$\beta$-SiC와 AIN의 혼합분말로부터 열간가압소결에 의하여 고밀도의 SiC-AIN 고용체가 $1870^{\circ}C$에서 $2030^{\circ}C$ 사이의 온도범위에서 제조되어졌다. 온도와 SiC/AIN의 비 및 seed의 존재에 따라 AIN과 $\beta$-SiC(3C) 분말의 반응은 2 H (wurzite) 구조로의 전이를 나타내었다. 결정상들은 SiC-rich 및 AIN-rich 고용체로 구성되었다. $2030^{\circ}C$, 1시간에서 5 wt%의 $\alpha$-SiC seed를 첨가한 50 % AIN/50% SiC의 조성에 대하여 완전한 고용체가 얻어졌으며, 미세구조가 비교적 균일한 2 H상의 결정립 크기를 가지고균일한 성장경향을 나타내었다. SiC-AIN 고용체에 있어서 $\alpha$-SiC seed의 변수가 전이기구 및 결정립의 크기와 모양을 비롯한 결정립 크기의 분포, 조성의 불균일성과 구조적 결함 등에 영향을 미칠 수 있었다.
Background: The purpose of this study was to realize the relations between gluteus medius, tensor fascia lata of pelvic muscles and functional leg length in women's university students. This study is examined the change of electromyographic activation on gluteus medius and tensor fascia lata according to the leg length discrepancy. Methods: All of the female of freshman and sophomore in 'D'college were gathered and separated fourteen of healthy women in two groups by functional leg length discrepancy. and The subjects divided into two groups that the difference with less than 2cm or more would have structural defects by tapeline. The electromyographic activation on the gluteus medius and tensor fascia lata muscles were recorded by surface electrodes at maximal voluntary isometric contraction (MVIC) during lunge posture. The collected datas were analyzed using Independent t-test with SPSS win19.0. Results: In intergroup comparison of electromyographic activation levels for gluteus medius and tensor fascia lata in short or long leg, the influence of electromyographic activation on tensor fascia lata is shown to be more statically higher than gluteus medius according to functional leg length discrepancy in coeds. Even though both muscles are shown to be statistically higher in comparison of electoromyographic activation levels for tensor fascia lata and gluteus medius between short leg and long leg in Group I, Differences of electoromyographic activation levels for tensor fascia lata is shown to be statistically higher than gluteus medius. Conclusion: Through this study, we realized that tensor fascia lata than the long leg, and also, tensor fascia lata is significantly effective for functional leg length discrepancy than gluteus medius. It leads to pelvic lateral instability. This means that cause tensor fascia lata to have a leg length discrepancy.
Images of microcalcification specks showed large variation in conventional radiographs of phantoms which are approved for mammography image quality standard by the American College of Radiology (ACR). This kind of variation is not appropriate for image quality standards because the number of specks are visually counted in images and that number is important in image quality evaluation. Our study using synchrotron radiation (SR) imaging revealed the overlapping of micro-sized air bubble(s) to some specks, and also the structural deformation or crackings. Eight phantoms approved by ACR from two different makers and an air-bubble phantom were examined. SR imaging was performed at a synchrotron radiation facility, SPring-8, in Japan. The image-detector was a fluorescent-screen optical-lens coupling system using a CCD camera with a spatial resolution of 6 $\square$m. Objects when imaged with longer sample-to-detector distance show edge enhancement due to a difference in refraction indices, that is refraction enhancement. Refraction-enhanced SR images revealed that some of specks carried foreign objects, which were proven to be air. In phantoms provided by one maker, attaching/overlapping airs were observed for 62 out of 150 specks (41%) , with a higher incidence for the smallest specks. A speck becomes hardly visible in a conventional radiograph when air(s) overlaps the majority part of a speck, though depending on the size of the air-inclusion and on its configuration. Those airs might have been adsorbed on a speck surface before being embedded and then introduced into the matrix together with specks. Our study using SR imaging has clearly shown the nature of defects in some mammography phantoms which seriously degrade the quality as an image standard.
