• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.2
• /
• pp.100-107
• /
• 2021

An agrivoltaic system (AVS) is a system of innovation that comprises productions of photovoltaic power and agricultural crops on the same area. However, the decline in crop yield will be fatally occurred because the pigments of crop absorbs less light energy under AVS. In addtion, the photosynthetic capacity of crop grown under the partial shading of AVS is not well reported. In this study, the electron transport rate (ETR) and non-photochemical fluorescence quenching (NPQ) of soybean and rice under the AVS in Boseong and Naju was investigated using chlorophyll fluorescence measurement. The ETR value of soybean and rice under AVS were not significantly differed by location. It represents that the photophosphorylation rate of the crops is not critically different. It means that the decreases in total photosynthesis under AVS were mostly affected by the amount of light absorbed by leaves. Under AVS the photosynthesis of crops will be lower than field crops grown in open fields. This is because the crops under AVS observed higher NPQ, which means that the available energy cannot distribute to photophosphorylation reaction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.153-160
• /
• 2021

Nitrous oxide is a global warming substance and is known as the main cause of the destruction of the ozone layer because its global warming effect is 310 times stronger than carbon dioxide, and it takes 120 years to decompose. Therefore, in this study, we investigated the characteristics of NOx emission from N2O reduction by thermal decomposition of N2O. Bunsen premixed flames were adopted as a heat source to form a high-temperature flow field, and the experimental variables were nozzle exit velocity, co-axial velocity, and N2O dilution rate. NO production rates increased with increasing N2O dilution rates, regardless of nozzle exit velocities and co-axial flow rates. For N2O, large quantities were emitted from a stable premixed flame with suppressed combustion instability (Kelvin Helmholtz instability) because the thermal decomposition time is not sufficient with the relatively short residence time of N2O near the flame surface. Thus, to improve the reduction efficiency of N2O, it is considered effective to increase the residence time of N2O by selecting the nozzle exit velocities, where K-H instability is generated and formed a flow structure of toroidal vortex near the flame surface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.1-12
• /
• 2022

Wind tunnel test for a small scale electric ducted fan with a 104mm diameter was conducted to analyze the aerodynamic characteristics when it was used as a propulsion system of tilt-propeller UAV. Experimental conditions were derived from flight conditions of a sub-scaled OPPAV. Forces and moments of the ducted fan model were measured by a 6-axis balance and 3-dimensional wake vectors which could induce an aerodynamic influence in the vehicle were measured by 5-hole probes. Thrust and torque on hover and cruise conditions were measured and analyzed to drive out the operating conditions when it was applied in the sub-scaled OPPAV. On transition conditions, thrust keep its value with tilt angle variation below 40° and increase after that. But, sideforce increase constantly until 75°. The maximum axial velocity in the wake on hover and cruise conditions was around 60m/s and tangential velocity was around 12m/s. The position of the maximum axial velocity and vortex center move off the fan rotation center line as the tilt angle increases.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.1
• /
• pp.7-15
• /
• 2022

Objectives : The purpose of this study is to identify the effect of office workers' stress level and stress vulnerability on heart rate variability (HRV), confirm the significance of objective stress indicators obtained through subjective stress and heart rate variability devices, and examine their effectiveness as an integrated stress measurement tool in community mental health projects. Methods : From June to July in 2020, 929 workers participated in the stress management and mental health promotion project carried out by K hospital, and their recorded database was used for study analysis with their agreements. Multiple linear regression analysis was performed to find out the effects of general stress level, and stress vulnerability on heart rate variability. Results : All general characteristics were found to have a significant effect on SDNN (ln), RMSSD (ln), LF (ln), and HF (ln), but work experience did not significantly affect RMSSD (ln). Stress level and stress vulnerability did not significantly affect heart rate variability, but stress perception, a sub-factor of stress level, was found to have a significant effect on RMSSD (ln) (β=0.118, p=0.023). Conclusions : In this study, stress perception, a sub-factor of stress level, was found to be a factor affecting RMSSD (ln). This indicates an association with the activity of parasympathetic nerves in stressful situations, and more follow-up studies are needed to use it as a direct indicator of chronic stress and integrated stress in the community mental health field.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.73-81
• /
• 2004

To develope of the inexpensive anti-stain chemicals, it was conducted to investigate the inhibitory effectiveness of mycelial growth and anti-mold effectiveness against test fungi causing surface mold of wood, iron corrosivity and hygroscopicity of six fluoride-based chemicals made from industrial by- product.Among the six chemicals. RNF-3 and RNF-4 were the most effective with respect to a mycelial growth control and anti-mold effectiveness. For the wood treatment with these chemicals, the optimum concentration was about 2% and there was no difference in the effectiveness of chemicals between wood species. The wood treated with synthesized chemicals showed a relatively high iron corrosion rate for corrosive F component whereas, in the treatment with RNF-3 and RNF-4, there was no difference from the untreated wood when the concentration was less than 2%. The hygroscopic property of wood was not effected by treatment of these chemicals. To prove the feasibility for practical using of RNF-3 and RNF-4 chemicals, it is necessary to test of anti-mold effectiveness in the sawmill by field test.

