• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.134-138
• /
• 2003

본 연구는 언어학의 학파를 떠나 주목받고 있는 논항변이의 현상을 통사 ㆍ 의미론적으로 분석하고자 하였다. 논항변이의 현상을 동사의 특성에 따라 분류한 Levin(1993)을 기초로 Dowty의 의미론적인 해석을 시도하였다. 통사적으로 동일한 구조를 보이는 문장에서 동사의 논항이 바뀌면 의미의 변화가 있는 경우가 연구의 초점이 되고 있다. 의미변화가 초래됨을 기초로 각 동사의 유형을 통사적으로 분류하는데 그치지 않고, 그 부류의 문장들의 의미가 어떠한 영향을 받게 되는가를 고찰하였다. 우선 논항변이 현상을 보이는 동사를 Touch형, Hit형 Cut형, 그리고 Break형 동사로 분류하고 각 동사가 보이는 논항변이 현상에 따라 Middle alternation, Body-part possessor Ascension, Conative Alternation에 각각 어떻게 나타나는지를 점검한다. 이러한 분류에 기초하여 각각의 alternation에 의미론적인 해석을 하고자 시도한 것이다.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.15-21
• /
• 2010

A differential case equipped with LSD(limited slip differential) has several advantages over a normal type for rear wheel drive vehicles. Specially, the torque distribution can be done between left and right drive wheel in the state of limited slip differential. Also although LSD types are very various according to operating type, medium and torque distribution, a multi-clutch type is generally applied to rear wheel drive vehicles. So, this study presents the analysis of design parameters for development of a friction plate for multi-clutch type LSD using vehicle road test, the simulation of analytical model and the development of vehicle dynamics model by a benchmark product. According to this investigation, the design parameters which are pre-load of coil spring, friction plate and contact area quantity, friction coefficient and TBR(torque bias ratio) for a friction plate are derived from experiment and simulation and consequently, vehicle dynamics model has been constructed for the development of friction plate for multi-clutch type LSD.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.95-101
• /
• 2012

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. The canned type electric water pump without mechanical sealing elements was selected to meet the requirements for operational reliability and life. However, the electric water pump for internal combustion engine generates much more heat loss than for hybrid electric vehicle since it is operated by the electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump as an inverter integrated water pump has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of $125^{\circ}C$, water pump speed of 6000 rpm, coolant temperature of $106^{\circ}C$ and coolant flow rate of 120 L/min was used as a standard condition. Therefore, flow fields and temperature distribution inside the water pump were obtained. Also, we checked the feasibility of the canned type for the electric water pump in comparison with the mechanical seal type.

• 대한의생명과학회지
• /
• 제25권4호
• /
• pp.357-366
• /
• 2019

This study is to identify how the social support influences the impaired fasting glucose and type 2 diabetes as structural equation analysis reflects the health behavior and psychological path. It investigates participants who give consents to participate in the Korean Health Examine Cohort (KOEX), which collects surveys and biological samples at eight university hospitals nationwide. Of the 53,767 adults over 30 years of age enrolled in the 2nd to 7th KOEX study from 2004 to 2010 (1st to 7th), 18,618 participants with a history of chronic diseases related to type 2 diabetes, the main variable, were excluded. The number of participants were 34,316 with enough data on social support and diabetes, which are the main variables. The results show that social support affects health behaviors and lowers fasting blood sugar. Therefore, not only the management of risk factors of individuals, but also the practice of healthy behavior with the attention of social relations such as social support, etc., can prevent type 2 diabetes.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.176-181
• /
• 2007

This study aims to evaluate theoretically heat transfer characteristics and heat flux performance in ondol system of dried type is composed of panel of ceramics to improve of thermal conductivity and fin to expand heat. To this end, we analyzed effect of design factors(temperature of hot water, set temperature of room and thermal conductivity of finishing materials) in ondol system of dried type by heat transfer analysis. The main results of this study are summarized as follows; The deviation of heat flux and temperature was reduced by heat expansion from fin decreasing heat loss generated in air layer. The temperature and heat flux in upper finishing materials surface linearly increased according to temperature increment of hot water, but the temperature distribution in upper surface was assessed uneven. The greater heat resistance value of upper finishing materials, the deviation of maximum temperature and minimum temperature was decreased. Also, we suggested a basic design data about ondol system of dried type through an analysis of simulation results on heat transfer characteristics and heat flux performance.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.26-31
• /
• 2023

