• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.191-191
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.189-189
• /
• 2009

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.228-234
• /
• 2002

We report theoretical investigation on the polarization selective coupling characteristics of a side-polished fiber directional coupler with a thin metal interlayer. Based on normal mode theory the coupling properties of the device under various structural conditions are analyzed. It is shown that the coupling strength between TE modes weakens rapidly with increase or metal interlayer thickness, whereas that between TM modes becomes stronger. The design conditions of the polarization splitter using the coupler to achieve high extinction ratio and low insertion loss are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.569-571
• /
• 2008

The structural and optical properties on $Bi^{3+}$ addition in (Y,Gd)(V,P)$O_4:Eu^{3+}$ red phosphor were investigated. With the addition of $Bi^{3+}$, the band edge in excitation spectrum shifts toward longer wavelength region, resulting in remarkable enhancement of the red emission intensity at 619 nm.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.679-681
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.67-68
• /
• 2006

We prepared the AZO thin film with different $O_2$ gas flow rate. the AZO thin films were deposited on glass substrate at room temperature, working gas pressure of 1mTorr. the electrical, structural and optical properties of AZO thin films were investigated by using Hall Effect measurement system, X-ray Diffractometer (XRD) and UV-VIS spectrometer. From the results, we could obtain that AZO thin film with low resistivity of $8.5{\times}10^{-4}{\Omega}cm$ was exhibited in specific $O_2$ gas flow rate. Also, the transmittance of over 80% in visible range was observed in specific $O_2$ gas flow rate. In all of the AZO thin film with the transmittance of over 80%, diffraction peak of (002) direction was observed, while amorphous peak was observed in the AZO thin film with the low transmittance.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1856-1858
• /
• 2005

In this study, Indium Tin Oxide(ITO) thin films were prepared at $O_2$ gas 0.2 sccm, no heating to substrate and working pressure 1mTorr with varying deposition time. We estimated structural, optical, electrical characteristics of ITO thin films as function of ITO thin films thickness. As a result, XRD peaks increased with increasing the thickness. The ITO thin film was fabricated with resistivity $4.23{\times}10^{-4}[{\Omega}{\cdot}cm]$, carrier mobility $52.9[cm^2/V{\cdot}sec]$, carrier concentration $2.79{\times}10^{20}[cm^{-3}]$. And we also observed that the SEM images of ITO thin films surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.164-164
• /
• 2010

Cds films were deposited on glass substrates using rf magnetron sputtering method followed by rapid thermal annealing(RTA). Effects of annealing temperature on surface characteristic, structural, electrical and optical property of CdS films were investigated at different temperatures ranging from 250 to $550^{\circ}C$ with various holding time. The film annealed at $450^{\circ}C$ with less than 1 min holding time is attributed to the improved crystalline quality of CdS film due to the effective relaxation of residual compressive stress and achieving maximum grain size. The results show that RTA treatments under optimal annealing condition can provide significant improvements in the properties of CdS films.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.571-575
• /
• 2017

In this study, cadmium telluride (CdTe) quantum dots were synthesized by using ultrasonic irradiation method. Optical properties and structural characteristics of the CdTe quantum dots were analyzed by two main variables; the ratio of the precursor and the synthesis time. As the synthesis time increased, the band gap reduction was observed with the growth of CdTe quantum dots. As for the luminescence properties, the red shift appeared at 510~610 nm wavelength range. Also, it was confirmed that the red shift occurs rapidly as the ratio of Te increases. According to PL peak intensity, the highest intensity was shown at 180 to 240 min. Structural characteristics of CdTe quantum dots were investigated through XRD and TEM, and the cubic zinc blend structure was observed. The size of quantum dots was about 2.5 nm and uniformly dispersed when the synthesis time took 210 min. In addition, the apparent crystallinity was discovered in FFT image.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.158-163
• /
• 2011

$CuInS_2$ thin films were prepared using a sol-gel spin-coating method. That makes large scale substrate coating, simple equipment, easy composition control available. The structural and optical properties of $CuInS_2$ thin films that include less toxic materials (S) instead of Se, tetragonal chalcopyrite structure. Copper acetate monohydrate ($Cu(CH_3COO)_2{\cdot}H2O$) and indium acetate ($In(CH_3COO)_3$) were dissolved into 2-propanol and l-propanol, respectively. The two solutions were mixed into a starting solution. The solution was dropped onto glass substrate, rotated at 3000 rpm, and dried at $300^{\circ}C$ for Cu-In as-grown films. The as-grown films were sulfurized inside a graphite container box and chalcopyrite phase of $CuInS_2$ was observed. To determine the optical properties measured optical transmittance of visible light region (380~770 nm) were less than 30 % in the overall. The XRD pattern shows that main peak was observed at Cu/In ratio 1.0 and its orientation was (112). As annealing temperature increases, the intensity of (112) plane increases. The unit cell constant are a = 5.5032 and c = 11.1064 $\AA$, and this was well matched with JCPDS card. The optical transmittance of visible region was below than 30 %.