• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.384-387
• /
• 2003

A new Direct Nonlinear Strut-Tie Model design method performing iterative calculations using secant stiffness was developed. Since basically the proposed design method uses elastic analysis, it has the advantages of convenience and stability in numerical analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it analyzes the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member. Through iterative calculations on the structure preliminary designed with member sizes, the strength and ductility demands of each member can be estimated so that they satisfy the given design strategy, and as the result economical and safe design is achieved.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.51-58
• /
• 1989

Through a series of analyses of specific structures it is shown that incremental collapse may be the critical design criterion and that shakedown analysis can be used as a design tool. Using shakedown analysis technique, a nonlinear structural optimization program has been developed. This incorporates : (ⅰ) design constraints on elastic stresses and deflections ; (ⅱ) constraints for the prevention of incremental collapse and soft story failure ; and (ⅲ) the constraint on the fundamental period of structure. A five-step design procedure is proposed by using this program to obtain the optimum design that satisfies all the requirements of comprehensive earthquake-resistant design.

• 전산구조공학
• /
• 제2권4호
• /
• pp.99-109
• /
• 1989

몇 가지의 예를 들어 점진적 붕괴가 내진설계의 중요한 설계기준이 될 수 있다는 것과 이와 관련하여 Shakedown 해석이 한 구조설계 도구로 사용될 수 있다는 사실이 밝혀진다. 이 Shakedown 해석기법을 사용하여 비선형 계획에 의한 최적 구조설계 프로그램이 개발되었는데, 이것은: (i) 탄성응력과 처짐에 대한 제약조건: (ii) 점진적 붕괴와 약충붕괴의 방지를 위한 제약조건: 그리고 (iii) 구조물의 기본주기에 대한 제약조건을 수용하고 있다. 마지막으로 내진설계의 모든 요구조건을 만족시키는 최적설계를 얻기 위하여, 이 개발된 프로그램을 이용한 5-단계 설계방법론이 제시되고 있다.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.209-217
• /
• 1999

In this paper, an integrated S/W system from CAD to optimal design has been suggested and an application to a precision machine tool structure shown. The integrated system is so designed to reduce manual interfacing effort. An object-oriented programming language is used for combining 3-D CAD program, FEM and optimal design tools. In this system parametric modelling technique is applied and users can get the optimum design iteratively without much user intervention. The CAD model is automatically updated when the design parameters are transferred back to the CAD program. Not only design time can be dramatically reduced but unnecessary operation errors avoided by the integration.

• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.73-79
• /
• 2009

객체지향 프로그래밍 언어를 기반으로 윈도우 사용자의 컴퓨터 파일시스템에 기록된 파일의 의미를 분석한 후, 이를 사용자 편의를 위해 파일명의 의미를 시소러스로 클러스터링 하는 설계를 하고, 파일로 기록된 문자의 의미와 파일확장자를 기반으로, 데이터베이스를 구성하고 참조하여 사용자 작성 파일들을 시소러스의 의미 체계와 통제어로 클러스터링 하여, 윈도우시스템의 화면표시 되는 Icon 파일들을 자동으로 분리하고, 설정하여, Mashup 시각구조로 나타내어 주는 프로세스(WTPM)를 설계하고 구현을 하였다.

