• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.4065-4083
• /
• 2021

Super-resolution can improve the clarity of low-resolution (LR) images, which can increase the accuracy of high-level compute vision tasks. Portable devices have low computing power and storage performance. Large-scale neural network super-resolution methods are not suitable for portable devices. In order to save the computational cost and the number of parameters, Lightweight image processing method can improve the processing speed of portable devices. Therefore, we propose the Enhanced Information Multiple Distillation Network (EIMDN) to adapt lower delay and cost. The EIMDN takes feedback mechanism as the framework and obtains low level features through high level features. Further, we replace the feature extraction convolution operation in Information Multiple Distillation Block (IMDB), with Ghost module, and propose the Enhanced Information Multiple Distillation Block (EIMDB) to reduce the amount of calculation and the number of parameters. Finally, coordinate attention (CA) is used at the end of IMDB and EIMDB to enhance the important information extraction from Spaces and channels. Experimental results show that our proposed can achieve convergence faster with fewer parameters and computation, compared with other lightweight super-resolution methods. Under the condition of higher peak signal-to-noise ratio (PSNR) and higher structural similarity (SSIM), the performance of network reconstruction image texture and target contour is significantly improved.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.249-255
• /
• 2022

Potholes are an important clue to the structural defects of asphalt pavement and cause many casualties and property damage. Therefore, accurate pothole detection is an important task in road surface maintenance. Many machine learning technologies are being introduced for pothole detection, and data preprocessing is required to increase the efficiency of deep learning models. In this paper, we propose a preprocessing method that emphasizes important textures and shapes in pothole datasets. The proposed preprocessing method uses intensity transformation to reduce unnecessary elements of the road and emphasize the texture and shape of the pothole. In addition, the feature of the porthole is detected using Superpixel and Sobel edge detection. Through performance comparison between the proposed preprocessing method and the existing preprocessing method, it is shown that the proposed preprocessing method is a more effective method than the existing method in detecting potholes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.200-206
• /
• 1984

This study was conducted to examine the morphological, physical and chemical characteristics of the Bancheon, Gopyeong, Hwadong and Deogpyeong series derived from diluvium in Korea. The results were as follows. 1. The sequence of the Bancheon, Gopyeong, Hwadong and Deogpyeong series consists of the soil catena. Thus, the Bancheon and Gopyeong series are weil drained, the Hwadong and Deogpyeong series moderately well drained due to the influence of topography and irrigation water. 2. The surface soils of the Bancheon and Gopyeong series are yellowish red, dark yellowish brown fine silty texture and the subsoils are yellowish red, red and strong brown fine clayey with moderate to strong angular blocky or subangular blocky structure with clayey cutans on the structural face. The surface soils of the Hwadong and Deogpyeong series are dark grayish brown, grayish brown fine silty texture and the subsoils are strong brown, light olive brown and brownish yellow fine silty or fine clayey with moderate to strong prismatic, angular blocky or subangular blocky structure with clayey cutans on the structural face. The consistences of all the subsoil horizons are extremely compact and hard, whereas sticky and plastic when wet. 3. The lower the topography, the higher the silt/clay ratio, soil reaction, organic matter, available water and phosphate content but the higher the topography, the higher the active iron content. 4. These soils are classified as Hapludalfs by Soil Taxonomy in U.S.D.A. 5. These soils must be applied with much lime, phosphate and compost to improve the soil fertility.

• Archives of design research
• /
• v.20 no.1 s.69
• /
• pp.229-242
• /
• 2007

In Japan, a country renowned for her traditional respect for handicraft, superior craft techniques have been transmitted from generation to generation. Modern Japanese textiles reinterprete these traditional techniques in a new light and combine them with modern technology, to make modern Japanese industrial textile both futuristic and traditional simultaneously. This combining of new technology and handicraft serves as a reservoir for a remarkable diversity and originality in the development of new technology and design, and constitutes an important trend in modern industrial textiles. The aim of this study is to investigate the developmental background of Japanese textile industry that championed this trend to make the Japanese development unique in modern textile industries and to consider the concept of modern textiles as well as the structural innovation as represented by this new trend, thus contributing to the development of creative textiles for the present and the future. The findings of this study can be summarized as follows. The combining of new technology and traditional handicraft: 1) was made possible by Japanese consciousness that values traditional culture and by early recognition of advanced textile industry, which awarded new meaning and value to the traditional handicraft leading to an expanded social role for textiles. 2) helped construct a modern concept of textiles by pursuing textile media that are state-of-the-art, aesthetic, and highly sensitive to satisfy the requirements of modern industrial textile such as high quality, high performance, and high sensitivity. 3) enabled new design ideas and creation of new styles by implementing structural innovation in industrial textiles that involved diversification of expression, diversity in materials, and emphasis on texture. In short, by combining new technology and traditional handicraft, Japan came up with a new sense of aesthetics that is highly original and high level and with which the rest of the world can easily sympathize, thereby presenting one of the most important guiding principles for future textiles.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.184-193
• /
• 2010

