• Structural Engineering and Mechanics
• /
• 제37권6호
• /
• pp.617-632
• /
• 2011

A concept of crash energy absorbing (CEA) lattice structure for an inflatable morphing vehicle body (Lee et al. 2008) has been investigated as a method of providing rigidity and energy absorption capability during a vehicular collision (Lee et al. 2007). A modified analytical model for the CEA lattice structure design is described in this paper. The modification of the analytic model was made with a stiffness approach for the elastic region and updated plastic limit analysis with a pure plastic bending deformation concept and amended elongation factors for the plastic region. The proposed CEA structure is composed of a morphing lattice structure with movable thin-walled members for morphing purposes, members that will be locked in designated positions either before or during the crash. What will be described here is how to model the CEA structure analytically based on the energy absorbed by the CEA structure.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.46-51
• /
• 2014

2,097 deaths out of 5,229 by traffic accident occurred by vehicle to vehicle crash and 855 deaths out of 2,097 occurred at side crash in 2011. Korean government adopted New Car Assessment Program to reduce the wounded and deaths at traffic accident in 1999 and side impact test has been added in 2003. 43 out of 53 vehicles tested in NCAP side impact rated 4 and 5 stars means the highest occupant protection. In this study three small class vehicles have been tested according to Insurance Institute for Highway Safety's side crashworthiness test protocol. IIHS test protocol uses 1,500kg moving barrier rather than NCAP's 950kg and the occupant protection rated Good, Acceptable, Marginal and Poor based on injury measure, structural integrity and head protection.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.369-386
• /
• 2005

Various aspects of structural optimization techniques under transient loads are extensively reviewed. The main themes of the paper are treatment of time dependent constraints, calculation of design sensitivity, and approximation. Each subject is reviewed with the corresponding papers that have been published since 1970s. The treatment of time dependent constraints in both the direct method and the transformation method is discussed. Two ways of calculating design sensitivity of a structure under transient loads are discussed - direct differentiation method and adjoint variable method. The approximation concept mainly focuses on re- sponse surface method in crashworthiness and local approximation with the intermediate variable Especially, as an approximated optimization technique, Equivalent Static Load method which takes advantage of the well-established static response optimization technique is introduced. And as an application area of dynamic response optimization technique, the structural optimization in flexible multibody dynamic systems is re- viewed in the viewpoint of the above three themes

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.360-363
• /
• 2007

This paper deals with the dynamic tensile characteristics of the steel sheets for structural members of a train. Train accidents occurs rarely but lead to many casualties and economical loss. Therefore the safety of the train becomes important during the train crash. The dynamic tensile characteristics of the steel sheets are indispensable to analyze the structural crashworthiness. Current research reports the stress-strain curves, fracture elongation and strain rate sensitivities evaluated at the various strain rates especially for SUS304L-ST and SUS304L-LT steel sheets. The results include the difference in the dynamic tensile characteristics of both rolling and transverse directions. Dynamic tensile tests were performed at the strain rates ranging from 0.003/sec to 200/sec using High Speed Material Testing Machine. The materials tested in this research shows interesting behavior at the low strain rates. The strain hardening exponent decreases remarkably while the yield strength increases.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.411-420
• /
• 2019

It is essential to design crashworthy marine structures for operations in Arctic regions, especially ice-covered waters, where the structures must have sufficient capacity to resist iceberg impact. In this study, a numerical analysis of a colliding accident between an iceberg and stiffened plates was carried out employing the commercial finite element code ABAQUS/Explicit. The ice material model developed by Liu et al. (2011) was implemented in the simulations, and its availability was verified by performing some numerical simulations. The influence of the ambient temperature on the structural resistance was evaluated while the local stress, plastic strain, and strain energy density in the structure members were addressed. The present study revealed the risk of fracture in terms of steel embrittlement induced by ambient temperature. As a result, the need to consider the possibility of brittle failure in a plate-stiffener junction during operations in Arctic regions is acknowledged. Further experimental work to understand the structural behavior in a plate-stiffener junction and HAZ is required.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.120-127
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulations. During a few decades, the great effort has been made by the international Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study aims for investigating a complicated structural response of bow structures of simplified models and oil carriers for assessing the energy dissipation and crushing mechanics of the striking vessels through a methodology of the numerical analysis for the various models and its design changes. Through these study an optimal bow construction absorbing great portion of kinetic energy at the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of collision simulation procedures have been performed step by step as follows; 1) 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in four conditions. 2) 21 models consisted of 5 sizes of the full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3) 36 models of 100l oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary members, framing system and colliding conditions, etc. By the first study using simplified models the response of the bow collision is synthetically evaluated for the parameters influencing to the absorbed energy, penetration depth and impact force, etc.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.119-126
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulation. During a few decades, the great effort has been made by International Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study is aimed at investigating a complicated structural response of bow structures of oil carriers for assessing the energy dissipation and crushing mechanics of striking vessel through a methodology of the numerical analysts for the various models and its design changes. Through this study an optimal bow construction absorbing great portion of kinetic energy in the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of response analysis procedures are performed as follows; 1). 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in two conditions. 2). 21 models conisted of 5 size of full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3). 36 models of 100k oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary mombers, framing system and colliding conditions, etc.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.843-850
• /
• 2020

