• Journal of Advanced Marine Engineering and Technology
• /
• 제21권1호
• /
• pp.49-58
• /
• 1997

The membrane type LNG tank is non self-supporting tank which consists of both primary and secondary membrane supported through the insulation boxes by the adjacent hull struc¬ture. Although the membranes are not structural member. They are subject to periodical cyclic loads due to the thermal expansion and other expansions or contraction of membrane. At the design stage of the tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds is necessary in order to assist the designer and the inpector. In this study the evaluation method of fatigue strength of membrane type LNG tank is pre¬sented with FEM analysis and fatigue test of lap welds and it contains the following:1) The fatigue tests and preparation of design S - N curve for lap welds 2) FEM analysis of test specimens 3) Estimation of cumulative damage factor of lap welds 4) Guideline for inspection of lap welds of membrane type LNG tank As the results of analytical and experimental approaches in this study, the evaluation method of fatigue strengths of membrane type LNG tank is proposed, which is expected to be useful for design and inspection of membrane type LNG tank.

• 한국생활과학회지
• /
• 제20권4호
• /
• pp.831-847
• /
• 2011

This study investigated the factors that influence child care expenses and the type of child care services used by preschool children. Data for this study was obtained from a questionnaire completed by mothers of preschool children during the spring of 2009. The data was analyzed by the following methods: $X^2$, ANOVA, multinominal logit analysis, and multiple regression analysis. The results of this study showed the significant factors that affected the types of child care services used by preschool children. These factors were the child's age, child's sex, mother's age, mother's educational level, mother's employment status, family income, type of residence, residential area, and family type. Monthly child care expenses for one child was an average of 374,000 won and it accounted for about 9 percent of their family income. The significant factors that affect child care expenses were the mother's educational level, the mother's employment status, the number of preschool children, family income, residential area, family type and the type of child care services.

• 한국농촌건축학회논문집
• /
• 제18권2호
• /
• pp.19-27
• /
• 2016

This study typified the rural centers with myeon locations in Hwasun-gun which showed comprehensive and various class types through settlement class structure analysis. It is also for establishing the awareness of strengthening functions and facilities of the centers and the directions of strengthening it. Subjects of the study could be classified into three types including base type (Neungju-myeon), general type (Nam-myeon) and decline type (Dongbok-myeon) through the analysis of settlement class structure. Neungju-myeon location as the base type could function as the myeon location by itself and tended to serve education, health and welfare functions through the strengthening of central living functions. Nam-myeon location as the general type required sports facilities management based on the vicinity and accessibility to the senior's welfare functions. Dongbok-myeon location as the decline type required the accessibility to public health facilities and the security of vicinity to the facilities because of its high population of the aged.

• 한국실내디자인학회논문집
• /
• 제24권1호
• /
• pp.169-177
• /
• 2015

The study aimed to classify the types of domestic dormitory furniture, and analyze the characteristics of each furniture type based on the empirical research methodology. The study consisted of literature review and field visit followed by survey and in-depth interview. The researchers collected 140 images of furniture from the web sites of 87 universities. Using affinity diagram, the dormitory furniture was classified into four different types: single fixed type, single semi-fixed type, multi fixed type, and multi semi-fixed type. The finding showed that the use of single fixed type was dominant in the domestic dormitory room, which had competitive price and easy maintenance. Both single fixed type and multi fixed type turned out to be lack of storage space. Meanwhile, both single semi-fixed type and multi semi-fixed type got the high value on the space efficiency due to the multi function. However, these two types could only be applied to a wide space enough for the furniture to be transformed and extended. The study analyzed the main characteristics of the dormitory furniture according to the type classification, and it is expected that this empirical study could work as a medium and database for the upcoming dormitory furniture design studies.

• 대한영양사협회학술지
• /
• 제24권3호
• /
• pp.212-230
• /
• 2018

The purpose of this study was to investigate the effects of job stress on job satisfaction according to interpersonal relationship type among school dieticians and nutrition teachers. The online survey was conducted from Oct. 26th to Nov. 7th, 2017 in 2,000 randomly selected dieticians and nutrition teachers in the capital area. A total of 453 collected questionnaires were used for analysis. SPSS v.21.0 Statistical Package Program was used for the statistical process. For the results regarding interpersonal relationship type of dieticians, open-type (73.3%) was the highest, followed by self-assertive-type (23.0%), isolated-type (2.6%), and careful-type (1.1%). Regarding overall job satisfaction, 'human relation' was the highest, followed by 'job itself', 'working environment', and 'personal rating & welfare system', in that order. According to interpersonal relationship type, in the case of 'open-type' or 'careful-type', job satisfaction was relatively high. Regarding overall job stress, 'job demand' was the highest, followed by 'lack of reward', 'organizational system', 'interpersonal conflict', 'occupational climate', 'job insecurity', and 'insufficient job control', in that order. In accordance with interpersonal relationship type, overall job stress index was high in terms of 'self-assertive-type' or 'careful-type'. For the results of analyzing the correlation between job satisfaction and job stress index, all areas showed statistically significant negative correlations. Multiple regression analysis was performed to study the effects of job stress on job satisfaction mediating interpersonal relationship type. Job stress had different effects on job satisfaction in terms of 'open-type' and 'self-assertive type'. In conclusion, different strategies are needed for dieticians with different interpersonal relationship types to improve job satisfaction and to reduce job stress.

