• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1988년도 가을 학술발표회 논문집
• /
• pp.24-29
• /
• 1988

In this paper, it is proposed hew the rigid element method suggested in the first paper can be applied to the elastic and elasto-plastic analysis of spherical shell with the open stiff ring. In the analytical model, the solution domain is divided into rectangular-shaped spherical bending elements. Each contact surface of two adjacent elements is interconnected with four elastic springs, and it is assumed that the internal forces are distritributed into springs. The 6 degrees of freedom of the element are placed in the center of elements, and the 6 cen-teroidal rigid displacements affect other elements through springs around elements. And then the solution domain is estimated by the behavior of elements and springs. In this study, these concepts are applied to the elastic and elasto-plastic analysis for the eight cases of the spherical shell according to the condition of stiff ring, the condion of loading and the size of opening. And then some numerical results such as the distribution of stresses, the force-displacement curves and the mode of fractures will he shown.

• 전산구조공학
• /
• 제7권2호
• /
• pp.139-146
• /
• 1994

볼트 접합부의 정확한 해석을 위하여 접합 요소와 볼트 요소 및 쉘 요소를 사용한 방법을 개발하였다. 접합면을 단순하게 이상화시키는 접합 요소와 장력을 갖는 볼트 요소를 도입하였고, 전체적인 계산과정은 2단계, 즉 제안된 방법에 의한 초기 강성의 결정과 뉴턴-랩슨법에 근거하는 호장법을 이용한 비선형 거동의 추적으로 구분하여 행함으로써 계산의 효율성을 증대시켰다. 앵글을 사용한 반강접 접합부와 모멘트 판을 사용한 접합부를 해석하여 기존 실험 및 해석과 비교함으로써 제안한 방법의 정확성과 적용성을 입증하였다. 또한 볼트 접합부의 정확한 해석을 위해서는 접합면에서 발생하는 미끄럼짐의 고려가 반드시 필요하며 접합부를 구성하는 판재의 3차원적인 변형의 해석도 무시할 수 없는 역할을 하는 사실을 보여주었다.

• 전산구조공학
• /
• 제8권3호
• /
• pp.91-102
• /
• 1995

지하터널은 그 경계가 반무한영역에서 설정되고 재료나 형상의 복잡성을 갖고 있기 때문에, 동적하중에 대하여 정확한 거동을 해석하기 위해서는 3차원 동적해석이 필요하다. 이때 일반적인 수치해석기법인 유한요소만을 이용한 방법은 인위적 경계에서의 파의 반사, 입력자료의 방대함 등으로 인하여 효율적이지 못하게 된다. 본 연구는 이러한 점을 고려하여 지하터널에 직접 가해지는 동적하중에 대한 효율적인 해석기법을 개발하는데 그 목적이 있다. 개발된 프로그램에서 지반의 반무한성은 3차원 경계요소로 고려되었으며, 구조물에는 3차원 동적해석을 수행한 결과 기존의 2차원 터널해석에서 고려가 곤란했던 차량의 진행하중으로 인한 반복효과가 합리적으로 반영되는 것으로 분석되었다.

• 한국전산구조공학회논문집
• /
• 제27권3호
• /
• pp.183-189
• /
• 2014

본 연구에서는 다면체 요소의 개발을 위하여 Wachspress 좌표계와 이동최소자승 근사를 기반으로하는 형상함수와 수치적분 방법을 제시하고 있다. 사면체 요소를 사면체 영역으로 분할하여 형상함수가 구성이 되고 이 영역을 사용한 일관성있는 수치적분이 수행되게 된다. 다면체 요소 면에서 Wachspress 좌표계를 사용하고 요소 내부에서 라플라스 방정식을 적용하여 이동최소자승 근사의 가중함수를 정의하게 된다. 본 연구에서 개발되는 다면체 요소의 형상함수와 수치적분 방법은 일반적인 유한요소와 유사한 특성을 갖게 되는데 수치 예제를 통하여 유효성을 보여주었다.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1193-1208
• /
• 2014

A simulation of failures on responsible elements is only one form of the extreme structural behavior analysis. By understanding the dynamic behavior in incidental situations, it is possible to make a special structural design from the point of the largest axial force, stress and redundancy. The numerical realization of one such simulation analysis was performed using FEM in this paper. The boundary parameters of transient analysis, such as overall structural damping coefficient, load accelerations, time of load fall and internal forces in the responsible structural elements, were determined on the basis of the dynamic experimental parameters. The structure eigenfrequencies were determined in modal analysis. In the study, the basic incidental models were set. The models were identified by many years of monitoring incidental situations and the most frequent human errors in work with heavy structures. The combined load models of structure are defined in the paper since the incidents simply arise as consequences of cumulative errors and failures. A feature of a combined model is that the single incident causes the next incident (consecutive timing) as well as that other simple dynamic actions are simultaneous. The structure was observed in three typical load positions taken from the crane passport (range-load). The obtained dynamic responses indicate the degree of structural sensitivity depending on the character of incident. The dynamic coefficient KD was adopted as a parameter for the evaluation of structural sensitivity.

• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.599-620
• /
• 2011

The investigation on possible causes of failures related to documented collapses is a complicated issue, primarily due to the scarcity and inadequacy of information available. Although several studies have tried to understand which are the inherent structural deficiencies or circumstances associated to failure of the main structural elements in a reinforced concrete frame, to the authors knowledge a uniform approach for the evaluation building static vulnerability, does not exist yet. This paper investigates, by means of a detailed case study, the potential failure mechanisms of an existing reinforced concrete building. The linear elastic analysis for the three-dimensional building model gives an insight on the working conditions of the structural elements, demonstrating the relevance of a number of structural faults that could sensibly lower the structure's safety margin. Next, the building's bearing capacity is studied by means of parametric nonlinear analysis performed at the element's level. It is seen that, depending on material properties, concrete strength and steel yield stress, the failure hierarchy could be dominated by either brittle or ductile mechanisms.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.313-337
• /
• 2012

A three-dimensional formulation is proposed to analyze the lateral loading distribution of external actions in high-rise buildings. The method is extended to encompass any combination of bracings, including bracings with open thin-walled cross-sections, which are analyzed in the framework of Timoshenko-Vlasov's theory of sectorial areas. More in detail, the proposed unified approach is a tool for the preliminary stages of structural design. It considers infinitely rigid floors in their own planes, and allows to better understand stress and strain distributions in the different bearing elements if compared to a finite element analysis. Numerical examples, describing the structural response of tall buildings characterized by bracings with different cross-section and height, show the effectiveness and flexibility of the proposed method. The accuracy of the results is investigated by a comparison with finite element solutions, in which the bracings are modelled as three-dimensional structures by means of shell elements.

• Earthquakes and Structures
• /
• 제18권5호
• /
• pp.649-665
• /
• 2020

One of the most important issues in structural systems is evaluation of the margin of safety in low and mid-rise buildings against the progressive collapse mechanism due to the earthquake loads. In this paper, modeling of collapse propagation in structural elements of RC frame buildings is evaluated by tracing down the collapse points in beam and column structural elements, one after another, under earthquake loads and the influence of column removal is investigated on how the collapse expansion in beam and column structural members. For this reason, progressive collapse phenomenon is studied in 3-story and 5-story intermediate moment resisting frame buildings due to the corner and edge column removal in presence of the earthquake loads. In this way, distribution and propagation of the collapse in progressive collapse mechanism is studied, from the first element of the structure to the collapse of a large part of the building with investigating and comparing the results of nonlinear time history analyses (NLTHA) in presence of two-component accelograms proposed by FEMA_P695. Evaluation of the results, including the statistical survey of the number and sequence of the collapsed points in process of the collapse distribution in structural system, show that the progressive collapse distribution are special and similar in low-rise and mid-rise RC buildings due to the simultaneous effects of the column removal and the earthquake loads and various patterns of the progressive collapse distribution are proposed and presented to predict the collapse propagation in structural elements of similar buildings. So, the results of collapse distribution patterns and comparing the values of collapse can be utilized to provide practical methods in codes and guidelines to enhance the structural resistance against the progressive collapse mechanism and eventually, the value of damage can be controlled and minimized in similar buildings.

• Earthquakes and Structures
• /
• 제18권6호
• /
• pp.691-707
• /
• 2020

One of the most important issues in structural systems is evaluation of the margin of safety in low and mid-rise buildings against the progressive collapse mechanism due to the earthquake loads. In this paper, modeling of collapse propagation in structural elements of RC frame buildings is evaluated by tracing down the collapse points in beam and column structural elements, one after another, under earthquake loads and the influence of column removal is investigated on how the collapse expansion in beam and column structural members. For this reason, progressive collapse phenomenon is studied in 3-story and 5-story intermediate moment resisting frame buildings due to the corner and edge column removal in presence of the earthquake loads. In this way, distribution and propagation of the collapse in progressive collapse mechanism is studied, from the first element of the structure to the collapse of a large part of the building with investigating and comparing the results of nonlinear time history analyses (NLTHA) in presence of two-component accelograms proposed by FEMA_P695. Evaluation of the results, including the statistical survey of the number and sequence of the collapsed points in process of the collapse distribution in structural system, show that the progressive collapse distribution are special and similar in low-rise and mid-rise RC buildings due to the simultaneous effects of the column removal and the earthquake loads and various patterns of the progressive collapse distribution are proposed and presented to predict the collapse propagation in structural elements of similar buildings. So, the results of collapse distribution patterns and comparing the values of collapse can be utilized to provide practical methods in codes and guidelines to enhance the structural resistance against the progressive collapse mechanism and eventually, the value of damage can be controlled and minimized in similar buildings.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.25-30
• /
• 1994

A vector algorithm for calculating the stiffness matrices of reinforced concrete shell elements is presented. The algorithm is based on establishing vector lengths equal to the number of elements. The computational efficiency of the proposed algorithm is assessed on a Cray Y-MP supercomputer. It is shown that the vector algorithm achieves scalar-to-vector speedup of 1.7 to 7.6 on three inelastic problems.