• 대한물리의학회지
• /
• 제3권1호
• /
• pp.1-9
• /
• 2008

Purpose : The purpose of this study is to assess the effects of ice immersion to the ankle, foot on vertical jump, isokinetic exercise. Methods : Thirty volunteers from universal students who had not sustained an injury to the lower extremity within the past 6 months were randomly assigned to either an experimental or control group. Subjects in the experimental group performed vertical jump and isokinetic exercise before and after the application of a 15-minute ice immersion($50-55^{\circ}F$) to the ankle and foot. Subjects in the control group performed vertical jump and isokinetic exercise before and after the application of a 15-minute resting. Results : Shuttle run was not significantly decreased after than before the application of a 15-minute ice immersion($50-55^{\circ}F$) to the ankle and foot(p<0.05). Vertical jump was significantly decreased after than before the application of a 15-minute ice immersion($50-55^{\circ}F$) to the ankle and foot(p<0.05). Speed $60^{\circ}$ of peak torque was significantly decreased after than before the application of a 15-minute ice immersion($50-55^{\circ}F$) to the ankle and foot(p<0.05). Speed $120^{\circ}$ of peak torque was significantly decreased after than before the application of a 15-minute ice immersion($50-55^{\circ}F$) to the ankle and foot(p<0.05). Conclusion : we think because the ice immersion decrease active, physical therapist should carefully consider the consequence of cold therapy to increase active.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.169-172
• /
• 2002

In this study, the effects of the number of coat and immersion period on strength properties, waterproofness and chemical resistance of painted and immersed cement mortars using two admixture were examined. Test results showed that the flexural and the compressive strengths of the coated and immersed cement mortars increase with increasing number of coat and immersion period. The water absorption of the coated and immersed cement mortars tended to decrease with increasing number of coated and immersion period. In the case of the change of weight and the immersion period for the solutions, a decreasing tendency was shown as the immersion period increases regardless of solution, with a little variation.

• 한국조경학회지
• /
• 제37권3호
• /
• pp.61-68
• /
• 2009

3차원 몰입형 시뮬레이션이나 입체영상 기술이 개발되면서 경관을 표현하는 도구로 사용이 확산되고 있다. 이에 본 연구는 가시환경과 투사방식의 차이에 따른 경관선호도 분석을 실시하여 가로경관 평가도구로써 곡면 스크린 방식의 몰입형 입체영상의 활용 가능성을 검토하였다. 연구를 위해 서울의 50m 폭원 강남대로를 선정하여 컴퓨터그래픽으로 시뮬레이션을 제작하였다. 시뮬레이션은 가시 환경과 투사방식을 달리하여 경관선호도를 설문조사하였다. 시뮬레이션의 가시환경은 몰입과 비몰입, 투사방식은 입체와 평면영상으로 구분하였다. 요인분석과 t-test 등의 통계분석을 거쳐 가시환경과 투사방식의 차이에 따른 경관특성을 비교하였다. 연구결과는 다음과 같다. 첫째, 몰입이나 비몰입 환경에 따라 경관특성의 차이가 뚜렷하게 나타났다. 몰입형의 시뮬레이션을 이용하면 관찰자가 다양성 요인, 개방성 요인, 공간감 요인에 대해 평가하기가 비교적 용이하여 변별력이 높은 것으로 나타났다. 둘째, 입체나 평면의 투사방식은 변별력을 보이고 있지 않는 것으로 나타났다. 이러한 결과는 경관평가를 위한 시뮬레이션의 제작 및 투사에 있어서 관찰자가 몰입을 할 수 있는 시야각까지 화면을 확장하여 몰입감을 높이는 것이 중요하다는 것을 시사한다. 본 연구는 경관평가 도구로써의 몰입형 시뮬레이션의 효용성을 검토하기 위한 연구로 가로경관의 많은 요소들을 통제하게 됨으로써 변별력을 크게 갖지 못했다는 한계가 있다. 추후 가로폭원, 가로폭원 : 건물높이비 등 다양한 환경에 대해 입체영상에 대한 세밀한 비교 검증이 필요할 것으로 보인다.

• 디지털융복합연구
• /
• 제19권11호
• /
• pp.457-462
• /
• 2021

본 연구는 VR 게임에서 시각적 몰입감을 향상할 수 있는 제작 기법에 관한 연구이다. 먼저, 선행연구를 통해 VR 게임과 현황, 시각 및 몰입감에 관한 이론을 검토하고, 표본을 정하여 VR 게임에서 시각적 몰입을 향상할 수 있는 주요 구성 요소들을 추출하였다. 그리고 현재 전 세계 팬데믹 현상인 코로나19(COVID-19)의 콘셉트를 적용하여 VR 게임을 제작하고 개발하였다. 그 결과, 기술적 구성 요소의 해상도, 프레임 레이트, 시야각, 조명의 밝기, 디자인 품질과 내용적 구성 요소의 스토리텔링, 배경, 연출, 색상과 질감, 흥미와 재미를 통해 VR 게임을 플레이하는 과정에서 시각적 몰입을 유도하고 향상할 수 있는 유의미한 결과를 얻었으며, 최종적으로 원활한 게임 플레이를 구현할 수 있었다. 본 연구 과정 및 결과를 통해 향후 사용자의 시각적 몰입을 유도하고 향상할 수 있는 VR 게임의 제작과 개발 분야에 기초 자료가 될 것으로 기대한다.

