• (The) Research of the performance art and culture
• /
• no.20
• /
• pp.251-307
• /
• 2010

Manbojeonseo, a kind of an encyclopedia published several times in Ming Ch'ing dynasty, includes useful information for scholars and common people on daily lives. In 1720, Manbojeonseo was first introduced to Joseon(朝鮮) dynasty by the diplomatic corps visiting Ch'ing dynasty, and widely circulated in the society as an useful information magazine or an individual collection of reference book. Since Manbojeonseo includes the systematically-organized contents of Geumdoron(琴道論, a theory of a heptachord), it could provide a useful reference when the Geumdoron was inserted as the contents of old scores. For an instance, Obultan(五不彈), Tangeumsuji(彈琴須知), and Taeeumgibeop(太音紀法) recorded in Hangeumsinbo(韓琴新譜, 1724) clearly acknowledge Manbojeonseo as their common source. In this paper, the order and the contents of Geumdorons from four different Manbojeonseo are compared. At first, the comparative analysis of Manbojeonseo (1610) edited by Seo Giryong(徐企龍) and Manbojeonseo(1612) edited by Yu Jamyeong(劉子明) are carried out focusing on the contents of the Geumdoron, where both Manbojeonseos contain considerable amount of Geumdoron sections. The tables of the contents in both Manbojeonseos are composed of upper and lower levels classified into 4 large divisions for each. While the contents of the upper level is presumably older and focused more on the theory of the cardinal virtues, the contents of the lower one is relatively new and centered more on the skills for the real play of a heptachord(琴), the lyrics and the musical scores composed of Gamjabo(減字譜). Therefore, it could be said that the upper level is metaphysical while the lower level is physical. One of the differences between those two Manbojeonseos lies in the order and the terminology found in the large divisions. In the case of Manbojeonseo(1612), some terms in the large division represent and theoretically group the detailed descriptions in the small divisions such as 5 demands or 7 taboos in the play of the heptachord. In addition, a few lower divisions were newly added or revised in order to enhance the completeness of Geumhangmun(琴學門, study of a heptachord), and the detailed classification was revised and polished to improve the reasonableness. In Manbojeonseo(1614) composed by the same editor as Manbojeonseo(1610), the contents of the Geumdoron become much briefer than those of Manbojeonseo(1610) and Manbojeonseo(1612). In the case of Manbojeonseo(1739), a new type of the Geumdoron is included called Oeumjeongjobo(五音正操譜) while carrying a similarly brief section of the Geumdoron. Finally, the Geumdorons in Manbojeonseo and several old scores are comparatively analyzed. While the Geumbo(琴譜) owned by Gugagwon(國樂院) and Hangeumsinbo contains relatively old Geumdoron, Yuyeji(遊藝志) and Bangsanhanssigeumbo(芳山韓氏琴譜) adopt practical and relatively new Geumdorons different from the former old scores and similar to Manbojeonseo(1739) considering the order and the contents. In particular, the contents of the Geumdoron in Geumheonakbo(琴軒樂譜) is notably unique containing much of the upper and the lower levels of Manbojeonseo(1612), therefore thought to have actively adopted the contents of new Geumdorons.

• Korean Journal of Breeding Science
• /
• v.43 no.1
• /
• pp.68-80
• /
• 2011

This study was conducted to investigate characteristics and variations of rice panicle traits for breeding temperate japonica varieties adapted to tropical environment. Eleven panicle traits were investigated from nine Korean rice varieties cultivated in Korea and wet season of the Philippines. Tested cultivars were composed of six temperate japonica varieties, three Tongil-type varieties, and one indica variety bred in the Philippines. The number of spikelets on secondary rachis branches (SRBs) was the most variable trait in both environments, while the mean number of spikelets on a primary rachis branch (PRB) was the least variable. Compared with PRB-related traits, SRB traits showed higher correlation with the number of spikelets per panicle. Compared with the plants grown in Korea, the number of spikelets on SRBs, the number of SRBs, spikelets, and rachis branches per panicle were decreased more than other traits in the Philippines. According to path analysis, the number of spikelets on SRBs per panicle affects the number of spikelets per panicle more than the number of spikelets on PRBs per panicle. Climatic factors such as growth duration, cumulative mean temperature, and integrated solar radiation were highly correlated with the relative rate of number of spikelets per panicle. To breed temperate japonica rice varieties adapted to tropical environment, it would be important to select lines which maintain proper growth duration and spikelets on SRBs in target region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.211-218
• /
• 2019

