• 한국생활과학회지
• /
• 제12권2호
• /
• pp.253-263
• /
• 2003

The purposes of this study were to find out an evaluation scale that could predict wear comfort and to investigate the effect of the skin-contacting fiber type on the subjective sensation and microclimate. Sensorial evaluation was basically followed by the Human Perception Analysis (HPA) interviewing 144 consumers. Sixteen female subjects were participated in the sleeve wear test with and without wearing vapor permeable water repellent outerwear. Experimental sleeves were constructed using the same double knit by turning inside out to control other material effects except the skin-contacting fiber type, hence each different side of double knit, cotton side and the cotton/polypropylene blend side, was next to skin in each trial of the experiment. As results, it was noted that the term representing a combined feeling of thermal and wetness sensation, and muggy appeared to be a powerful language to measure perceptual responses of human subject among five dimensions of evaluation. although the ordinary users did not use the term very often. As for the comfort properties of double knits, it seemed that subjects slightly more preferred polypropylene/cotton blend to cotton as the skin-contacting fiber type when they wore outerwear and their skin were covered with sweat, although the result was rot statistically significant and need to be confirmed under higher work load.

• 한국의류학회지
• /
• 제44권4호
• /
• pp.626-638
• /
• 2020

In this study, protective masks were designed in varying internal volume and analyzed in regards to wearing effect. Masks were measured by surface temperature and subjective wear evaluation. Four experimental masks were created with an increasing distance between the mask center line and nose in increments. The distances were set at 0.0 cm (M0), 2.0 cm (M2), 4.0 cm (M4), and 6.0 cm (M6). The area and volume of each experimental mask was measured and both measurements had a positive correlation with the set distances. Among the experimental masks, M2 was the most breathable. The heat between the face and the mask created by exhalation was able to escape from the mask and provided the highest comfort sensation when worn. Conversely, an internal volume that is too large would decrease its comfort because repetitive breathing deforms the appearance of the mask and adversely affects its fit. Therefore, creating and maintaining the optimal internal volume of the M2 mask is important to achieve maximum thermal sensation and ease of wear.

• 한국의류학회지
• /
• 제15권1호
• /
• pp.61-69
• /
• 1991

In order to investigate the comfort properties of aerobic wear with different materials, the physiological responses, subjective wear sensation and microclimate were measured. The experimental garment were all-in·one type with half·length sleeves made of cotton/ polyurethane and nylon/ polyhrethane fabrics. The conditions of the experimental room were controlled to maintain two type of environ- ments, i.e. $25{\pm}1^{\circ}C$, $60{\pm}5\%$ R. H. and $30{\pm}1^{\circ}C$, $70{\pm}5\%$ R.H., Air velocity was maintained at 0.25 misec all the time. The results are as follows; 1) At $25^{\circ}C$, mean skin temperature and comfort sensation were not significantly different among 2 types of materials. 2) At $30^{\circ}C$, aerobic wear made of cotton/polyurethane fibers showed better pleasant tactile sensation than that of nylon/polyurethane fibers. 3) Under both environmental conditions, microclimate of two types of aerobic wear was not significantly different. 4) Among several aspects of wear sensations, tactile sensation was the most powerful factor to differenciate material differences of aerobic wear.

