• 환경위생공학
• /
• 제16권1호
• /
• pp.34-39
• /
• 2001

Submerged Membrane Bio-Reacter(SMBR) process was used to food wastewater treatment. From laboratory pilot-scale experiment data, it was confirmed that this process was very effective process for organics, suspended solid, and N, P treatment. It was found that BOD and COD removal rate were obtained 90% and 92%, respectively, for 150 days operation. Organics loading rate did not affect to the removal efficiency because MLSS concentration in aerobic tank was highly maintained. IN the case of first reactor operated with anoxic and second reactor operated as aerobic, T-N, T-P removal rate were obtained 93% and 95%, respectively. It was shown that removal efficiency could be maintained stable due to the complete removal of SS and sludge production decreased with increasing of sludge retention time.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.114-117
• /
• 2004

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.138-140
• /
• 2008

• 한국수산과학회지
• /
• 제26권5호
• /
• pp.502-509
• /
• 1993

Submerged filter process was used to evaluate the nitrifying efficiency of ammonia in the recycling water of marine aquatic culture system. The ammonia removal efficiency was achieved as high as $99\%$ at the hydraulic surface loading rate of up to $4.3{\ell}/m^2-day$. And the nitrite accumulation did not occur in the reactor even when the hydraulic surface loading rate of up to $36.8{\ell}/m^2day$ was applied. In the present study, the relationship between the effluent ammonia concentration and ammonia surface loading rate was formulated as an equation. The attachment rate of biofilm on the filter media at the ammonia surface loading rate of 62.3 and $311.7mg/m^2day$ was 15 and $55mg/m^2-day$, respectively, showing the linear relationship between the attachment rate and ammonia loading rates. Biofilm thickness and density of the filter media were found to be the function of the ammonia loading rate.

• 한국수자원학회논문집
• /
• 제50권5호
• /
• pp.289-302
• /
• 2017

발산형 바닥 경사 생성항(DFB, Divergence Form for Bed slope source term)을 엄밀하게 유도하였으며, DFB 중에서 격자의 변에서 평균 수심을 이용하는 mDFB의 오차를 명백하게 입증하였다. 또한, DFB 기법은 바닥 경사 생성항에 대해 정확한 방법임을 밝혔다. 완전히 잠기기 않은 격자에 대한 기존의 체적-수심 관계의 오류를 수정하였으며, C-특성의 충족을 위해 완전히 잠기지 않은 변에 대한 처리가 필요함을 검토하였다. 이 연구를 통해 근사 Riemann 해법으로 천수방정식을 해석할 때 보다 정확한 수단을 제공할 수 있을 것으로 기대한다.

• 한국작물학회지
• /
• 제33권4호
• /
• pp.350-352
• /
• 1988

This study was carried out to know the influence of turbidity of submerged water on photosynthetic rate of rice plant after water submerging treatment. Rice plants were transplanted in the pot at maximum tillering stage and they were sumberged for 3days at meiotic stage, 20days after transplanting, in the plastic container which had the clear and turbid water temperature adjusted around 24 to $25^{\circ}C$. Photosynthetic rate at 6 hours recovery after submergence was 41.5 to 54.2% compared to the control, but in the case of cultivar 'Nagdongbyeo', it was rapidly increased by 97.3 to 104.6% in the clear water and by 68.6 to 77.5% in the turbid water at 2 to 4 days recovery after submergence. Photosynthetic rates per plants at 6 hours to 4 days recovery after submergence were 128.3 to 245.5 $C_2$ mg.hr.$^{-1}$, in 'Samgamgbyeo' and 71.1 to 162.4 $CO_2$, mgㆍhr.$^{-1}$ in 'Nagdongbyeo' Photosynthetic rate to respiration ratio of rice plant recovery after submergence was lower compared to control plant and it was lower in 'Nagdongbyeo' than that in 'Samgangbyeo'.ngbyeo' than that in 'Samgangbyeo'.gangbyeo'.pos;.