Purpose: The purpose of the present study was to compare the accuracy of four different metal copings fabricated by CAD/CAM technology and to evaluate clinical effectiveness. Materials and methods: Composite resin tooth of the maxillary central incisor was prepared for a metal ceramic crown and duplicated metal die was fabricated. Then scan the metal die for 12 times to obtain STL files using a confocal microscopy type oral scanner. Metal copings with a thickness of 0.5 mm and a cement space of $50{\mu}m$ were designed on a CAD program. The Co-Cr metal copings were fabricated by the following four methods: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). Silicone replica technique was used to measure marginal and internal discrepancies. The data was statistically analyzed with One-way analysis of variance and appropriate post hoc test (Scheffe test) (${\alpha}=.05$). Results: Mean marginal discrepancy was significantly smaller in the Group WM ($27.66{\pm}9.85{\mu}m$) and Group MS ($28.88{\pm}10.13{\mu}m$) than in the Group RP ($38.09{\pm}11.14{\mu}m$). Mean cervical discrepancy was significantly smaller in the Group MS than in the Group RP. Mean axial discrepancy was significantly smaller in the Group WM and Group MS then in the Group RP and Group SLM. Mean incisal discrepancies was significantly smaller in the Group RP than in all other groups. Conclusion: The marginal and axial discrepancies of the Co-Cr coping fabricated by the Wax pattern milling and Milling/Sintering method were better than those of the other groups. The marginal, cervical and axial fit of Co-Cr copings in all groups are within a clinically acceptable range.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.573-579
• /
• 2019

The purpose of this study is predicted easily the entrance surface dose (ESD) in chest digital radiography. We used two detector type such as flat-panel detector (FP) and IP (Imaging plate detector). ESD was measured at each exposure condition combined tube voltage with tube current using dosimeter, after attaching on human phantom, it was repeated 3 times. Phantom images were evaluated independently by three chest radiologists after blinding image. Dose-area product (DAP) or exposure index (EI) was checked by Digital Imaging and Communications in Medicine (DICOM) header on phantom images. Statistical analysis was performed by the linear regression using SPSS ver. 19.0. ESD was significant difference between FP and IP($85.7{\mu}Gy$ vs. $124.6{\mu}Gy$, p=0.017). ESD was positively correlated with image quality in FP as well as IP. In FP, adjusted R square was 0.978 (97.8%) and linear regression model was $ESD=0.407+68.810{\times}DAP$. DAP was 4.781 by calculating the $DAP=0.021+0.014{\times}340{\mu}Gy$. In IP, adjusted R square was 0.645 (64.5%) and linear regression model was $ESD=-63.339+0.188{\times}EI$. EI was 1748.97 by calculating the $EI=565.431+3.481{\times}340{\mu}Gy$. In chest digital radiography, the ESD can be easily predicted by the DICOM header information.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.91-120
• /
• 2004

The Yan mountain area of the northern part of Hebei province and its local neighbor area is categorized main-distribution area of the northern bronze culture of the Eastern Zhou period(770bc~221bc). Recently, it was discovered the concrete character of the culture by a large scale excavation of the Yuhuangmiao cemetery at Jundu mountain. In the chinese scholarship, the cultural character of this area has established the independent cultural type that is distinguished from the Bronze culture of existing. In this paper, I have as a target of analysis remains relate to the Yuhuangmiao culture of the mountain area of northern Hebei in the Eastern Zhou period. And I would like to judge about diverse infuluential relationships of the character of the Yuhuangmiao curture and the Bronze culture, especially burials, burial customs and the characters of the excavated article. In particular, diverse infuluential relationships of the upper Xiajiadian culture Ordos bronze culture and The Central Plains cultural from The Yan state have a important meaning to understand about the character of the Yuhuangmiao culture and the beginning development process. Ultimately, it is peculiar characters of the Yuhuangmiao culture that a shaft gave with stone compartment protecting a coffin as a symbolic form, mask-burial customs such as mainly burials of the living with the dead dogs, a drum shaped jar, a tripod jar with two handles, a short bronze sword with circle hilt, Central Plains cultural bronze containers, bronze halberd and horse-shaped accessories of cartage horse trapping are distinguished from a local neighbor, the bronze culture from northern. The territory of time-space of The Yuhuangmiao culture can be dominately recognized bewteen the upper Xiajiadian culture and Ordos bronze culture. It is the Yan culture after the middle Warring States Period considering with the peculiar chacters which reflected by burials and bural customs and diverse infuluential relationships with peripheral cultures.

