• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.15-22
• /
• 2011

The chemistry factor and RTPTS margin for domestic reactor pressure vessel materials were analyzed by using the surveillance data which have been obtained from 8 nuclear power plants in Korea. The surveillance data have been used to assess the integrity of the pressure vessel under the pressurized thermal shock (PTS) event. The chemistry factor, which is determined by the Cu and Ni contents of vessel materials, is considered a proper tool to assess the $RT_{PTS}$. The chemistry factors, which were obtained from the surveillance data of domestic reactor pressure vessels, were investigated and compared with those of Regulatory Guide 1.99 in this study. Regressions for ${\Delta}RT_{NDT}$ were performed to expect the chemistry factor as a function of Cu and Ni, and to estimate $RT_{PTS}$ margin. The margin analysis was performed by comparing the regression graphs and standard deviations with those of Regulatory Guide 1.99. The standard deviations calculated by using the domestic surveillance data for base metal and welds are almost same as the standard deviations which are suggested on Regulatory Guide 1.99, Rev.2.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.176-183
• /
• 2024

Assessing the stability of small fishing vessels is important to prevent capsize accidents in coastal waters that primarily occur on small fishing vessels. However, the regulations regarding stability assessment for small vessels under 24 m are inadequate according to the domestic Fisheries Act. Based on safety standards issued by the Ministry of Oceans and Fisheries in 2022 to enhance safety and welfare, vessels adhering to the enhanced safety standards for standard ship types are required to establish stability regardless of their length. This study aims to utilize these aforementioned standards to assess the stability of vessels under 24 m, investigating the suitability of applying these criteria to these vessels and examining the impact on various small vessels with different superstructures. Initially, a 4.99-ton fishing vessel designed according to the standard ship type was selected as the subject vessel. Compliance with the standards was evaluated based on the initial stability of the vessel using the transverse metacentric height (GM) and transverse restoring moment arm at the limit angle (GZ_α). Additionally, six types of small vessels with identical hull forms and specifications to the subject vessel were further examined using prevalent superstructure designs in small fishing vessels. The stability of the subject small vessel was also assessed. A study of a 4.99-ton standard fishing vessel confirmed that the safety standards for standard fishing vessels with enhanced safety welfare were applicable to small fishing vessels under 4.99-ton class and that the stability of small fishing vessels with superstructure modifications was not significantly changed.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.293-297
• /
• 2019

Quasi-nano-hardness and corrosion behaviors of neutron-irradiated reactor pressure vessel (RPV) steels such as 15Ch2MFA (Ni<0.4, 2.520 n/㎠ (En>1.0 MeV) for 32 days. Quasi-nano-hardnesses of the 15Ch2MFA and 15Cr2NHFA steels were 183.8 and 179.8 Hv, respectively. Their corrosion rates and corrosion potentials were 2.4×10^-4Acm^-2, -515.9 mV_SHE and 6.8×10^-4 Acm^-2, -523.6 mV_SHE in NACE standard TM0284-96 solution at room temperature, respectively. 15Ch2MFA steel showed better quasi-nano-hardness and corrosion resistance than 15Cr2NHFA steel in this test condition.

• Ocean Systems Engineering
• /
• v.10 no.3
• /
• pp.333-357
• /
• 2020

International Maritime Organisation (IMO) regulations insist on reduced emission of CO₂, noxious and other environmentally dangerous gases from ship, which are usually let out while burning fossil fuel for running its propulsive machinery. Contrallability of ship during sailing has a direct implication on its course keeping and changing ability, and tries to have an optimised routing. Bad coursekeeping ability of a ship may lead to frequent use of rudder and resulting changes in the ship's drift angle. Consequently, it increases vessels resistance and also may lead to longer path for its journey due to zigzag movements. These adverse effects on the ship journey obviously lead to the increase in fuel consumption and higher emission. Hence, IMO has made it mandatory to evaluate the manoeuvring qualities of a ship at the designed stage itself. In this paper a numerical horizontal planar motion mechanism is simulated in CFD environment and from the force history, the hydrodynamic derivatives appearing in the manoeuvring equation of motion of a ship are estimated. These derivatives along with propeller thrust and rudder effects are used to simulate different standard manoeuvres of the vessel and check its parameters against the IMO requirements. The present study also simulates these manoeuvres by using numerical free running model for the same ship. The results obtained from both these studies are presented and discussed here.

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.129-137
• /
• 1997

The traditional approaches to determine the flag of convenience and second register of flagging-out in Korea international ship register and investigater and weakness of those approaches are revealed. A realistic approach to determine the paper company of shipping and sub-standard vessel of shipbuilding is suggested by introducing register factors obtained from Norwegian and Denish international ship register experiment for the new register.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.250-256
• /
• 2013

Gasoline generates organic acid and polymer (gum) by hydrocarbon oxidation depending on the storage environment such as temperature and exposure to sunlight, which can cause metal corrosion, rubber and resin degradation and vehicle malfunction caused by accumulation in fuel supply system. The gasoline which has not been used for a long time in bi-fuel (LPG-Gasoline) vehicle causes problems, and low octane number gasoline have evaporated into the field, but the exact cause has not been studied yet. In this study, we suggest a plan of quality management by investigating the gasoline oxidation behavior. In order to investigate the oxidation behavior of gasoline, changes of gasoline properties were analyzed at various storage conditions such as storage time, storage vessel type (vehicle fuel tank, PE vessel and Fe vessel) and storage circumstances (sunlight exposure and open system, etc.). Currently distributing gasoline and bioethanol blended fuel (blended 10%) were stored for 18 weeks in summer season. The sample stored in PE vessel was out of quality standard (octane number, vapor pressure, etc.) due to the evaporation of the high octane number and low boiling point components through the vessel cap and surface. Especially, the sunlight exposure sample stored in PE vessel showed rapid decrease of vapor pressure and increase of gum. Bioethanol blended fuel showed similar results as gasoline.