• 한국의류학회지
• /
• 제36권9호
• /
• pp.928-939
• /
• 2012

This study evaluates wear comforts of water-vapor-permeable (WVP) garments through a measurement of various parameters such as skin and rectal temperatures, microclimate between skin and clothing, sweat rate, and subjective sensations (thermal, wet and comfort sensations) to correlate the physiological responses of the human body with its comfort feeling. Wear comfort during a specific exercise on a treadmill in a climatic chamber (temperature T = $20{\pm}0.5^{\circ}C$ and relative humidity H = $50{\pm}10%$) were studied using eight men wearing seven sportswear outfits (a long sleeve shirts and a long pants) made with seven different WVP fabrics. A comfort sensation was found to be highly correlated with skin T (p<.001), microclimate (T and H) between skin and clothing (p<.001) and sweat rate (p<.05). A regression model correlating comfort sensations and physiological responses obtained from wearer trials could be established: Y = 14.167 - 0.362 ${\times}$ X1 + 0.424 ${\times}$ X2 - 0.238 ${\times}$ X3 - 0.561 ${\times}$ X4 + 0.253 ${\times}$ X5 + 0.214 ${\times}$ X6 - 0.393 ${\times}$ X7 + 0.023 ${\times}$ X8 - 0.043 ${\times}$ X9. (Y = comfort sensation, X1 = forehead skin T, X2 = forearm skin T, X3 = hand skin T, X4 = thigh skin T, X5 = T of chest microclimate, X6 = T of thigh microclimate, X7 = chest sweat rate, X8 = H of back microclimate, X9 = H of thigh microclimate. The regression model obtained in this work can be used by manufacturers to objectively estimate the comfort sensation of sportswear before it is introduced to the consumer market. This study provides salient information to sportswear manufacturers and sportswear consumers.

• 한국의류학회지
• /
• 제20권2호
• /
• pp.362-372
• /
• 1996

Recently, need for the development of the quantification of subjective evaluation is growing for the production of high-touch and high-tech textile products. In this study, Fuzzy theory is utilized for the evaluation of the wear comfort of the various blouses. Result of a new evaluation method and factor scores, validity of the new evalution technique adopted fuzzy theory was crosschecked with the results of fator analysis and factor scores. As results, fuzzy theory was proved to be adequate methodology to objectify the subjective evaluation of the adequacy of clothing which is worn. When DUNCAN'S multiple comparion among median of the fuzzy composite score were compared with the results of factor score, the sensitivity of the test methods tends to increase. Therefore, it is suggested that fuzzy weighted checklist is an alternative evaluation scale for the subjective comparison of the textile products. In addition, individual median of fuzzy composite score value should be treated by statistical for the sensitive analysis of subjective evalution.

• 한국의류학회지
• /
• 제36권3호
• /
• pp.259-268
• /
• 2012

This study suggests quantitative guidelines for inside clothing temperatures to improve the heat tolerance of 20's females in summer. First, the inside clothing temperatures ($T_{cl}$) of each subject was measured in daily use. The subjects were asked to record subjective thermal sensations, clothing items worn, clothing weight, and activities during an experiment designed to determine the comfort zone of $T_{cl}$. In a thermally neutral state, the comfort zone of $T_{cl}$ was decided on a mean value $T_{cl}{\pm}1{\sigma}$. Second, the subjects were asked to wear clothing that would enable them to feel 'slightly warm but still comfortable'. The rest of the processes were the same as previous steps that were designed to understand the way and degree of clothing control. The comfort zone of $T_{cl}$ was decided in the same manner as the previous step. The two comfort zones were combined and named the combined comfort zone of the definitive comfort zone. The results were as follows: 1. Thermally comfortable $T_{cl}$, Hcl were $34.0{\pm}1.1^{\circ}C$, $40{\pm}9%%RH$ and the thermally comfortable ambient climate was $25.0{\pm}1.6^{\circ}C$, $53{\pm}7%$RH. 2. When subjects were asked to wear 'slightly warm but still comfortable', there were difference in thermally comfortable $T_{cl}$, clothing weight and clothing layer by subject. 3. In this study, the optimal $T_{cl}$ was decided on the mid-point of the definitive comfort zone of $T_{cl}$.

• 한국의류학회지
• /
• 제45권2호
• /
• pp.305-316
• /
• 2021

In this study, the effect of wearing functional compression pants is verified using a lower-limb wearable robot through a bio-signal analysis and subjective fit evaluation. First, the compression area to be applied to the functional compression pants is derived using the quad method for nine men in their 20s. Subsequently, functional compression pants are prepared, and changes in Electroencephalogram (EEG) and Electrocardiogram (ECG) signals when wearing the functional compression and normal regular pants inside a wearable robot are measured. The EEG and ECG signals are measured with eyes closed and open. Results indicate that the Relative alpha (RA) and Relative gamma wave (RG) of the EEG signal differ significantly, resulting in increased stability and reduced anxiety and stress when wearing the functional compression pants. Furthermore, the ECG analysis results indicate statistically significant differences in the Low frequency (LF)/High frequency (HF) index, which reflect the overall balance of the autonomic nervous system and can be interpreted as feeling comfortable and balanced when wearing the functional compression pants. Moreover, subjective sense is discovered to be effective in assessing wear fit, ease of movement, skin friction, and wear comfort when wearing the functional compression pants.