• 한국환경복원기술학회지
• /
• 제25권4호
• /
• pp.15-31
• /
• 2022

The Green Purification Unit System (GPUS) is a green infrastructure facility applicable to the roadside to reduce particulate matter from road traffic. This study introduces two types of GPUS (type1 and type2) and assesses the performance and maintenance costs of each of them. The GPUS's performance analysis used the data collected in November 2021 after the installation of the GPUS type1 and type2 at the study site in Suwon. The changes in the particulate matter concentration near the GPUS were measured. The maintenance cost of GPUS type1 and type2 was assessed by calculating the initial installation cost and the management and repair cost after installation. The results of the performance analysis showed that the GPUS type1, which was manufactured by combining plants and electric dust collectors, had a superior particulate matter reduction performance. In particular, type1 produced a greater effect of particulate matter reduction in the time with a high concentration (50㎍/m³ or higher) of particulate matter due to the operation of electric dust collectors. GPUS type2, which was designed in the form of a plant wall without applying an electric dust collector, showed lower reduction performance than type1 but showed sufficiently improved performance compared to the existing band green area. Meanwhile, the GPUS type1 had three times higher costs for the initial installation than GPUS type2. In terms of costs for managing and repairing, it was evaluated that type1 would be slightly more costly than type2. Finally, this study discussed the applicability of two types of GPUS based on the result of the analysis of their particulate matter performance and maintenance cost at the same time. Since GPUS type2 has a cheaper cost than type1, it could be more economical. However, in the area suffering a high concentration of particulate matter, GPUS type1 would be more effective than type2. Therefore, the choice of GPUS types should rely on the status of particulate matter concentration in the area where GPUS is being installed.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.475-478
• /
• 2003

This study was conducted to compare the design rainfall derived by the at-site and regional frequency analysis based on the regionalization of the precipitation. The regional and at-site design rainfalls were calculated by Log-Pearson type III distribution using Indirect Methods of Moments(WRC). The regional and at-site analysis for the design rainfall were tested by Monte Carlo simulation. Relative root-mean-square error(RRMSE), Relative bias(RBIAS) and Relative reduction(RR) in RRMSE were computed and compared between design rainfalls resulted from observed and simulated data using the regional and at-site analysis. It was shown that the regional analysis procedure can substantially reduce the RRMSE, RBIAS in comparison with those of at-site analysis. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• 전기전자학회논문지
• /
• 제2권1호
• /
• pp.160-165
• /
• 1998

본 연구에서는 2차원 자계 해석 프로그램을 이용하여 평판형 브러시레스 직류 전동기의 자계 해석을 위한 방법을 제시하였다. 정확한 자계 해석을 위해서는 3차원 자계 해석이 필요하지만 많은 시간 및 비용이 요구되는 단점이 있다. 따라서 본 연구에서는 자계 해석을 위하여 3차원 문제를 해당 자석의 평균 반지름에 대한 원통방향의 단면으로 해석하여 2차원 경계치 문제로 축소시켰다. 본 방법을 이용할 경우 시스템의 크기 및 형태에 관계없이 정확한 2차원 자계해석 결과가 합리적으로 얻어지게 된다.

• 한국의류학회지
• /
• 제20권2호
• /
• pp.373-389
• /
• 1996

The purpose of this study was to classify the somatotype based on the side view and to analyze the characteristics of each somatotype. The subjects were 201 middle-aged women aged from 35 to 54. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis, analysis of variance, and discriminant analysis. As the result of factor analysis for the classification of somatotypes, 6 factors which explain 80.8% of variance were extracted from 35 photometric measurement. Using factor scores cluster analysis was carried out and the subjects were classified into 4 cluster Each cluster was classified as straight type, turning over type, bending type and swayback according to its position to the relative plumb line and their side view contour. And 4 somatotypes were analyzed by theirs direct anthropometric and indirect Photometric measurment to represent physical characteristics of each group.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.122-127
• /
• 2011

In this study, it was compared collecting performance according to contact types between heatpipe and manifold of vacuum tube type solar collector. Between two types, direct contact type is better in collecting performance. On the other hand, Indirect type have advantage in maintenance. In the result of numerical analysis, As the temperature of heatpipe and flow rate of working fluid increased, difference of outlet mean temperature of two types became large. Also, it could be confirmed, as contact resistance between heatpipe and copper tube in indirect type increased, the difference increased too. Useful data in selection and design in vacuum tube type solar collector were proposed by the results of numerical analysis.