This paper proposes a biological iridescence BRDF(Bidirectional Reflectance Distribution Function) compression and rendering method. In the graphics technology, iridescence sometimes is named structure colors. The main features of these symptoms are shown transform of color and brightness by varying viewpoint. Graphics technology to render this is the BRDF technology. The BRDF methods enable realistic representation of varying view direction, but it requires a lot of computing power because of large data. In this paper, we obtain reflection map from iridescence BRDF, analyze color of reflection map and propose representation method by several colorfully concentric circle. The one concentric circle represents beam width of reflection ray by one normal vector. In this paper, we synthesize rough concentric by using several virtually optical normal vectors. And we obtain spectrum information from concentric circles passing through the center point. The proposed method enables IBR(image based rendering) technique which results is realistic illuminance and spectrum distribution by one texture from reduced BRDF data within spectrum.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.56-63
• /
• 2016

This experiment was compared and analyzed between the original surface paint through chloride penetration, neutralization, freeze-thaw and chemical corrosion resistance measuring internal structure and volume of voids in order to evaluate the effect of increase in durability of the newly modeled nano synthesized polymer paint painted on concrete surface which results improvement on air permeability to increase the durability of concrete structures. The test result of measuring volume of void and inner structure, concrete, spreaded with nano synthesized polymer paint, showed decreasing trend of pore volume in the range of less than $0.1{\mu}m$ and more than $0.3{\mu}m$. Also, using an electron microscope inside showed tightness of hydration texture. Chloride penetration depth of concrete, painted with nano synthesized polymer paint, was decreased more than 92% compared to non-painted concrete and 70% with water-based epoxy painted concrete. Especially, chemical corrosion resistance test set with aqueous solution of 5% sulfuric acid, non-painted concrete and water-based epoxy painted concrete showed weight loss of 4% after dipping for 12 days. On the other hand, concrete painted with nano synthesized polymer paint showed 1.7% weight loss under the same condition. Also, it showed great result of appearance under the criteria of Tsivilis et al.

• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.469-478
• /
• 1997

The purpose of this study was to evaluate the structural change of root surface and the occlusion of dentinal tubule following $CO_2$ laser treatment. Seven extracted healthy human premolar werw curetted, sectioned, and four specimens were randomly assigned to each of 6 different treatment groups : 1) untreated EDTA etched control: 2) root plande only: 3) $CO_2$ laser treated with 2W mode 6(10msec/pulse, 20pps) for 1 minute: 4) $CO_2$ laser treated with 2W mode 6(lOmsec/pulse, 20pps) for 2 minutes: 5) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 1 minute: 6) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 2 minutes. Following the prescribed treatment, the specimens were prepared for SEM evaluation. Results showed that $CO_2$ laser may be effective to occlude dentinal tubules tor dentin sensitivity treatment. The effect of dentinal tubule occlusion was enhanced with increasing the total energy level lased to specimen regardless of lasing mode. The structural changes of root surfaces were restricted to superficies, and these changes included fissuring, charring, crater formation over the smooth lava like texture. The charring and crater formation implying root damage was observed in the case of the longer duration of a pulse. The results of the present study suggests that the pulsed $CO_2$ laser with shorter pulse duration and longer exposure time can be used effectively in order to obtain the optimal dentinal tubule occlusion with minimal root damage.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.143-148
• /
• 2018

Sodium silicate based silica aerogels are lower in cost than silica alkoxide based silica aerogels, but the demand is decreasing as their physical properties are lowered. In this research, acetonitrile as a drying control chemical additive (DCCA) is added in the sol state to improve the pore-structural properties of sodium silicate based silica aerogel by preventing the agglomeration of particles and cross-linked bond. The sodium silicate based silica aerogel by ambient pressure drying were prepared by sol-gel process. Acetonitrile/$Na_2SiO_3$ molar ratio of 0, 0.05, 0.1, 0.15, and 0.2 was added to the sol state. The physical properties of the final product were analyzed using Fourier transform infrared, contact angle measurement, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda measurements and field emission scanning electron microscopy. It was confirmed that the sample with adding 0.15 molar ratio of acetonitrile and sodium silicate showed a high specific surface area ($577m^2/g$), a high pore volume (3.29 cc/g), and a high porosity (93%) comparable to the pore-structural properties of silica alkoxide based silica aerogels.

