• 제목/요약/키워드: Submerged treatment

검색결과 257건 처리시간 0.025초

Characterization of Microbial Community in Biological Wastewater Treatment System Using Respiratory Quinone Profiles

  • Lim Byung-Ran;Ahn Kyu-Hong;Lee Yonghun
    • 한국미생물학회:학술대회논문집
    • /
    • 한국미생물학회 2003년도 International Meeting of the Microbiological Society of Korea
    • /
    • pp.111-114
    • /
    • 2003
  • The dynamics of microbial community structure of the various domestic wastewater treatment processes were examined using a novel approach of quinone profiles. The compositions of microbial quinone of 5 sites fer plant and lab-scale activated sludge were analyzed. More than 14 kinds of quinones were observed in the activated sludges tested in this study. The microbial community structure of the plant activated sludge processes a little differed from that of the lab-scale submerged MBR systems. The dominant quinones were UQ-8, UQ-10 followed $MK-8(H_4)$, MK-7 and MK-6. The molar ratio of ubiquinones to menaquinones (UQ/MK) changed from 0.81 to 1.9, indicating that aerobic bacteria dominated the microbial community of the activated sludge examined. The microbial diversity of the activated sludges calculated from the all quinone compositions was 9.5-11.9 and the microbial equability of the activated sludges was 0.64-0.79.

  • PDF

60kg/mm2급 조질고장력강의 용접입열량에 따른 기계적 특성 변화 (The Change of Mechanical Properties on Weld Heat Input in 60kg/mm2 Quenched and Tempered High Strength Steel)

  • 김은석;박경채;정인상
    • 열처리공학회지
    • /
    • 제7권1호
    • /
    • pp.35-43
    • /
    • 1994
  • For the purpose of studying the change of mechanical properties of weld parts, shielded metal are welding, one-pole and two-pole submerged arc welding were accomplished weldability on $60kg/mm^2$ quenched and tempered high strength steel. Charpy impact values of the weld metal in welded parts by SMAW and SAW were lower than those of the heat affected zone and increased in order of bond, coarsened, refined and carbon spheroidized regions in the heat affected zone. Grain size of prior austenite or M-A constituent did not significantly affect toughness of welded parts, but precipitated carbide films which forms at the grain boundaries or within matrix and volume fraction of pearilte were most important factor for toughness.

  • PDF

배·급수관망에서 생물막 제어 (Control of Biofilms in the Drinking Water Distribution System)

  • 문성민;윤제용
    • 한국물환경학회지
    • /
    • 제23권1호
    • /
    • pp.1-11
    • /
    • 2007
  • The low nutrient environment in drinking water treatment plants and distribution systems cannot to be a good environment for bacterial growth. However, biofilms can be frequently found submerged surface in treatment plants and distribution system. Biofilms in distribution system are harmful, in that they can release organisms, and may cause problems in taste and odor of water. Control of these Biofilms is difficult, and disinfection alone is usually ineffective. Biofilms will not be eliminated from distribution systems by any contemporary technology available now or in the future. Therefore reduction of organic matter, improved disinfection, or a combination of these methods can be useful in controlling distribution system biofilms.

다당류 첨가에 따른 당근박 함유 Leuconostoc citreum S5 발효물의 물성변화 (Effects of Various Polysaccharides on the Physicochemical Properties of the Dextran Culture Containing Carrot Juice Residue Obtained from Submerged Culture Using Leuconostoc citreum S5)

  • 손민정;이삼빈
    • 한국식품영양과학회지
    • /
    • 제38권3호
    • /
    • pp.352-358
    • /
    • 2009
  • Leuconostoc속의 균주와 당근 박을 이용하여 생산된 점 질성의 발효물의 물성을 조절하기 위해서 다양한 다당류의 첨가 및 열처리 전후에 물성변화를 점도계와 조직감 측정으로 평가하였다. 당근 박 첨가농도가 증가함에 따라서 점조도 값은 증가되었으며, 20% 수준으로 첨가하였을 때 점조도 지수는 대조군 18 $Pa{\cdot}s^n$에서 150 $Pa{\cdot}s^n$ 정도로 크게 증가 되었으며, 생균수는 $2.36{\times}10^9$ CFU/mL으로 나타났다. 점질성의 덱스트란 발효물에 다양한 다당류를 첨가한 경우, 대조군의 점조도 값보다 증가되었으며, glucomannan을 첨가했을 때 가장 높은 점조도 값을 나타내었다. 특히 gellan gum을 첨가하여 열처리한 경우에는 발효물의 견고성이 가장 크게 증가되고, 점조도 지수가 높았으며, 혼합발효물이 반고체 상태로 전환되면서 탄성 계수와 점성 계수가 가장 크게 증가 되었다. Carrageenan을 첨가하여 열처리한 경우에도 역시 높은 견고성 값, 점조도 지수 및 높은 탄성 계수를 나타내는 물성을 나타내었으며, xanthan gum과 glucomannan을 첨가한 시료는 비교적 낮은 점성과 탄성의 값을 나타내었다. 따라서 Leuconostoc속의 균주와 당근 박을 이용하여 생산된 점질성 덱스트란 발효물에 첨가되는 수용성 다당류의 종류 및 열처리에 따라서 발효물의 물성 조절이 가능하여 점증제로 활용이 가능할 것으로 기대된다.

