• 한국멀티미디어학회논문지
• /
• 제11권8호
• /
• pp.1093-1100
• /
• 2008

블록 암호를 설계하는 방식으로 크게 Feistel 구조와 SPN 구조로 나눌 수 있다. Feistel 구조는 암호 및 복호 알고리즘이 같은 구조이고, SPN구조는 암호 및 복호 알고리즘이 다르다. 본 논문에서는 암호와 복호 과정이 동일한 SPN 구조 블록 암호 알고리즘을 제안한다. 즉 SPN 구조 전체를 짝수인 N 라운드로 구성하고 1 라운드부터 N/2라운드까지는 정함수를 사용하고, (N/2)+1 라운드부터 N 라운드까지는 역함수를 사용한다. 또한 정함수 단과 역함수 단 사이에 대칭 블록을 구성하는 대칭 단을 삽입한다. 본 논문에서 정함수로는 안전성이 증명된 AES의 암호 알고리즘을, 역함수로는 AES의 복호 알고리즘을 사용하고, 대칭 단은 32 비트 회전과 간단한 논리연산을 사용하여 비선형성을 증가시켜 바이트 또는 워드 단위의 공격에 강하게 한다. 본 논문에서 제안한 암호와 복호가 동일한 대칭 구조 SPN 알고리즘은 하드웨어 구성이 간단한 장점을 가지므로 제한적 하드웨어 및 소프트웨어 환경인 스마트카드와 전자 칩이 내장된 태그와 같은 RFID 환경에서 안전하고 효율적인 암호를 구성할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.517-522
• /
• 2002

The frequency response function(FRF) of each substructure is used for the transfer function synthesis method(TFS). The dynamic characteristics of the full system are obtained by synthesizing FRFs of each substructure. The validation of TFS depends on accuracy for FRF of each substructure. Impact hammer testing is widely used to obtain the modal characteristics of structures. However, the FRF obtained from impact hammer testing contains several errors, such as finite record length error and leakage error of which characteristic depends on data acquisition time which we call record length. In this paper, a method to remove these errors is proposed so as to enhance results of TFS. Numerical examples show that the FRF of full structure can be predicted exactly by the method proposed in this paper.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.24-29
• /
• 2006

The use electron-beam(E-beam) manufacturing system provides a means to alleviate optic exposure equipment's problems. We are developing an E-beam manufacturing system with scanning electron microscope(SEM) function. The E-beam manufacturing system consist of high voltage generator, beam blanker, condenser lenses, object lenses, stigmator and stage. The development of E-beam manufacturing system is used on the method of remaking SEM's structure. The functions of SEM are developed. It is important for the test of E-beam performance. In E-beam manufacturing system and SEM, beam focus is important function. In this paper, we propose intelligent remote control function for beam focus in E-beam manufacturing system. The function extends the user's function and gives convenience.

• Structural Engineering and Mechanics
• /
• 제55권6호
• /
• pp.1157-1176
• /
• 2015

This study presents optimizing structural topology patterns using regularization of Heaviside function. The present method needs not filtering process to typical SIMP method. Using the penalty formulation of the SIMP approach, a topology optimization problem is formulated in co-operation, i.e., couple-signals, with design variable values of discrete elements and a regularized Heaviside step function. The regularization of discontinuous material distributions is a key scheme in order to improve the numerical problems of material topology optimization with 0 (void)-1 (solid) solutions. The weak forms of an equilibrium equation are expressed using a coupled regularized Heaviside function to evaluate sensitivity analysis. Numerical results show that the incorporation of the regularized Heaviside function and the SIMP leads to convergent solutions. This method is tested using several examples of a linear elastostatic structure. It demonstrates that improved optimal solutions can be obtained without the additional use of sensitivity filtering to improve the discontinuous 0-1 solutions, which have generally been used in material topology optimization problems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.210-215
• /
• 2007

In this paper, excitation systems using an active tuned mass damper (ATMD) are presented in order to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. The analyses results from a 76-story benchmark building problem in which wind load obtained by wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately embody the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.

• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.61-67
• /
• 1995

This study examines experimentally and theoretically, the wave deformation by two large cylindrical structure in relation to the case of one structure. The wave height around the structures varies, according to the changes of the incident wave angles, the number of the structure, and the distances between the two structures. The wave deformation around the large cylindrical structures is shown to be well predicted theoretically by the diffraction theory based on the singular point distribution method using a vertical line wave source Green's function.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.623-628
• /
• 2002

A meshfree formulation for the calculation of energy band structure is presented. The conventional meshfree shape function is modified to handle the periodicity of Bravais lattice, and applied to the calculation of real-space electronic-band structure. Numerical examples include the Kronig-Penney model potential and the empirical pseudopotentials of diamond and zinc-blonde semiconductors. Results demonstrate that the meshfree method be a promising one as a real-space technique for the calculations of diverse physical band structures.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.40-44
• /
• 2019

The light diffusion component spreads the light from one point evenly over a large area. Various types of light diffusion parts such as films and lenses are applied in the high-tech industries such as LCD display devices, lighting devices, and solar energy generation. Among these, a diffuser sheet (Diffuser Sheet) has a function to uniformly distribute the light, and various studies have been conducted to improve its function. The shape of the conventional light diffusion pattern is mainly made of a dot or hemispherical shape. In this study, a rectangular cone-shaped structure having a light diffusion function and an advantage of controlling the angle of refraction of light was fabricated by using a solenoid indentation process. The change in shape of the indentation structure was analyzed.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.693-702
• /
• 1994

This paper deals with direct voltage stability analysis using a power system energy function. The structure preserved energy function is proposed as an energy function for voltage stability analysis. With the use of the proposed energy function voltage collapse conditions are derived, which yields the exactly same results with the Jacobian matrix approach. The voltage collapse phenomenon is analyzed by several methods, which shows that all of the methods produce the same voltage condition. This study also investigates the voltage collapse dynamics by using the proposed energy function. As a result, it has been found that the voltage collapse can be classified into two categories: static and dynamic instablilties which have quite different behaviors. In addition a new method is presented to calculate the power capacity limit of transmission lines with respect to voltage stability. The proposed method is tested for a 2-bus sample system, which shows the characteristics of voltage collapse phenomenon via the energy function.

• 한국시뮬레이션학회논문지
• /
• 제25권1호
• /
• pp.1-9
• /
• 2016

본 연구는 공대공 미사일 조종날개의 공력 및 구조를 동시에 고려한 구동력 최소화에 대한 최적화를 수행하였다. 본 연구에서는 조종날개의 공력 및 구조적 특성을 동시에 고려하기 위하여 공력-구조 연계 시뮬레이션을 사용하였으며 공력 및 구조 시뮬레이션에 각각의 전용 소프트웨어를 사용하고자 비정상-약결합 방식 연계기법을 적용하였다. 전역 최적화에는 많은 반복 계산이 필요하므로 빠른 계산을 위하여 수학적 모델링을 이용하였으며 이를 위하여 면 중앙 합성 실험계획법으로 실험점을 선정하였다. 선정된 실험점 및 그에 대한 공력-구조 연계 시뮬레이션 결과를 토대로 2차 다항식 반응면을 생성하였으며 생성된 수학적 모델링을 이용, 유전자 알고리즘 기반 전역최적 설계를 수행하였다. 최적화 목적함수는 마하 0.7 및 마하 2.0 사이의 압력 중심점 이동거리 최소화로 설정하였으며 최적화 결과 압력 중심점 이동거리가 7.5% 감소된 최적형상을 도출하였다.