• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.286-290
• /
• 2006

A genomic library of Streptococcus vestibularis ATCC49124 was constructed in an E. coli plasmid vector, and the urease-positive transformants harboring the urease gene cluster were isolated on Christensen-urea agar plates. The minimal DNA region required for urease activity was located in a 5.6 kb DNA fragment, and a DNA sequence analysis revealed the presence of a partial ureI gene and seven complete open reading frames, corresponding to ureA, B, C, E, F, G, and D, respectively. The nucleotide sequence over the entire ure gene cluster and 3'-end flanking region of S. vestibularis was up to 95% identical to that of S. salivarius, another closely related oral bacterium, and S. thermophilus, isolated from dairy products. The predicted amino acid sequences for the structural peptides were 98-100% identical to the corresponding peptides in S. salivarius and S. thermophilus, respectively, whereas those for the accessory proteins were 96-100% identical. The recombinant E. coli strain containing the S. vestibularis ure gene cluster expressed a high level of the functional urease holoenzyme when grown in a medium supplemented with 1 mM nickel chloride. The enzyme was purified over 49-fold by using DEAE-Sepharose FF, Superdex HR 200, and Mono-Q HR 5/5 column chromatography. The specific activity of the purified enzyme was 2,019 U/mg, and the Michaelis constant ($K_{m}$) of the enzyme was estimated to be 1.4 mM urea. A Superose 6HR gel filtration chromatography study demonstrated that the native molecular weight was about 196 kDa.

• Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.71-78
• /
• 2013

Subcritical water hydrolysis was carried out in a batch reactor to produce valuable materials, such as low-molecular weight (MW) peptides and essential amino acids with antioxidant properties, from heat-dried squid viscera. Hydrolysis of squid viscera was performed at 160 to $280^{\circ}C$ for 3 min. The yield was increased by increasing the temperature and pressure, while the protein content of squid viscera hydrolysate decreased with increasing temperature. Low-MW peptides were detected in all hydrolysates by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The highest yields of free and structural amino acids in heat-dried squid viscera hydrolysate were at $160^{\circ}C$ and were $411.95{\pm}1.15$ and $346.62{\pm}1.25$ mg/100 g, respectively. All essential amino acids were detected in viscera hydrolysates; leucine was the most abundant. Antioxidant activities of hydrolysates were highest at $220^{\circ}C$. Greater than $98{\pm}0.26%$ of the ABTS antioxidant activity was retained in hydrolysates after long-term heat treatment.

• The Journal of Korean Physical Therapy
• /
• v.10 no.2
• /
• pp.149-159
• /
• 1998

Normal lumbar vertebrae function only when soft tissues are in position, constituting vertebral body, discs and facet feints. Considering the mechanism of supporting bodily weight, the widest movement of vertebral column reaches a lumbar sacral joint to cause structural changes. The feet is proved that lumbago is the damage of lumbar vertebrae accompanied with the change of soft tissues surrounding lumbar vertebrae, rather than simple pain in a certain lesion. It is based on the mechanism of vertebral body and intervertebral discs in the anatomical structure of the lumbar region. In my opinion, it is necessary to prove more accurately the cause of lumbago, escaping from the conventional cause of the abnormality of disc.

• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.236-244
• /
• 2009

In response to growing environmental and collision-safety concerns, the automotive industry has gradually used high-strength and ultla-high-strength steels to reduce the weight of automobiles. In order to overcome inherent process disadvantages of these materials such as poor formability and high springback at room temperature, hot forming has recently been developed and adopted to produce some important structural parts in automobiles. This method enables manufacturing of components with complex geometric shapes with minimal springback. In addition, a quenching process may enhance the material strength by more than two times. This paper investigates mechanical and forming characteristics of high-strength boron-alloyed steel with hot forming, in terms of hardness, microstructure, residual stress, and springback. In order to compare with experimental results, a finite element analysis of hot forming process coupled with phase transformation and heat transfer was carried out using DEFORM-3D V6.1 and also, to predict high temperature mechanical properties and flow curves for different phases, a material properties modeler, JMatPro was used.