• Journal of Space Technology and Applications
• /
• v.1 no.2
• /
• pp.178-198
• /
• 2021

The Solar Space Environment Division of the Korean Society of Space Science (KSSS) has recently conducted a survey among the domestic researchers affiliated with academia, national research institutes, and for-profit institutes of how the data and models in their professional research field are produced, maintained, and utilized. The primary purpose of this survey is to increase the awareness and utilization of the space environment data and models as well as to promote constructive collaborations among the domestic and international researchers. The models and data surveyed are categorized into three sub-fields: the solar and interplanetary space, the (terrestrial) magnetosphere, and the ionosphere and upper atmosphere. The present paper reports the survey results in the "Magnetosphere" category. The survey shows that the domestically produced data in this category are far less than the data produced in other categories. This can be understood in part as follows: Magnetospheric research relies heavily on the in-situ observations but the development and operation of space-hardened satellites require a significant investment. Nevertheless, the recent publications show an increasing trend of research using the data from the ground stations and the recently launched domestic space missions. In the modeling front, there are first-principles physics models covering from the magnetospheric scale to the sub-ion scale and the models geared towards the space weather prediction. The detailed survey results can be accessed from the KSSS website (http://ksss.or.kr/).

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.135-155
• /
• 2022

This study analyzes patent trends by deriving sub-technical fields of Organic Light-Emitting Diodes (OLEDs) industry, and analyzing technology value, originality, and diversity for each sub-technical field. To collect patent data, a set of international patent classification(IPC) codes related to OLED technology was defined, and OLED-related patents applied from 2005 to 2017 were collected using a set of IPC codes. Then, a large number of collected patent documents were classified into 12 major technologies using the Latent Dirichlet Allocation(LDA) topic model and trends for each technology were investigated. Patents related to touch sensor, module, image processing, and circuit driving showed an increasing trend, but virtual reality and user interface recently decreased, and thin film transistor, fingerprint recognition, and optical film showed a continuous trend. To compare the technological value, the number of forward citations, originality, and diversity of patents included in each technology group were investigated. From the results, image processing, user interface(UI) and user experience(UX), module, and adhesive technology with high number of forward citations, originality and diversity showed relatively high technological value. The results provide useful information in the process of establishing a company's technology strategy.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.49-59
• /
• 2022

In this paper, we designed a new enzyme function prediction model PSCREM based on a study that compared and evaluated CNN and LSTM/GRU models, which are the most widely used deep learning models in the field of predicting functions and structures using protein sequences in 2020, under the same conditions. Sequence evolution information was used to preserve detailed patterns which would miss in CNN convolution, and the relationship information between amino acids with functional significance was extracted through overlapping RNNs. It was referenced to feature map production. The RNN family of algorithms used in small CNN-RNN models are LSTM algorithms and GRU algorithms, which are usually stacked two to three times over 100 units, but in this paper, small RNNs consisting of 10 and 20 units are overlapped. The model used the PSSM profile, which is transformed from protein sequence data. The experiment proved 86.4% the performance for the problem of predicting the main classes of enzyme number, and it was confirmed that the performance was 84.4% accurate up to the sub-sub classes of enzyme number. Thus, PSCREM better identifies unique patterns related to protein function through overlapped RNN, and Overlapped RNN is proposed as a novel methodology for protein function and structure prediction extraction.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.137-150
• /
• 2010

Traditionally, like many people in mountain region of the Himalaya, the Lwang communities depend on mix of subsistence agriculture, animal husbandry, and seasonal migrant labor for their livelihoods. These traditional systems are characterized by low productivity, diverse use of available natural resources (largely for home consumption), limited markets, and some aversion for innovation. The potential to generate wealth through commerce has largely been untapped by these mountain residents and thus is undervalued in local and national economies. Introduction of organic tea farming is a part of Lwang community's several initiatives to break the vicious poverty cycle Annapurna Conservation Area Project (ACAP) played facilitating roles in all their efforts since beginning. In five years, the tea plantation emerged as a new means for secured a livelihood. This study aims to analyze the current practices in tea farming both in terms of farm management and soil nutrient status(technical) and the prosperity of the tea farmers (social). The technical aspect covers the soil and tea leaf analysis of various nutrients contents in the soil and tea leaf. Originally, the technical aspect of the study was not planned but later during the consultation with the advisor it was taken into consideration which added value to the research study. The sample were collected from different locations and analyzed on the field itself. The other part of the study i.e. the social aspect was done through questionnaire survey and focus group discussion. the tea farming provided them not only a new opportunity but also earned an identity in the region. This initiative was undertaken as a piloting measure. Now that the tea is in production with processing unit established locally, more serious consideration has to be given for better yield and economic prosperity. This research finding will help the community to analyze their efforts and make correction measures in tea garden management and application of fertilizer. It is also expected to fill up the gaps of knowledge and information required to reduce economic stresses and enhance capacity of farmers to make the tea farming a sustainable and beneficial business. The findings are expected to Sustainability of organic tea farming has direct impacts on biodiversity conservation compared to the other traditional farming practices that are more resource intensive. The study will also contribute to identify key action points required for reducing poverty while conserving environment and enhancing livelihoods