• Korean Journal of Environmental Biology
• /
• v.39 no.2
• /
• pp.195-206
• /
• 2021

In 2020, South Korea initiated research and development of a longitudinal connectivity evaluation between upstream and downstream based on stream ecosystem health. This study analyzed the migration of upstream and downstream migratory fish species, fish distribution characteristics, trophic guilds, tolerance guilds, and species composition changes from 2015 to 2020 at Songrim weir in Yeongok stream, where the cross-structure of an ice harbor-type fishway for fish movement was recently improved. A total of 5,136 fish, including 36 species, were collected and three major migratory fishes were identified, namely, Tribolodon hakonensis, Plecoglossus altivelis altivelis, and Oncorhynchus keta. According to the comparative analysis before (Pre-I) and after (Post-I) improvement of the fishway, the relative abundance of primary freshwater fish increased in the upstream section, while the number of migratory fishes decreased. The fish species that used the fishway in the Songrim weir were Tribolodon hakonensis (58.4%) and Plecoglossus altivelis altivelis(11.8%). According to the Wilcoxon Signed-Rank Test migratory fish showed a statistically significant difference (p<0.05) in the upstream and downstream, showing a biological improvement effect of the crossstructure. On the other hand, the annual change of migratory fish based on the MannKendall trend test did not significantly increase or decrease (p>0.05). Therefore, in the fish passage improvement project, it is necessary not only for physical, hydrological, and structural tests, but also for pre- and post-biological tests on the use and improvement effect of fishway.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.1
• /
• pp.109-130
• /
• 2022

The Vietnamese government has proposed contract farming through a new type of cooperative as an institutional innovation which aims to restructure the agricultural sector. However, policy changes often impact farmers, who bear the primary effects of the transition process. Understanding households' strategies for land use and livelihood is crucial for policymaking in the agricultural development field. This study was conducted in the rural Binh Dao commune in Central Vietnam. We analyzed household members' labor force changes and their livelihood behaviors after their participation in a contract farming scheme using qualitative analysis methods combined with geographic information system (GIS) support, based on secondary data and in-depth interviews of 190 farmers. Simultaneously, we created a digital map of the cooperative's production area to investigate changes in land use and production activities. The findings show that contract farming shaped the vertical coordination of the value chain from the farmers to the cooperative and agricultural product trading companies. Subsequently, it encouraged land use and labor efficiency due to mechanical support. In addition, it also increased productivity and protected farmers from market risks. However, despite its positive effects on agricultural productivity in this case, the contract farming scheme could not achieve the restructuring of the rural labor force toward non-agricultural sectors. Ironically, farmers in the Binh Dao commune tended to increase cultivable land during the agricultural restructuring program, rather than switching their labor forces to non-agricultural sectors. The lack of stable non-farming job opportunities in rural Vietnam results in challenges to the efficiency of agricultural restructuring programs. Consequently, farmers in the Binh Dao commune are still smallholder farmers, depending on the family labor force.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.85-93
• /
• 2021