• Transactions of Materials Processing
• /
• v.19 no.7
• /
• pp.411-415
• /
• 2010

A sandwich panel which is comprised of truss cores faced with solid face sheets is lightweight and multi-functional. So it is widely used to not only structural material but also heat transfer media in transportation field such as airplane, train and vessel. There are various core topologies such as pyramidal and tetrahedral truss, square honeycombs and kagome truss. The study focused on analytical approach to optimize compression and shear quality of the unit cell of PCM with pyramidal configuration. With various unit cell models which have the same core weight per unit area but different truss member angle, analytical solution for effective stress ($\bar{\sigma},\bar{\tau}$), peak stress ($\bar{\sigma}_{peak},\bar{\tau}_{peak}$) by yielding and buckling, relative density ($\bar{\rho}_c$) and effective stiffness ($\bar{E},\bar{G}$) have been computed and compared each other. With this approach, the most optimal core configuration was predicted. The result has become the efficient guidelines for the design of PCM core structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.373-374
• /
• 2006

This study is carried out to analyze the stability of a container crane in according to the change of a wind direction and a machinery house location when a wind load of a wind velocity, 75m/s was applied on the state stowing a container crane by a heavy wind. A design wind load applied to this study was calculated in observance of 'Load Criteria of Building Structure'. And we analyzed the reactions of each supporting points according to appling a wind direction to an interval of $10^{\circ}\;in\;0^{\circ}{\sim}180^{\circ}$ and the structure stability of a container crane according to changing a machinery house. location occupying 15% of a container crane weight. From a results of this study, we presented a design criteria of an overturning disturbance equipment, tie-down.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.132-132
• /
• 2009

To achieve the commercialization of PEM fuel cell, the durability problem must be solved. Recently, many researchers have focused on this durability problem and degradation studies about membrane and electrode have been reported. But durability characteristics of gas diffusion layer is not much reported yet. Durability of GDL is very important to maintain the performance of PEM fuel cell because the main function of GDL is a path of fuel and water and the GDL degradation causes the loss of the GDL function. In this study, the degradation of GDL, especially, the mechanical degradation process was investigated with the leaching test. The effect of water dissolution was observed through the test and the amount of GDL degradation was measured with various measurement methods such as weight measurement, static contact angle measurement, scanning electron microscope. After 2,000 hours test, the GDL showed structural damage and loss of hydrophobicity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1032-1038
• /
• 2002

The Active Constrained Layer Damping(ACLO) combines the simplicity and reliability of passive damping with the low weight and high efficiency of active control to attain high damping characteristics. The proposed ACLD treatment consists of a viscoelastic damping which is sandwiched between an active piezoelectric layer and a host structure. In this manner, the smart ACLD consists of a Passive Constrained Layer Damping(PCLD) which is augmented with an active control in response to the structural vibrations. The Arc type shell model is introduced to describe the interactions between the vibrating host structure, piezoelectric actuator and visco damping, The system is modeled by applying ARMAX model and changing a state-space form through the system identification method. An optimum control law for piezo actuator is obtain by LQR(Linear Quadratic Regulator) Method. The performance of ACLD system is determined and compared with PCLD in order to demonstrate the effectiveness of the ACLD treatment, Also, the actuation capability of a piezo actuator is examined experimentally by using various thickness of Viscoelastic Materials(VEM).

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.860-865
• /
• 2010

This study was conducted to evaluate the baking characteristics of yellow layer cake containing chlorella powder. Chlorella at concentrations of 0, 4, 8, 12, and 16%(w/w) wheat powder were added, after which we evaluated the baking characteristics, physical properties, and sensory properties of the resulting cakes. Regarding the weight and volume of the cakes, the treatment groups were similar. However, control showed a high hardness value while 16% chlorella added cake showed a significantly low value. The 4% and 8% chlorella added groups maintained their structural condition while the 12% and 16% chlorella added groups were softer depending on the protein content of the flour, Lightness(L value) and yellowness(b value) of the cake crumbs became lower depending on the concentration of chlorella, whereas redness(a value) decreased. In the sensory test, the acceptability scores of the 12% and 16% chlorella added groups were lower compared to control while the 4% and 8% chlorella added groups had higher scores. Therefore, chlorella powder added yellow layer cake exhibited more functionality as well as higher quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.1
• /
• pp.97-105
• /
• 2015

Recently, there have been many researches about applications of origami to mechanical engineering, which realizes a 30 sturcture by folding a 20 plane material. With this simple manufacturing process, origami was even adopted by some roboticists as a way to build an entirely new robot with benefits in terms of cost, weight, and structural simplicity In this paper, we propose a new type of a walking robot based on origami structure. Because all the components of the robot that generate gait motion are mechanically connected, it can actually walk fotward with only a single actuator. We also showed the similarity of gait trajectories between a kinematic analysis and the actual gait motion measured by video tracking. This result proved the possibility of designing an origami-based robot with the identical gait trajectory as we plan.