• 한국전산구조공학회논문집
• /
• 제21권3호
• /
• pp.247-252
• /
• 2008

최근 전세계적으로 3차원 객체 모델(3D Object Model)을 활용하여 건설 프로젝트의 생애주기 동안 참여주체들이 효과적으로 정보를 공유하고 관리할 수 있도록 하는 가상건설시스템의 개발이 활발히 진행되고 있다. 이 논문에서는 가상 공간에서 토목구조물의 해석 및 설계를 위하여 반드시 필요한 구조물의 3차원 객체모델과 구조해석 시스템과의 인터페이스 설계를 다루었다. 3D 객체모델 생성에 필요한 인관 매개변수모델링 기법과 구조물의 구조해석에 필요한 다양한 변수를 고려할 수 있는 제품계층구조(product breakdown structure, PBS) 구축 방안을 제시하였다. PBS 구성시 3D 객체 모델 정보로부터 구조 해석에 필요한 속성 정보만을 추출하여 해석 프로그램에 적용이 가능하게 하였으며, 협업작업에 의해 결정되는 여러 수치를 다시 객체정보로 추가 작업 없이 전달하여 3D 객체 모델과 연동되어 변화될 수 있는 인터페이스 프로그램 설계 방안을 제안하였다. 향후 이 연구의 결과를 기반으로 개발된 3D 객체모델과 구조해석 시스템의 인터페이스 프로그램이 가상건설 시스템 구현에 효과적으로 사용될 수 있을 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.183-194
• /
• 1999

Using the dynamic model and simulation program TDA developed in the previous paper, effects of design parameters of an agricultural tractor-trailer system on its vertical seat vibrations were investigated. The tractor-trailer system was excited by traversing over a half-sine bump. The excitation frequencies were determined by traveling velocity of the tractor and a half-sine bump selected appropriately. TDA predicted the autospectra of the vertical seat accelerations with different values of design parameters and compared them to analyze their effects. The design parameters included positions of engine, cab, and seat mountings as well as their dynamic properties. The results of this study suggested guidelines with which an improved structure of tractor may be developed in the early stage of design for a better ride quality.

• 한국CDE학회논문집
• /
• 제16권5호
• /
• pp.323-330
• /
• 2011

Large number of part design such as for aircraft and automotive development is preceded by functional or sectional design groups for efficiency. With the assembly development of large number of parts, interferences and gaps can be found when the parts and sub-assemblies by those design groups are to be assembled. When rainwater come into the space among parts and is not be drained sufficiently, rainwater within the structure can backflow to gaps or unexpected outlets, which may cause severe problems of part corrosion and electric shock. This research has developed a method and a program to simulate backflow of rainwater within space among parts, which can find unexpected outlets and gaps as in real situation. The developed program can not only simulate up and downstream of liquid, but also the flow with multiple channels of division and joining. The developed method can also be applied to aircraft and ship design process.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.82-89
• /
• 1996

In this study, to choose the drilling m/c with analysis model for dynamic design of machine tool strctures, are used substucture syntheis method for reduction to degrees of freedom of dynamic model and analysis evaluation of substructures The dynamic factors of substurctures are examined by substructure synthesis method. And that dynamic design of structures for energy balancing are performed. The computer program for calculated of the dynamic and energy distribution analysis was developed. Result of numerical analysis by developed program obtained to conclusion as following. The design of machine tool structures by dynamic avoid the resonances, and are known to considered based on the energy balancing. These methods can be used effectively for the performance evaluation, design modification and improvement of dynamic performance evaluation, design modification and improvement of dynamic performance of machine tools.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.210-215
• /
• 1998

To design a space frame structure by the conventional method is not easy in practical sense since it is generally a three-dimensional complicated form, and stability and nonlinear problems are not easily checked in the design process. This paper describes two modules, the Model Generator which is based on PATRAN user interface that enables users to generate a complicated finite element model; the Optimum Design Module which analyzes output results of analysis program, and designs members of a space frame. The Model Generator is based on PCL while C++ language is used in the Optimum Design Module. Structural analysis is performed by using ABAQUS. All of these modules constitute Space Frame Integrated Design System. The Core of the system is PATRAN database, in which the Model Generator creates information of a finite element model. Then, PATRAN creates input files needed for the analysis program from the information of the finite element model in the database, and in turn, imports output results of analysis program to the database. Finally, the Optimum Design Module processes member grouping of a space frame based on the output results, and performs optimal member selection of a space frame. This process is repeated until the desired optimum structural members are obtained.