Purpose: With feasibility in the diagnoses of congenital heart disease (CHD) in the antenatal period, we suspect changes have occurred in its incidence. No data have been reported about the current incidence of simple forms of CHD in Korea. We have attempted to assess the recent incidence and characteristics of CHD in the neonatal care unit of a secondary referral medical center. Methods: Medical records of 497 neonatal care unit patients who underwent echocardiography in the past 5 years were reviewed. Preterm infants with patent ductus arteriosus and other transient, minimal lesions were excluded from this study. Results: Although the number of inpatients remained stable, the incidence of simple forms of CHD showed a gradual decrease over the 5-year study period; a markedly low incidence of complex forms was seen as well. CHD was observed in 3.7% full-term and 6.8% pre-term infants. CHD was observed in 152 infants weighing >2,500 g (3.5% of corresponding birth weight infants); 65 weighing 1,000 to 2,500 g (9.3%); and 6 weighing <1,000 g (8.0%). The incidence of CHD was higher in the pre-term group and the low birth weight group than in each corresponding subgroup (P<0.001); however, the incidence of complex CHD in full-term neonates was high. The number of patients with extracardiac structural anomalies has also shown a gradual decrease every year for the past 5 years. Conclusion: Findings from our study suggest that the recent incidence and disease pattern of CHD might have changed for both complex and simple forms of CHD in Korea.
우수한 전기화학적 특성을 갖는 $LiN_{0.8}Co_{0.2}O_2$ 정극 활물질을 평균 $1{\mu}m$ 이하의 균일한 입자 분포를 얻을 수 있는 액상 반응법의 하나인 졸겔법을 이용하여 제조하였다. 제조된 $LiN_{0.8}Co_{0.2}O_2$를 X선 회절과 TEM(transmission electron microscopy)분석을 통하여 미세구조를 분석하였다. 충방전 실험전과 실험후의 미세구조의 변화에 중점을 주어 실험하였으며, 그 결과 졸겔법으로 제조된$LiN_{0.8}Co_{0.2}O_2$ 정극 활물질은 높은 가역 용량을 가지며 뛰어난 싸이클 특성을 가지고 있다 이는 졸겔법으로 제소함으로 인하여 Ni과 Co양이온의 균일한 화학조성을 가지고 있기 때문이라 생각된다. 특히 $LiCoO_2$에서 관찰되었던 cubic spinel disordering과 심각한 구조적 결함이 관찰되지 않았다. 또한 Al 치환으로 인하여 싸이클 특성을 좋아졌지만 용량은 감소하였다.
Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.
비파괴시험(NDT)은 구조물의 기능에 손상을 주지 않으면서 콘크리트에 대한 많은 정보를 준다. 여러 가지 NDT 방법들 중에서, 초음파 속도법과 충격반향기법과 같이 탄성파의 속도를 이용하는 방법은 콘크리트의 압축강도, 탄성계수, 포아송비의 추정뿐만 아니라, 내부 미세구조 변화 모니터링과 결함 탐지 등을 위해 이용되고 있다. 본 연구에서는 물-결합재비가 $0.27{\sim}0.50$이고 시멘트 중량의 20%를 플라이 애쉬로 대체 사용한 콘크리트를 제조한 후, 동일한 콘크리트에 대해 초음파 속도법과 충격반향기법을 이용하여 종파 속도를 각각 측정하여 서로 비교하였다. 실험 결과, 콘크리트 공시체로부터 측정된 초음파 속도가 충격반향기법에 의해 측정된 종파 속도, 즉 막대파 속도보다 큰 경향을 나타내었으며, 이들의 차이는 재령이 증가함에 따라 그리고 콘크리트의 강도가 커질수록 각각 감소하는 경향을 나타내었다. 또한, 동포아송비, 정탄성계수, 동탄성계수, 속도-강도의 상관관계 등을 실험적으로 결정하였다. 그 결과, 동적인 방법으로 결정되는 포아송비와 탄성계수가 정적인 시험에 의한 것보다 크게 나타났다. 따라서, 탄성파 속도를 이용하여 콘크리트의 성질들을 보다 정확하게 추정하기 위해서는 속도 특성에 대한 이해가 필요할 것으로 사료된다.
산화처리 탄소로부터 상분해시킨 코크스의 구조 및 전기화학적 특성을 조사하였고, KOH 활성화 코크스와 비교하였다. $NaCLO_3$/니들 코크스의 비율이 7.5 이상의 조건에서 산화처리를 행한 graphene 층간 구조를 가진 니들 코크스($d_{002}=3.5{\AA} $)는 산화흑연 구조로 상변화가 일어나고, 이 때 산소함량의 증가와 함께 층간 간격은 $6.9{\AA} $으로 증가하였다. 산화처리 탄소를 $200^{\circ}C$에서 열처리 건조를 하면 상분해가 일어나서 다시 graphene 층간 구조로 복원하고, 층간 간격은 $3.6{\AA} $으로 감소하였다. 그러나, KOH 활성화 과정에서 니들 코크스의 층간 변화는 관찰되지 않았다. 한편, 1차 충전에서 전해질 이온들에 의한 상분해 코크스에의 침입은 1.0 V에서 일어나고, 이는 KOH 활성 코크스보다 작은 수치이다. 상분해 코크스를 이용한 커패시터 셀은 1 kHz에서 $0.57{\Omega}$의 내부저항을 나타내고, 2 전극 시스템에서 0~2.5 V 범위 내에서 측정한 상분해 코크그의 중량 또는 전극 부피 당 용량은 각각 30.3 F/g과 26.9 F/mL을 나타내었고, 이들 특성은 KOH 활성 코크스보다 우수하였다. 상분해 코크스의 우수한 전기화학적 특성은 산화처리-상분해 과정에서의 층간 팽창-수축에 따른 층간 결함과 관련 있는 것으로 판단된다.