The seventy percentage of Korean Peninsular is covered by the mountainous area, and the depth of west sea and south sea is relatively shallow. Therefore, a large scale land reclamation from the sea has been implemented for the construction of industrial complex, residental area, and port and airport facilities. The common problem of reclaimed land is consisted of soft ground, and hence it has low load bearing capacity as well as excessive settlement upon loading on the ground surface. The hollow concrete block has been used to reinforce the loose and soft foundation soil where the medium-high apartment or one-story industrial building is being planned to be built. Recently the earthquakes with the magnitude of 4.0~5.0 have been occurred in the west coastal and southeast coastal areas. Lee (2019) reported the advantages of hollow concrete block reinforced shallow foundation through the static laboratory bearing capacity tests. In this study, the dynamic behavior of hollow concrete block reinforced sandy ground with filling the crushed stone in the hollow space has been investigated by the means of shaking table test with the size of shaking table 1000 mm × 1000 mm. Three types of seismic wave, that is, Ofunato, Hachinohe, Artificial, and two different accelerations (0.154 g, 0.22 g) were applied in the shaking table tests. The horizontal displacement of structure which is situated right above the hollow concrete block reinforced ground was measured by using the LVDT. The relative density of soil ground are varied with 45%, 65%, and 85%, respectively, to investigate the effectiveness of reinforcement by hollow block and measured the magnitude of lateral movement, and compared with the limit value of 0.015h (Building Earthquake Code, 2019). Based on the results of shaking table test for hollow concrete block reinforced sandy ground, honeycell type hollow block gives a large interlocking force due to the filling of crushed stone in the hollow space as well as a great interface friction force by the confining pressure and punching resistance along the inside and outside of hollow concrete block. All these factors are contributed to reduce the great amount of horizontal displacement during the shaking table test. Finally, hollow concrete block reinforced sandy ground for shallow foundation is provided an outstanding reinforced method for medium-high building irrespective of seismic wave and moderate accelerations.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.4
• /
• pp.334-340
• /
• 2021

Purpose: This study analyzed the bone mineral densities of the lumbar vertebrae and femurs of patients with ankle fractures to determine the correlation between ankle fractures and osteoporosis. Materials and Methods: From April 2002 to July 2014, one hundred consecutive ankle fracture patients with bone mineral density tests performed within post-traumatic one year were enrolled. The patients were divided into three age groups according to their age at the time of injury (group 1: <50, group 2: 50-69, group 3: ≥70). The types of ankle fractures were classified into unimalleolar, bimalleolar and trimalleolar fractures. The bone mineral density was analyzed using the T score, Z score, absolute value (g/cm²) of the lumbar spine (L1-L4), femur neck, femur intertrochanter, and total femur. Results: There were 3.2 times more females with ankle fractures than males, and the prevalence of osteoporosis according to age group was 0% in the group under 50 years, 24.2% in the 50 to 69-year-old group, and 15% in the group over 70 years. Osteoporosis was found in 30% of patients with a trimalleolar fracture in the 50 to 69-year-old group. In all patient groups, a lower age indicated a higher frequency of unimalleolar fractures. The relationship between the bone mineral density and the type of fracture is that the frequency of trimalleolar fracture increased with decreasing T score of the lumbar vertebrae and the absolute value of bone mineral density (g/cm²) and the Z score of the femur neck, but there were no other indicators. Conclusion: Among the 100 patients with ankle fractures, females were more common than males, because osteoporosis was less severe in males. The incidence of unimalleolar fracture was higher than that of trimalleolar fracture. On the other hand, the correlation between the ankle fractures and the bone mineral density of the femur and lumbar spine was not significant.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.345-358
• /
• 2021

This study focuses on the development of the liquid air production process that uses LNG (liquefied natural gas) cold energy which usually wasted during the regasification stage. The liquid air can be transported to the LNG exporter, and it can be utilized as the cold source to replace certain amount of refrigerant for the natural gas liquefaction. Therefore, the condition of the liquid air has to satisfy the available pressure of LNG storage tank. To satisfy pressure constraint of the membrane type LNG tank, proposed process is designed to produce liquid air at 1.3bar. In proposed process, the air is precooled by heat exchange with LNG and subcooled by nitrogen refrigeration cycle. When the amount of transported liquid air is as large as the capacity of the LNG carrier, it could be economical in terms of the transportation cost. In addition, larger liquid air can give more cold energy that can be used in natural gas liquefaction plant. To analyze the effect of the liquid air production amount, under the same LNG supply condition, the proposed process is simulated under 3 different air flow rate: 0.50 kg/s, 0.75 kg/s, 1.00 kg/s, correspond to Case1, Case2, and Case3, respectively. Each case was analyzed thermodynamically and economically. It shows a tendency that the more liquid air production, the more energy demanded per same mass of product as Case3 is 0.18kWh higher than Base case. In consequence the production cost per 1 kg liquid air in Case3 was $0.0172 higher. However, as liquid air production increases, the transportation cost per 1 kg liquid air has reduced by $0.0395. In terms of overall cost, Case 3 confirmed that liquid air can be produced and transported with $0.0223 less per kilogram than Base case.