• 멤브레인
• /
• 제12권2호
• /
• pp.67-74
• /
• 2002

침지형생물막 반응조와 역삼투막을 이용하여 염색폐수를 공업용수로 재이용하기 위한 실험을 수행하였다. 실험실과 현장의 pilot plant 실험 결과 20-25 cmHg의 흡인압력으로 10 LMH($1/m^2$.hr)의 투과유속을 얻었다. 침지형생물막 반응조에서 CODcr, $COD_{Mn}$ 및 T-N의 제거율은 각각 93%, 90%, 60%로 나타났다. 난분해성 물질과 총질소의 제거효율을 높여서 염색폐수를 공업용수로 재이용하기 위한 침지형생물막 반응조와 역삼투막(SMBR+R/0)을 조합한 공정을 수행한 결과, 질소제거율이 80% 이상으로 총질소 농도를 15 mg/L를 얻었다. 조합공정은 염색폐수를 공업용수로 재이용하기에 적합하였다.

• Membrane and Water Treatment
• /
• 제9권4호
• /
• pp.263-271
• /
• 2018

The objective of this work was to analyze organic matter removal, nitrification, biomass growth and membrane fouling in a submerged flat-sheet membrane bioreactor, fed with synthetic wastewater, of similar composition to the effluents generated in a fish meal industry. After biomass acclimatization with saline conditions of 12 gNaCl/L and COD/N ratio of 15 in the bioreactor, results showed that the organic matter removal was higher than 90%, for all organic loading rates (0.8, 1, 1.33 and $2gCOD/L{\cdot}d$) and nitrogen loading rates (0.053, 0.067, 0.089 and $0.133gN/L{\cdot}d$) tested during the study. However, nitrification was only carried out with the lowest OLR ($0.8gCOD/L{\cdot}d$) and NLR ($0.053gN/L{\cdot}d$). An excessive concentration of organic matter in the wastewater appears as a limiting factor to this process' operating conditions, where nitrification values of 65% were reached, including nitrogen assimilation to produce biomass. The analysis of membrane fouling showed that the bio-cake formation at the membrane surface is the most impacting mechanism responsible of this phenomenon and it was demonstrated that organic and nitrogen loading rates variations affected membrane fouling rate.

• Korean Membrane Journal
• /
• 제3권1호
• /
• pp.32-38
• /
• 2001

Using the hollow fiber membrane module in a lab-scale membrane bioreactor, the anoxic- oxic (AO) process for nitrogen removal was operated for about one year. For the influent wastewater containing 1,200-1,400 mg $1^{-1}$ of CODcr and 200-310 mg $1^{-1}$ of nitrogen, this process achieved a high quality effluent of less than 30 mgCOD $liter^{-1}$ and 50 mgN $liter^{-1}$. The removal rate of organics was above 98% at a loading rate larger than 2.5 kgCOD $m^{-3}$$d^{-1}$. When the internal recycle from the oxic to the anoxic reactor changed room 2n to 600% rout the influent flow rate, the nitrogen removal rate increased from about 70 to 90% at a loading rate of 0.4 kgT-N m-s d-1. The initial increase of transmembrane pressure (TMP) was observed after a 4-month operation while maintaining the flux and MLSS concentration at 7-9 1 $m^2$ $h^{-1}$ and 6,000-14,000 mg $1^{-1}$, respectively. The TMP could be maintained below 15 cmHg for an 8-month operation. The chemical cleaning with an acid followed by an immersion in an alkali solution gave better cleaning result with the membrane operated for 10 month rather than that only by an alkali immersion.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.179-189
• /
• 2019

This study aimed to investigate the effect of temperature and solid retention time (SRT) on membrane fouling in a membrane bioreactors (MBRs). For this purpose, a lab-scale submerged MBR system was used. This system operated at two SRTs of 15 and 5 days, three various temperatures (20, 25 and $30^{\circ}C$) and hydraulic retention time (HRT) of 8 h. The results indicated that decreased the cake layer resistance and increased particles size of foulant due to increasing temperature and SRT. Fourier transform infrared (FTIR) analysis show that the cake layer formed on the membrane surface, contained high levels of proteins and especially polysaccharides in extracellular polymeric substances (EPS) but absorbance intensity of EPS functional groups decreased with temperature and SRT. EEM analysis showed that the peak on the range of Ex/Em=220-240/350-400 in SRT of 15 and temperature of $30^{\circ}C$ indicates the presence of fulvic acid in the cake. In addition, as the temperature rise from 20 to $30^{\circ}C$, concentration of soluble microbial products (SMP) increased and COD removal reached 89%. Furthermore, the rate of membrane fouling was found to increase with decreasing temperature and SRT.