The Characteristics with HRT Variation on InSub Pilot Plant for Advanced Sewage Treatment

  • Kang, Jin-Young;Huh, Mock
    • Environmental Engineering Research
    • /
    • 제14권3호
    • /
    • pp.174-179
    • /
    • 2009
  • The InSub system(applied for a patent) was developed, as it combined the indirectly aerated submerged biofiltration(InSub) reactor and Anaerobic/ Anoxic reactor. This system which can eliminate organism and nutrient materials at the same time, which is safe and economical to be maintained and managed is more simple process than the complicated existing biological advanced sewage treatment system. The most suitable HRT of this study showed 9 hours. As looking into the effluent concentration and removal efficiency of each item at 9 hours of HRT, each effluent concentration for $SS,\;BOD5,\;COD_{Mn},\;and\;COD_{Cr}$ was 1.46 mg/L, 7,09 mg/L, 9.84 mg/L and 16.42 mg/L. And their removal efficiency was 96.98%. 90.59%, 77.18% and 83.92%, respectively. Each effluent concentration of T-N and T-P was 10.42 mg/L and 1.04 mg/L. Their removal efficiency was 73.38% and 61.62%, respectively. This pilot plant experiment(the state was without the internal recycling.) followed a variety of HRT. The results confirmed that it was to be advanced sewage treatment system with high efficiency when it combined with the internal recycling.

한국잔디(Zoysia japonica Steud.) 종자의 발아촉진에 관한 연구 (Studies on the Germination Promotion of the Zoysia japonica seeds.)

  • 전우방
    • 아시안잔디학회지
    • /
    • 제1권1호
    • /
    • pp.30-36
    • /
    • 1987
  • In order to promote the germination of Korean lawn grass(Zoysia japonica Steud.) seeds a gravimetric seed selection with a mixed chemical solution and the germination promotion with KOH treatment were studied and following results were obtained. 1. When immersed into methanol(S.G., 0.7) 14 percent of immature seeds were precipitated. 2. With water (S.G., 1.0) 36.5 percent of mature seeds were submerged. 3. On a mixture of carbon tetrachloride (S.G., 1.6) and ethylether (S.G., 0.7) in a ratio of 4:6 the seed selection was most effective. 4. When treated with KOH solution the germination rate was 71.01 percent in contrast to 6.0 percent of germination without the treatment. 5. As for concentration of KQH solution, 15 percent depressed the germination (46.7 %) whereas above 20 % the germination rate was gradually increased (79.32 %) up to 40 percent of concentration where the concentration started to depress germination ratio (77.32 %). 6. Finally, in connection with the duration of KOH treatment, a time lapse of up to 20 minutes depressed the germinating ratio(70.02 %) and 30 minutes to 45 minutes increased this ratio to 94.52 percent. 60 minutes of treatment depressed the germination to 75.62 percent.

  • PDF

고도정수처리 신(新) 공정(PMR)개발 및 처리효율 평가 (Development of a New Advanced Water Treatment Process (PMR) and Assessment of Its Treatment Efficiency)

  • 안효원;노수홍;권오성;박용효;왕창근
    • 멤브레인
    • /
    • 제18권2호
    • /
    • pp.157-167
    • /
    • 2008
  • 수돗물 공급에 있어서의 미량 유기물질 및 맛냄새 제거의 중요도가 높아짐에 따라 오존, GAC 및 PAC 등 고도 정수처리공정의 도입이 지속적으로 증대되고 있다. 하지만, 원수의 수질악화, 새로운 오염물질의 출현 등에 의해 기존의 고도처리공정이 향후에도 충분한 대안이 된다고 확신하기는 어려운 실정이다. 본 연구에서는 고농도의 분말활성탄을 slurry blanket의 형태로 체류시킨다는 새로운 개념의 접촉조를 구상, 막여과조와 연계하여 하나의 공정으로 완성하였다. 한강원수를 대상으로 $80m^3/일$ 규모의 pilot plant를 이용, 유기물질 및 2-MIB, Geosmin에 대한 제거특성을 살펴본 결과 DOC의 경우 운영초기 90% 이상, 안정화된 이후에도 $70{\sim}80%$ 내외의 높은 처리효율을 나타내었으며 2-MIB Geosmin의 경우 검출한계 이하로 제거되었다. 본 공정은 1년 이상의 장기간의 고도처리 효율 검증 및 안정된 PAC 접촉조의 운영방안 등 공정 최적화를 위한 추가적인 연구가 필요한 실정이나 기존의 고도처리에 비해 컴팩트하면서 높은 처리효율을 안정적으로 나타냄으로써 맛냄새물질을 비롯한 미량 오염물질을 제거하기 위한 대안공정으로서의 높은 가능성을 확인하였다.