(Bi,La)$Ti_3O_{12}$(BLT) thin film is one of the most attractive materials for ferroelectric random access memory (FRAM) applications due to its some excellent properties such as high fatigue endurance, low processing temperature, and large remanent polarization [1-2]. The authors firstly investigated and reported the damascene process of chemical mechanical polishing (CMP) for BLT thin film capacitor on behalf of plasma etching process for fabrication of FRAM [3]. CMP process could prepare the BLT capacitors with the superior process efficiency to the plasma etching process without the well-known problems such as plasma damages and sloped sidewall, which was enough to apply to the fabrication of FRAM [2]. BLT-CMP characteristics showed the typical oxide-CMP characteristics which were related in both pressure and velocity according to Preston's equation and Hernandez's power law [2-4]. Good surface roughness was also obtained for the densification of multilevel memory structure by CMP process [3]. The well prepared BLT capacitors fabricated by CMP process should have the sufficient ferroelectric properties for FRAM; therefore, in this study the electrical properties of the BLT capacitor fabricated by CMP process were analyzed with the process parameters. Especially, the effects of CMP pressure, which had mainly affected the removal rate of BLT thin films [2], on the electrical properties were investigated. In order to check the influences of the pressure in eMP process on the ferroelectric properties of BLT thin films, the electrical test of the BLT capacitors was performed. The polarization-voltage (P-V) characteristics show a decreased the remanent polarization (Pr) value when CMP process was performed with the high pressure. The shape of the hysteresis loop is close to typical loop of BLT thin films in case of the specimen after CMP process with the pressures of 4.9 kPa; however, the shape of the hysteresis loop is not saturated due to high leakage current caused by structural and/or chemical damages in case of the specimen after CMP process with the pressures of 29.4 kPa. The leakage current density obtained with positive bias is one order lower than that with negative bias in case of 29.4 kPa, which was one or two order higher than in case of 4.9 kPa. The high pressure condition was not suitable for the damascene process of BLT thin films due to the defects in electrical properties although the better efficiency of process. by higher removal rate of BLT thin films was obtained with the high pressure of 29.4 kPa in the previous study [2].
본 연구에서는 물리적 강도가 강한 천연 고분자인 박테리아 셀룰로오스(BC)를 기반으로 전기적 성질이 매우 뛰어난 그래핀을 결합시켜 터치 스크린과 같은 투명 전도성 필름을 제조할 수 있는 가능성을 확인하고자 한다. 그래핀을 BC와 결합하기 위해서 라디오파의 인가강도와 처리시간을 달리하여 상온에서 산소 플라즈마 처리를 통해 표면을 개질시켰다. 개질된 그래핀의 물에 대한 접촉각이 $130^{\circ}$에서 $12^{\circ}$로 매우 작아진 것으로 친수성이 향상되었다. 또한, XPS분석에서는 graphene 처리 전 산소함유량 2.99%에서 10.98%로 크게 증가하였다. 그래핀의 손상은 Raman 분석에서 $I_D/I_G$ 비로 정도를 알 수 있다. 처리 전 $I_D/I_G$ 비가 0.11로 손상 정도가 가장 낮았고, 처리 후 0.36~0.43으로 처리 전에 비해 그래핀의 구조적 결함이 증가하였다. 용해시킨 BC에 그래핀을 0~0.04 wt% 첨가하여 제조한 막의 XRD 분석에 의하면 BC막과 plasma 처리된 graphene이 함유된 결합막이 동일한 $2{\theta}$로서 화학적으로 잘 결합되었음을 확인하였다. 이는 SEM 이미지에서 BC와 그래핀의 결합 상태를 확인한 것과 일치하였다. FT-IR 분석에서 플라즈마 처리한 그래핀이 함유된 결합막의 1,000~1,300 $cm^{-1}$ (C=O)에서의 피크가 커진 것으로 보아 plasma 처리된 graphene에서 산소기가 생성되었음을 알 수 있었다. 이와 같은 결과로부터 BC의 물리적인 강점을 기반으로 하여 그래핀을 결합시킨다면 신규의 투명 전도성 소재를 개발할 수 있으리라 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.