• 한국식품영양과학회지
• /
• 제26권5호
• /
• pp.866-871
• /
• 1997

This study was carried out to determine the effect of osmotic dehydration as pretreatment on the qualities of dried cherry-tomatoes. The weight reduction and solid gain in osmosed cherry-tomato were increased by increasing sugar concentration, immersion temperature and time; among three parameters, the immersion temperature affected more than sugar concentration and immersion time did. The moisture content was decreased as increasing sugar concentration, immersion temperature and time, and it was the lowest at the osmotic conditions of 7$0^{\circ}C$, 60$^{\circ}$Brix and 11hr. To determine the optimum processing condition by RSm, the polynomial optimum models were established. The regression models was significant (p<0.05). It was used contour plots to optimize osmotic dehydration. The optimum condition for osmotic dehydration as pretreatments for drying of cherry-tomatoes were immersion temperature of 47~53$^{\circ}C$, sugar concentration of 39~43$^{\circ}$Brix, and immersion time of 7hr, in which process conditions were 78~86% moisture content, 8.5~10$^{\circ}$Brix sugar content and 80~86% weight reduction.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.18-23
• /
• 2019

The oil immersion method can be used to create objective lenses with long working distances without sacrificing the focusing resolution for laser processing. In this study, a space in which air or oil can be filled was formed in the middle of a lens for analyzing the optical properties of a liquid-oil immersion lens. As the refractive media, air and oils of different refractive index values (1.2 and 1.5, respectively) were used. A simulation was conducted in the ZEMAX software environment using the ray-tracing technique, and the performance of the oil immersion lens was verified by determining its image distortion and focal length (FL) in each medium. In the case of air, the calculated FL was 0.813 mm, whereas the imaged FLs were 1.594 mm and 8.126 mm when the refraction indices were 1.2 and 1.5, respectively. The FL of an oil immersion lens could be increased considerably. In terms of image distortion, the oil immersion lens exhibited little distortion at the center in all cases, but different degrees of image distortion were observed at different points away from the center depending on the refraction index degree.

• International Journal of Contents
• /
• 제16권4호
• /
• pp.1-15
• /
• 2020

This study examined the impact of chatbot service quality (process quality, outcome quality, and servicescape quality) on user satisfaction and reliability by identifying the relationships between user satisfaction, reliability, immersion, and the paths of three variables influencing reuse intention. The survey was conducted of Korean users in their teens and 70s who had experience using chatbot services. A total of 218 convenience samples were extracted and the data analyzed. By the IS success and SERVQUAL model, the results of structural equation modeling revealed that the chatbot service quality did not affect user satisfaction and reliability. However, user satisfaction and reliability of the chatbot services were shown to lead to reuse intention, and user satisfaction was shown to affect immersion and immersion in reliability. The results showed that satisfaction, reliability, and immersion in the chatbot services were important factors in the chatbot reuse intention. Through the satisfaction and reliability gained through the service, the users wanted to reuse the chatbot services, especially the chatbot services that gained reliability, which will have a greater impact on reuse intention. We can use these results as marketing information to attract loyal customers by identifying the reuse intention of the chatbot service users.

• 한국재난정보학회 논문집
• /
• 제18권1호
• /
• pp.163-172
• /
• 2022

연구목적: Li-ion 배터리의 효율적인 열관리 기술을 확보하기 위하여 Single&-phase 침지 냉각 기술을 적용한 시스템의 실험을 통하여 적용가능성을 확인하고자 하였다. 연구방법: LG-Chem에서 생산된 JH3 파우치 셀을 사용하여 14S2P 모듈을 제조하여 미국 카길사에서 생산된 식물성계 냉각유체에 침지한 후 0.3C~1C 속도로 충방전을 시행하여 열분포를 확인하였다. 연구결과: 침지냉각 기술로 배터리 모듈을 40℃ 이하의 온도로 관리할 수 있으며, 침지액의 분자구조 변화가 없다는 결과를 도출하였다. 결론: 침지냉각 방식이 Li-ion 배터리 열관리에 적용 가능함을 확인하였다.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.43-49
• /
• 2014

This study has been investigated on the durability of carbon fiber/epoxy composites (CFRP) in moisture environment. The carbon fiber/epoxy composites were modified to use the nanoparticles such as carbon nanotubes and titanium oxide. These hybrid composites were exposed to moisture environment for a certain period of time. Weight gain according to immersion time, quasi-static tensile test and micro-graphic characterization were investigated on the samples exposed to moisture environment. Consequently, the weight gains increased with increasing immersion time and weight gain of the hybrid composites was lower than the one of CFRP through the whole immersion time. The tensile strengths decreased with increasing immersion time and tensile strengths of the hybrid composites were higher than the one of CFRP through the whole immersion time. The CFRP were observed more degraded than hybrid compositess in moisture environment. Therefore, it was concluded that the addition of nanoparticles in CFRP could lead to improve the durability in moisture environment.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.541-549
• /
• 2019

In the present study, we investigated planing forces of supercavitated bodies by using the supercavitation shape produced by the disk type cavitator. The cavity shapes are observed to find the immersion draft and planing angle when the stern of the supercavitated body is partially immersed in the water. To make the planing the angle-of-attack (AOA) of the supercavitated body is varied statically against the main flow and the planing tests are carried out for different body shapes that are changed systematically. The drag, lift and pitch moment acting on the body are measured to understand the relation between the planing force and the immersion draft of the supercavitated body. It is found that the planing force increased in general linearly with the immersion draft ratio and the planing angle is certainly not proportional to the immersion draft ratio.