본 연구의 목적은 국내 위험물 운송용 탱크화차의 충돌안전설계 가이드라인 제안을 위해 해외 충돌안전 기준에 따른 국내 위험물 운송화차에 대하여 비선형 충돌해석을 하여 위험성을 평가하고, 구조적 취약부를 분석하는데 있다. 유럽의 EN 12663-2에서 규정하는 화차의 완충시험 및 북미 49CFR179에서 규정하는 탱크 펑크시험기준을 분석하였으며, 상용 유한요소 해석 솔버인 LS-DYNA를 이용하여 각각 기준에 따른 비선형 유한요소모델을 모델링하였다. EN 규격의 완충시험 해석결과 충돌속도 6 km/h 이하에서는 소성변형이 발생하지 않을 것으로 예측하였지만, 8 km/h 이상의 충돌속도에서 중앙연결기를 통한 하중 전달으로 차체의 센터실 후방 및 탱크 중앙 지지부에서 소성변형을 확인하였다. 북미 법규의 탱크 펑크시험 해석결과 국내 탱크화차는 두부 충돌모드에서 충돌차량의 운동에너지를 4 % 이상 흡수시 두부의 코너부에서 탱크 외벽의 파괴가 발생하였으며, 측면 충돌모드에서 운동에너지 30 % 이상 흡수시에 충격체가 접촉하는 탱크 외벽의 파괴가 발생하여 내부 적재물의 누출을 예상하였다. 국내 유류 운송용 탱크화차의 해외 충돌안전 기준의 만족을 위해서는 차체 구조보강 설계 및 탱크 방호설계 수준을 향상시킬 필요가 있다.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.521-530
• /
• 2011

항공기 기체와의 체결부위가 많은 연료탱크는 체계연관성이 큰 대표적인 핵심 구성품 중의 하나로 다루어져 왔다. 회전익항공기에 광범위하게 적용되고 있는 내충격성 연료탱크는 항공기 추락 시 탑승자의 생존성 향상에 크게 기여하고 있다. 미육군에서는 항공기 추락 후 화재에 의한 인명손실을 원천적으로 방지하기 위해 군용 회전익기 역사의 초기 단계부터 연료탱크 고유의 내충격성에 관련된 군사규격을 제정하여 적용해 왔다. V-22 등의 잘 알려진 사례에 따르면 미군사규격(MIL-DTL-27422D)에서 요구하고 있는 연료탱크 충돌충격시험을 원활하게 통과하지 못하는 경우, 해당 연료탱크가 장착되는 항공기 자체의 개발일정에 심각한 지장을 초래한다. 연료탱크 충돌충격시험은 시편자체의 제작비용 및 준비기간이 상당히 소요되므로, 설계 초기단계부터 충돌충격시험에 대한 일련의 수치적 모사(numerical simulation)를 통해 실물에 의한 시행착오의 가능성을 최소화해야 한다. 본 연구에서는 충돌모사 프로그램인 Autodyn을 이용하여 연료탱크 충돌충격시험에 대한 수치적 모사를 수행하였으며, 그 결과로 구해진 등가응력 및 내부압력 평가를 통해 회전익항공기용 연료탱크의 내충격 성능을 고려한 설계방향을 제시하였다.

• 한국전산구조공학회논문집
• /
• 제25권1호
• /
• pp.51-56
• /
• 2012

회전익 항공기에 광범위하게 적용되고 있는 내충격성 연료셀은 항공기 추락 시 탑승자의 생존성 향상에 크게 기여하고 있다. 미육군에서는 항공기 추락 후 화재에 의한 인명손실을 원천적으로 방지하기 위해 군용 회전익기 역사의 초기 단계부터 연료셀 고유의 내충격성에 관련된 군사규격을 제정하여 적용해 왔다. 국외 전문제작 업체들은 장기간의 경험에 의존하여 연료셀을 개발하고 있으며, 충돌충격시험에 따른 시행착오의 결과를 설계 및 제작과정에 재반영하고 있다. 이러한 연료셀 충돌충격시험은 시편자체의 제작비용 및 준비기간이 상당히 소요되므로, 설계 초기단계부터 충돌충격시험에 대한 일련의 수치적 모사를 통해 실물에 의한 시행착오의 가능성을 최소화해야 한다. 본 연구에서는 충돌모사 프로그램인 Autodyn으로 연료셀 충돌충격시험에 대한 다수의 수치해석을 수행, 등가응력 분석을 통해 적절한 설계변수를 선정하였다. 또한 인공신경망과 모의풀림 방법을 연동시켜 연료셀 형상을 내충격성능 측면에서 최적화하였다.