• 한국가시화정보학회지
• /
• 제19권1호
• /
• pp.50-56
• /
• 2021

With the advances in recent nanotechnology, mass transport phenomena have been receiving large attention both in academic researches and industrial applications. Nonetheless, it is not clearly determined which parameters are dominant at nanoscale mass transport. Especially, membrane is a kind of technology that use a selective separation to secure fresh water. The development of great separation membrane and membrane-based separation system is an important way to solve existing water resource problems. In this study, glass fiber-based membranes which are treated by graphene oxide (GO), poly-styrene sulfonate (GOP) and sodium dodecyl sulfate (GPS) were fabricated. Mass transport parameters were investigated in terms of material-specific and structure-specific dominance. The 3D structural information of GO, GOP, and GPS was obtained by using synchrotron X-ray nano tomography. In addition, electrostatic characteristic and water absorption rate of the membranes were investigated. As a result, we calculated internal structural information using Tomadakis-Sotrichos model, and we found that manipulation of surface characteristics can improve spacer arm effect, which means enhancement of water permeability by control length of ligand and surface charge functionality of the membrane.

• 공업화학
• /
• 제16권2호
• /
• pp.296-303
• /
• 2005

PVC와 ABC의 혼합물을 대상으로 혼합비에 따른 공열분해 특성과 CaO와 $Cu_2O$의 첨가효과를 TG와 GC-MS를 이용하여 연구하였다. $500^{\circ}C$의 등온실험에서 ABS의 혼합비율이 증가할수록 스티렌 단량체와 방향족 화합물의 수율은 증가하였으며, BTX 화합물의 최대 수율은 PVC와 ABS의 혼합비가 4:1일 때 16.14% 정도임을 확인하였다. 금속산화물을 첨가한 경우 액상 생성물의 수율은 혼합비 0.4의 CaO를 첨가했을 때 73%와 0.4의 $Cu_2O$를 첨가했을 때 70%인 최대값을 얻을 수 있었으며, 각각 혼합비 0.5인 CaO와 1.0인 $Cu_2O$를 첨가했을 때 기상 생성물에 포함된 염화수소를 완전히 제거할 수 있었다. 본 연구의 실험조건에서는 염화수소를 완전히 제거할 수 있고, 가장 높은 액상 수율을 얻을 수 있는 반응조건은 $500^{\circ}C$에서 혼합비 0.5인 CaO나 혼합비 1.0인 $Cu_2O$를 첨가하는 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.769-776
• /
• 2008

키랄성 말단기의 에폭사이드는 키랄중간체나 여러 출발물질로서 다양하게 이용되기 때문에 그 선택적인 합성법은 매우 유용하다. 본 연구에서는 염화코발트(II), 염화철(III) 및 질산아연(II)을 각각 함유한 키랄 코발트 살렌 촉매를 새로이 합성하고 그 특성을 평가하였다. 질량분석과 EXAF분석을 통하여 형성된 촉매 착체의 구조를 평가하였다. 합성한 촉매는 방향족 에폭사이드인 스타이렌 옥사이드와 페닐글리시딜 에테르의 속도차에 의한 비대칭 가수분해적 고리열림반응과 글리시틸부틸레이트의 합성반응에 적용하여 그 활성과 선택성을 조사하였다. 합성이 용이한 전이금속염함유 살렌착체 촉매는 물을 친핵체로 하는 라세믹 에폭사이드의 고리 열림을 통하여 99%ee 이상을 나타낼 정도의 매우 높은 광학선택성을 보였으며, 적은 양의 첨가로도 높은 활성을 보였다. 본 연구에서 적용한 촉매씨스템은 키랄 에폭사이드 및 1,2-디올 중간체의 제조에 매우 효과적이었다.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.49-53
• /
• 2008

The yellow base polymer light emitting diodes(PLEDs) with double emission and hole blocking layers were prepared to improve the light efficiency. ITO(indium tin oxide) and PEDOT : PSS[poly(3,4-ethylenedioxythiophene) : poly(styrene sulfolnate)] were used as cathode and hole transport materials. The PFO[poly(9,9-dioctylfluorene)] and MEH-PPV[poly(2-methoxy-5(2-ethylhe xoxy)-1,4-phenylenevinyle)] were used as the light emitting host and guest materials, respectively. TPBI[Tpbi1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene] was used as hole blocking layer. To investigate the optimization of device structure, we prepared four kinds of PLED devices with different structures such as single emission layer(PFO : MEH-PPV), two double emission layer(PFO/PFO : MEH-PPV, PFO : MEH-PPV/PFO) and double emission layer with hole blocking layer(PFO/PFO : MEH-PPV/TPBI). The electrical and optical properties of prepared devices were compared. The prepared PLED showed yellow emission color with CIE color coordinates of x = 0.48, y = 0.48 at the applied voltage of 14V. The maximum luminance and current density were found to be about 3920 cd/$m^2$ and 130 mA/$cm^2$ at 14V, respectively for the PLED device with the structure of ITO/PEDOT : PSS/PFO/PFO : MEH-PPV/TPBI/LiF/Al.

