable effect on eruption path of succedaneous tooth, therefore early diagnosis and management are important. 2. The teeth without problems may be examined periodically and restored in order to maintain the normal occlusal function.