• 한국의류학회지
• /
• 제24권5호
• /
• pp.714-723
• /
• 2000

The purpose of this study is to develop functional and sensible brassiere for middle-aged women. As a methodology, engineering design process, especially, QFD(Quality Function Deployment) was adopted to translate consumer's needs into product design parameters. Wearing tests of commercial brassiere were performed for the development o subjective measurement scale. The environmental condition was controlled at 28$\pm$1$^{\circ}C$, 65$\pm$3%RH. As results, subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. Regression equations with the subjective evaluation descriptors were developed for the prediction of wearing comfort of brassiere. (R2=.82) The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap.

• 대한가정학회지
• /
• 제40권3호
• /
• pp.11-20
• /
• 2002

The purposes of this study were to investigate the subjective wearing sensation of sleepwear, and to evaluate the comfort properties of fabrics used in the sleepwear. Design of experimental clothing was pajamas made with four types of woven fabrics: plain weave and satin weave made by cotton and polyester. The comfort properties were evaluated with respect to thermal retention, Qmax, moisture regain, water vapor transmission, and air permeability. The wear trials of experimental clothing were performed in two different environments, single-detached unit($23{\pm}1^{\circ}C$, $45%{\pm}3%$ R.H.) and apartment($27{\pm}1^{\circ}C$, $40{\pm}3%$ R.H), to evaluate microclimate temperature and humidity, and subjective wearing sensation. The results obtained from this study were as follows: 1. There were significant differences between the two environments on the clothing microclimate. 2. In the single detached unit environment, the microclimate temperature who wore cotton sleepwear was significantly higher than that of subjects wore the polyester sleepwear, whereas the microclimate humidity who wore polyester sleepwear was higher than that of subjects wore the polyester sleepwear. 3. In the apartment environment, the microclimate temperature who wore the polyester sleepwear showed higher than that of cotton sleepwear, whereas there was no significant difference between the cotton and polyester sleepwear on the microclimate humidity. 4 There were partially significant differences in subjective wearing sensation according to the fiber md weaving type of sleepwear regardless environment. 5. There were also partially significant correlations among the heat/moisture transmission properties of fabrics, the clothing microclimate and the subjective wearing sensation of sleepwear.

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.343-359
• /
• 2016

Objective:In this study, we designed working clothes for livestock farmers to wear in spring and autumn to improve their work efficiency, conducted a physiological test on their performance, and evaluated their comfort. Background: In recent years, livestock farming in Korea has expanded, yet farmers' safety and sanitation levels remain low in hazardous environments that include organic dust, toxic gas, and heat stress, as well as the risk of accidents. Furthermore, most livestock farmers wear ordinary or dust-resistant clothes that are unsuitable for rearing livestock and compromise their safety and health. Thus, it is important to design specialized working clothes for livestock farmers that are comfortable and that minimize their health and safety risks. Method: To this end, we examined the literature on livestock (poultry, swine, and cattle) farmers' safety and sanitation issues, designed appropriate working clothes, and tested them in terms of sensory feel, physiological response, and subjective comfort. Results: The respondents expressed satisfaction with the new working clothes. The results of a physiological test showed a decline in temperature and humidity inside the clothes, a lower pulse rate, and a lower oxygen intake compared to the measurements taken when famers wore their previous working clothes. This indicates a fall in heat stress and fatigue, which was mostly consistent with the results of the assessment of subjective comfort. Conclusion: The results of the analysis show an improvement in the comfort of the new working clothes compared to the dust-resistant clothes that are widely worn. Based on this study, the new working clothes need to be further tested and evaluated to improve the design. Application: This study is expected to contribute to designing better working clothes for livestock farmers.