침적식 부직포 막분리를 이용한 생물학적 폐수처리 (Biological Wastewater Treatment Using Submerged Nonwoven Fabric Separation)

  • 최형섭;문병현;허종수;이홍재
    • 한국환경농학회지
    • /
    • 제16권2호
    • /
    • pp.156-160
    • /
    • 1997
  • 침적식 부직포 막분리와 생물학적처리를 조립한 본 연구시스템을 합성폐수에 적용 실험한 결과 다음과 같은 결론을 얻을 수 있었다. 1. 부직포는 기존 여과막보다 공극이 크므로 부직포 모율을 하루정도 침적한 후 생물여과막이 형성된 후 처리수가 안정됨으로 장치의 설치후 하루이상 경과한 후 가동되어야 한다. 2. 수리학적 체류시간, 부하량등의 변화에도 유기물 제거율은 평균 $COD_{Cr}$ 86.0%, $COD_{Cr}$ 90.0%, BOD 95.2%를 나타내었으며, 유출수 SS은 평균 6.2mg/l이었다. 3. 플럭스는 운전 초기 및 높은 압력에서 감소율이 크게 나타났으며 흡입압 $21{\sim}25cmHg$(약 30kpa)에서 $0.124m^3/m^2day$로 안정되었다. 4. 본 시스템의 단위체적당 처리량을 증가시키기 위한 적정한 부직포막의 선정 및 막면의 증가와 부직포 표면의 생물여과막의 조절을 위한 계속적인 연구가 필요하다고 사료된다.

  • PDF

임플란트 주위염의 치료: 증례보고 (Treatment of Peri-implantitis: Cases Report)

  • 성헌모;김경규
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제35권2호
    • /
    • pp.112-123
    • /
    • 2013
  • This study aims to investigate the clinical outcome following treatment of peri-implantitis lesions. Five subjects with 7 implants were treated with surgical approach. Four subjects with 6 implants were initially treated with non-surgical approach or hygiene control. However, inflammation was not resolved and more bone loss was found. Therefore, surgical treatment was performed. After surgical exposure of the defect, granulation tissue was removed and implant surface was treated using tetracycline and chlorhexidine. Then, the flaps were sutured. The wound healing was performed in a non-submerged mode. The present finding demonstrates stable results without progression of bone loss. In one subject, deep V shaped bone defect was filled with bone substitute (ICB, CanCellous Bone, Rockey Mountain Tissue Bank, USA), and resorbable membrane (Lyoplant$^{(R)}$, B.Braun Aesculap AG, Germany) was placed over the grafted defect and healing abutment was connected. However, the inflammation was not resolved and more bone loss was found. At one month after regenerative surgery, the implant was removed.

$ENVIS^{(R)}$ MEMBRANE SYSTEM (평판형 정밀여과막)의 침지식 수처리 공정 적용에 관한 연구 (Application of $ENVIS^{(R)}$ MEMBRANE SYSTEM (Sumerged flat Sheet MF Membrane))

  • 이영무;장재영
    • 멤브레인
    • /
    • 제15권3호
    • /
    • pp.241-246
    • /
    • 2005
  • 본 연구는 하수 및 오폐수 처리를 위해 침지식 수처리 공정 적용을 위한 평판형 MF막인 $ENVIS^{(R)}$을 이용한 MBR SYSTEM 적용에 관한 연구이다. (주)퓨어엔비텍에서 만든 장치를 이용하여 공장의 오수시설($10\;m^3$/일)과 폐수처리장($30\;m^3$/일) 현장에서 실험을 수행한 결과, 공장 오수처리에 있어 제거율은 각각 SS $99.7\%$, BOD $97.6\%$, COD $96.8\%$였으며, 폐수처리에 있어 제거율은 각각 SS $99.6\%$, BOD $95.6\%$, COD $80.3\%$였다.