• Korean Journal of Radiology
• /
• v.22 no.7
• /
• pp.1021-1033
• /
• 2021

Objective: To assess the expression of vascular normalization genes in different molecular subtypes of breast cancer and to determine whether molecular subtypes with a higher vascular normalization gene expression can be identified using dynamic contrast-enhanced (DCE) magnetic resonance imaging (MRI) and intravoxel incoherent motion (IVIM) diffusion-weighted imaging (DWI). Materials and Methods: This prospective study evaluated 306 female (mean age ± standard deviation, 50 ± 10 years), recruited between January 2014 and August 2017, who had de novo breast cancer larger than 1 cm in diameter (308 tumors). DCE MRI followed by IVIM DWI studies using 11 different b-values (0 to 1200 s/mm²) were performed on a 1.5T MRI system. The Tofts model and segmented biexponential IVIM analysis were used. For each tumor, the molecular subtype (according to six [I-VI] subtypes and PAM50 subtypes), expression profile of genes for vascular normalization, pericytes, and normal vascular signatures were determined using freshly frozen tissue. Statistical associations between imaging parameters and molecular subtypes were examined using logistic regression or linear regression with a significance level of p = 0.05. Results: Breast cancer subtypes III and VI and PAM50 subtypes luminal A and normal-like exhibited a higher expression of genes for vascular normalization, pericyte markers, and normal vessel function signature (p < 0.001 for all) compared to other subtypes. Subtypes III and VI and PAM50 subtypes luminal A and normal-like, versus the remaining subtypes, showed significant associations with K^trans, k_ep, v_p, and IAUGC_BN90 on DEC MRI, with relatively smaller values in the former. The subtype grouping was significantly associated with D, with relatively less restricted diffusion in subtypes III and VI and PAM50 subtypes luminal A and normal-like. Conclusion: DCE MRI and IVIM parameters may identify molecular subtypes of breast cancers with a different vascular normalization gene expression.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.454-459
• /
• 2001

The present study is concerned with the flow patterns induced by other impellers in a rectangular tank Impellers are FBT(Flat blade turbine), PBT(Pitched blade turbine), Shroud turbine, Rushton Turbine, and Helical ribbon turbine. The solution of flows in moving reference frames requires the use of 'moving' cell zone. The moving zone approaches are MRF(Multiple reference frame), which is a steady-state approximation and Sliding method, which is a unsteady-state approximation. Numerical results using two moving zone approaches are compared with experiments by Ranade & Joshi, which have done extensive LDA measurements of the flow generated by a standard six-bladed Rushton turbine in a cylindrical baffled vessel. In this paper we simulated the flow patterns with above mentioned moving zone approaches and impellers. Turbulence model is RNG k-$\epsilon$ model.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.195-208
• /
• 2005

The flag State is primarily responsible for implementing international maritime conventions(IMO conventions) and national laws and other standards as far as its own vessels are concerned, on the other hand the port State exercise its rights for the safety and marine environment under international law especially UNCLOS within port and territorial sea. In particular, the port State may take appropriate measures including detention of ships identified as sub-standard vessels which are considered as port State's supplementary role aiming for implementing international and national and regulations. But in the course of implementing port state control, international disputes may happen between port state, coastal state and flag state in spite of making all possible efforts to avoid these disputes. This paper aims to consider legal grounds on port state control(PSC) in international conventions and national laws concerned and deals with contradictions between international and national law arising from exercising PSC by port state control officers(PSCOs).

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.66-77
• /
• 2002

Generally hull insurance is undertaken by mean of a contract of hull insurance. A contract of hul1 insurance here is a contract whereby the insurer undertakes to indemnify the assured against the loss and damage to the vessel mused by maritime perils. A contract of hull insurance is consists of printed main insurance clauses and a clause includes many sub-clauses. Now the Institute Time Clauses-Hulls (hereunder refer to as "English hull insurance clauses"made by the Institute of London Underwriters is much used as the standard from or basic from by many countries ail over the world Now Korean insurance companies hue not made our their own hull insurance clauses, they have just adopted the made-out English hull insurance clauses and the english law and practice to solve the problem related to marine insurance. On the other hand, the United States of America and Japan have made out their own hull insurance clauses based on English hull insurance clauses and used the clauses for many years. Now American is using American Institute Hull Clauses(hereunder refer to as "American hul1 insurance clauses"as its own clauses which was made out by American Institute of Marine Underwriters in 1977 and Japan is also wing its own clauses named Japanese Hull Standard Clauses(hereunder refer to as "Japanese hull clauses") which was made out by japanese Hull Insurance Association in 1990. Therefore the purpose of this study is not only to make a comparative study on English hull insurance clauses 1995, American hull insurance clauses 1977 and Japanese hull clauses l990, but also to supply on some legal materials necessary for Korea to establish and perform our own hull insurance clauses.