In this study, in order to propose a modular method for type IV high aspect ratio modular hydrogen storage vessel, a numerical analysis was conducted on the heat transfer behavior in series and parallel connection methods, and the differences according to each connection method were reviewed. Computational fluid dynamics software was used to check the internal temperature and pressure values of the hydrogen storage container under charging conditions. In terms of thermal safety when charging hydrogen gas, it was confirmed that the parallel modularization method was superior.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.111-115
• /
• 2011

The purpose of this study was the analysis of electric energy consumption with the case study of tower type apartment's opening of building surface. We analyze the relationship between tower type apartment's opening of building surface and using electric energy consumption. The results of this study are: 1) The highest energy consumption of electric energy was on August without any influence of opening types of building surface. 2) Also, the south-west sides consumption of August was 848 kWh on Type B(one side opening) and it was the highest usage. 3) A house if facing west used more electricity than facing east when its opening of building surface's datum level is facing south. However, the house of facing east used more power than west when its opening of building surface's datum level is facing north. 4) When opening of building surface is facing on north-west or north-east, the opening of building surface's side of west and east used more electric power than north-west or north-east sides.

• 한국치위생학회지
• /
• 제14권5호
• /
• pp.689-694
• /
• 2014

Objectives : The study aims to verify the relationship between personality type and sense of vocation of the clinical dental hygienist. Methods : The study data was collected from 221 dental hygienists working in the City of Changwon(unified), Busan Gyeongsangnam-do. Data analysis was conducted using IBM SPSS Statistics 19.0 program. Results : The relationship between the general characteristics of the study population and a sense of vocation was higher for the dental hygienists with a higher level of education attainment, higher monthly salary, higher job satisfaction level, extroverted personality, and the dental hygienists in a low neurotic group(p<0.001). According to the correlation results among job satisfaction, personality type and the sense of vocation, a sense of vocation and job satisfaction have a positive correlation while the sense of vocation and neurotic tendency have a negative correlation(p<0.01). The results of logistic-regression analysis on the factors influencing the sense of vocation are as follows: education attainment(p<0.001), salary(p<0.05), extroversion(p<0.001) and neurotic tendency(p<0.05). Conclusions : Nature of consciousness, depending on the type of professional vocation was to determine the difference.

• 대한간호학회지
• /
• 제30권3호
• /
• pp.584-594
• /
• 2000

The purpose of this study was to identify emotional responses, of stroke patients using Q analysis. From the data analysis, five types of emotional responses in stroke patients were classified as follows. 1. Acceptance and Overcoming : They attached to life strongly and had self-confidence of recovery. They were striving against their situation through using anything else good for their recovery. 2. Anger Type : They recognized a labile feeling and were angered easily. They had a self-confident and self-esteemed personality before they had a stroke. 3. Conflict Type : They wanted interaction with others. This individual recognized that no one knows their agonies. They were thankful to god or their family, while they could not control their minds. Their family supports were low. 4. Deficiency of self-esteem Type : They had a self-confidence of recovery, but they were in fear of interaction with others. Especially, they were ashamed of themselves. They have a high sense of responsibility and nigh self-esteem for themselves before they had a stroke. 5. Despair Type. : They were sorry to trouble their family. They felt depression, anxiety, darkness, uselessness of themselves, and they wanted to die. They recognized financial burden. for their family. The characteristics of the five types of stroke patient identified in this study will be used to assess emotional nursing needs for stroke patients. The findings of this study will provide practical guidelines for developing nursing interventions for stroke patients based on the characteristics of subjectivity types.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.54-61
• /
• 2012

The aim of this study is to understand the plan characteristics used in unit floor planning mainly with examples of mixed-use residential tall buildings. The study will extract plan characteristics mainly using the graph expressive technique with essential information of the zoning function of residential space, rather than merely analyzing the various construction floor plans by type. The research method involves studying a group of 50-story buildings (over 200 meters) which were built between 2002 and 2008. Among 6 high-rise residential buildings case, we extract the most preferred type from 34 types, And then we simply classify rooms in 3 zoning, the master, living and children's zones. Finally we analyze the correlation among 3 simple zone and then extract some model type. The results of this study revealed three main findings. First, using the 3 functional zones, the shape of the main building and the unit floor plan can be analyzed simply even when they appear to be complicated. Second, we can extract common features when we analyze the unit floor plan from the viewpoint of the penetrability among 3 zoning. Third, we can extract 2 types when we analyze the unit floor plan from the viewpoint of 3 connected functional zoning concepts.