• Journal of the Korean Society of Costume
• /
• v.37
• /
• pp.253-273
• /
• 1998

The culture reflects the ideology of a particular period in time and such values change according to the needs and requests of that time which eventually becomes an important factorin forming the exterior. The clothing is part of a way that composes and expresses the inherent substance of society and culture. Also, the clothing itself manifests the artistic values and behavior of mankind as an external structure maintaining its place as a big part in culture. The purpose of this study are to elucidat the concept of naturalism, which is discussed in many facets in the modern era; I studied the concept as well as the history of naturalism in order to manifest the meaning of clothing in the context of culture and I explained the concept in terms of the modern era. On such ground, I explained the naturalism expressed through clothing and characterized the exter-nal form of clothing. Also, in order to know the stream of naturalism in the modern context, I referred to the Vogue magazine of the 90s, using Delong's ABC method. Naturalism, in the context of modern fashion is a way to express the nostalgia of nature's vi-ability and purity of ecology apart from the artificial and structural appearance that resulted form scientific enhancement and hence, the ecological crisis. Naturalism pursues the soft- ness and comfort of the natural silhouette, color and material of the human body and it can be said that naturalism emphasizes the mix-ture of three substances : human, nature and clothing. The naturalism can be characterized by the factors expressed in clothing as follows. First, the naturalism shown in the form it-self draws the beauty of the bodyline without any reduction nor exaggeration. Without any distorttion of the human bodyline it shown the curve as one moves along, using the soft material. Second, the naturalism shown in color most-ly uses the natural tone with added white color and other color low in intensity and value like the receded colors of the earth that could be compared to the beauty of ecru. Third, the naturalism shown in the material is thin, light and soft in texture. In order to bring out the most natural curve of the human body, the natural fiber becomes the main material, sometimes, using crude materials. Due to the lindustrial improvement, softness and elasticity is added to the natural fibers giving them an important role as materials. Fourth, the naturalism shown in textile depicts the real natural objects in life. According to my study, the personality of naturalism in modern clothing was shown to be most strong in material and then in the order of form, texture and textile. The material com-posed of the natural silhouette and natural fibers were used to make soft color. In form, Paul Poiret made appearance expressing the natural beauty of the human body without the corset ; it continued with the inner lining making the clothing hard but in the 90s, lining-less, extremely exposed clothes and knit wear is used to emphasize the natural beauty of the body. In color and textile, the tendency spok-en above is not as strong but in color, instead of high intensity or value, the usage of neutral colors with added white color or ecru color, ear-th tone is increasing. In textile, the usage of flowers as natural material is seen frequently. As a whole, naturalistic trend in the 90s is increasing and the modern fashion is breaking out from the artificial and architectural form and conforming to a form that can realize the natural beauty of the human body. And the natural color and textile that conforms to such ideas are being used to pursue the human oriented trend that has appeared due to the increase in usage of soft natural fiber. Nowadays, the idea of returning to nature, defying the artificiality, desiring the leisure and psychological abundance that can be explained as naturalistic way of thinking is necessitated in this modern era as long as humans coexist with nature, this tendency will continue in clothing.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.295-305
• /
• 2020

Treatment for beauty using oxidizing agents damages hair with inducing structural alteration in cuticle layer, degradation of protein, and loss of lipid. This study connects a frictional coefficient upon the damaged hair by an instrumental test to the texture test by human being, and considered a moisture as a factor of the damage. A friction coefficient has been measured upon the hair with successive treatment of dye, perm, and bleach. The friction coefficient from the hair dye-treated three times was defined with 0.60, where 58% of answerer indicated an initial damage point as the hairs of iteration of dye-treatment increased. Even bleach treated three times results in 0.84 of friction coefficient corresponding to 88% of answerer attributed the hair to an initially damaged hair. In order to figure out a lipid loss in hair for human being to respond damage, a friction coefficient of the hair was controlled by removing 18-methyleicosanoic acid (18-MEA). The initial damage has been recognized by 0.60 of the friction coefficient for the 68% of answerer. Since moisture is the largest portion of the components in hair, moisture analysis has been performed to study a relationship between texture of damage and the friction coefficient from an instrumental evaluation. As an iteration of dye increases, the hair became hydrophilic with smaller contact angle. It is found that a damaged hair by dyeing possessed more than 0.42% of moisture compared to a healthy hair. Finally, it is elucidated that an increase of moisture in hair induced higher adhesive force corresponding to the friction coefficient, and the friction coefficient above 0.6 is attributed to the preception of hair damage.