• 한국환경농학회지
• /
• 제34권3호
• /
• pp.244-251
• /
• 2015

BACKGROUND: Recent studies have described the importance of bacteria that can degrade polycyclic aromatic hydrocarbons (PAHs). Here we screened bacterial isolates from commercial gasoline for PAH degraders and characterized their ability to degrade PAHs, lipids and proteins as well as their enantioselective epoxide hydrolase activity, salt tolerance, and seawater survival. METHODS AND RESULTS: One hundred two bacteria isolates from commercial gasoline were screened for PAH degraders by adding selected PAHs on to the surface of agar plates by the sublimation method. A clear zone was found only around the colonies of PAH degraders, which accounted for 13 isolates. These were identified as belonging to Bacillus sp., Brevibacterium sp., Micrococcus sp., Corynebacterium sp., Arthrobacter sp., and Gordonia sp. based on 16S rRNA sequences. Six isolates belonging to Corynebacterium sp., 3 of Micrococcus sp., Arthrobacter sp. S49, and Gordonia sp. H37 were lipid degraders. Arthrobacter sp. S49 was the only isolate showing high proteolytic activity. Among the PAH-degrading bacteria, Arthrobacter sp. S49, Brevibacterium sp. S47, Corynebacterium sp. SK20, and Gordonia sp. H37 showed enantioselective epoxide hydrolase activity with biocatalytic resolution of racemic styrene oxide. Among these, highest enantioselective hydrolysis activity was seen in Gordonia sp. H37. An intrinsic resistance to kanamycin was observed in most of the isolates and Corynebacterium sp. SK20 showed resistance to additional antibiotics such as tetracycline, ampicillin, and penicillin. CONCLUSION: Of the 13 PAH-degraders isolated from commercial gasoline, Arthrobacter sp. S49 showed the highest lipid and protein degrading activity along with high active epoxide hydrolase activity, which was the highest in Gordonia sp. H37. Our results suggest that bacteria from commercial gasoline may have the potential to degrade PAHs, lipids, and proteins, and may possess enantioselective epoxide hydrolase activity, high salt tolerance, and growth potential in seawater.

• Bulletin of the Korean Chemical Society
• /
• 제13권2호
• /
• pp.199-207
• /
• 1992

The approximate rates and stoichiometry of the reaction of excess sodium diethyldihydroaluminate (SDDA) with 68 selected organic compounds containing representative functional groups were examined under standard conditions (THF-toluene, $0^{\circ}C$ in order to compare its reducing characteristics with lithium aluminum hydride (LAH), aluminum hydride, and diisobutylaluminum hydride (DIBAH) previously examined, and enlarge the scope of its applicability as a reducing agent. Alcohols, phenol, thiols and amines evolve hydrogen rapidly and quantitatively. Aldehydes and ketones of diverse structure are reduced rapidly to the corresponding alcohols. Reduction of norcamphor gives 11% exo-and 89% endo-norborneol. Conjugated aldehydes such as cinnamaldehyde are rapidly and cleanly reduced to the corresponding allylic alcohols. p-Benzoquinone is mainly reduced to hydroquinone. Hexanoic acid and benzoic acid liberate hydrogen rapidly and quantitatively, however reduction proceeds very slowly. Acid chlorides and esters tested are all reduced rapidly to the corresponding alcohols. However cyclic acid anhydrides such as succinic anhydride are reduced to the lactone stage rapidly, but very slowly thereafter. Although alkyl chlorides are reduced very slowly alkyl bromides, alkyl iodides and epoxides are reduced rapidly with an uptake of 1 equiv of hydride. Styrene oxide is reduced to give 1-phenylethanol quantitatively. Primary amides are reduced very slowly; however, tertiary amides take up 1 equiv of hydride rapidly. Tertiary amides could be reduced to the corresponding aldehydes in very good yield ( > 90%) by reacting with equimolar SDDA at room temperature. Hexanenitrile is reduced moderately accompanying 0.6 equiv of hydrogen evolution, however the reduction of benzonitrile proceeds rapidly to the imine stage and very slowly thereafter. Benzonitrile was reduced to give 90% yield of benzaldehyde by reaction with 1.1 equiv of hydride. Nitro compounds, azobenzene and azoxybenzene are reduced moderately at $0^{\circ}C$, but nitrobenzene is rapidly reduced to hydrazobenzene stage at room temperature. Cyclohexanone oxime is reduced to the hydroxylamine stage in 12 h and no further reaction is apparent. Pyridine is reduced sluggishly at $0^{\circ}C$, but moderately at room temperature to 1,2-dihydropyridine stage in 6 h; however further reaction is very slow. Disulfides and sulfoxides are reduced rapidly, whereas sulfide, sulfone, sulfonic acid and sulfonate are inert under these reaction conditions.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.155-159
• /
• 2005

패턴화된 ITO/Glass 기판위에 정공수송층으로 PEDOT:PSS (poly(3,4-ethylenedioxythi-ophene)poly (styerne sulfolnate))를 발광층으로 MEH-PPV (poly(2-methoxy-5-(2-ethyhexoxy)-1,4-phenylenvinylene))을 사용하여 스핀코팅법으로 ITO/PEDOT:PSS/MEH-PPV/Al 구조의 고분자 유기전계 발광소자 (polymer light emitting diode, PLED)를 제작하였다. MEH-PPV 용액의 농도(0.1, 0.3, 0.5, 0.7, 0.9, 1.5 wt$\%$)변화를 변수로 하여 제작된 PLED소자의 전기$\cdot$광학적 특성 변화를 조사하였다. MEH-PPV의 농도가 $0.5{\~}0.9 wt\%$에서 가장 양호한 전기-광학 특성을 보여 주었다. 한편 $1.5 wt\%$의 고동도의 MEH-PPV를 갖는 PLED 소자에서는 전류와 휘도 값이 크게 감소하였다. 즉, MEH-PPV의 농도가 $0.5 wt\%$일 때 9V 전압 인가시 최고 발광 휘도와 효율은 $409 cd/m^2$와 4.90 lm/W를 각각 나타내었다. PLED 소자의 발광 스펙트럼은 $560{\~}585 nm$ 파장을 갖는 오렌지 계열의 발광을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.388-388
• /
• 2016

Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.