• Title/Summary/Keyword: Structural Weight

Search Result 2,484, Processing Time 0.027 seconds

Biological Pretreatment of Softwood Pinus densiflora by Three White Rot Fungi

  • Lee, Jae-Won;Gwak, Ki-Seob;Park, Jun-Yeong;Park, Mi-Jin;Choi, Don-Ha;Kwon, Mi;Choi, In-Gyu
    • Journal of Microbiology
    • /
    • v.45 no.6
    • /
    • pp.485-491
    • /
    • 2007
  • The effects of biological pretreatment on the Japanese red pine Pinus densiflora, was evaluated after exposure to three white rot fungi Ceriporia lacerata, Stereum hirsutum, and Polyporus brumalis. Change in chemical composition, structural modification, and their susceptibility to enzymatic saccharification in the degraded wood were analyzed. Of the three white rot fungi tested, S. hirsutum selectively degraded the lignin of this sortwood rather than the holocellulose component. After eight weeks of pretreatment with S. hirsutum, total weight loss was 10.7%, while lignin loss was the highest at 14.52% among the tested samples. However, holocellulose loss was lower at 7.81 % compared to those of C. lacerata and P. brumalis. Extracelluar enzymes from S. hirsutum showed higher activity of ligninase and lower activity of cellulase than those from other white rot fungi. Thus, total weight loss and changes in chemical composition of the Japanese red pine was well correlated with the enzyme activities related with lignin- and cellulose degradation in these fungi. Based on the data obtained from analysis of physical characterization of degraded wood by X-ray Diffractometry (XRD) and pore size distribution, S. hirsutum was considered as an effective potential fungus for biological pretreatment. In particular, the increase of available pore size of over 120 nm in pretreated wood powder with S. hirsutum made enzymes accessible for further enzymatic saccharification. When Japanese red pine chips treated with S. hirsutum were enzymatically saccharified using commercial enzymes (Cellulclast 1.5 L and Novozyme 188), sugar yield was greatly increased (21.01 %) compared to non-pre treated control samples, indicating that white rot fungus S. hirsutum provides an effective process in increasing sugar yield from woody biomass.

Muscle Activity of Low Back Muscles During Isometric Back Extension Exercises (등척성 신전운동 시 요부근의 근 활성도)

  • Yu, Won-Gyu;Jung, Young-Jong;Lee, Jae-Ho;Kim, Chang-In
    • Physical Therapy Korea
    • /
    • v.8 no.1
    • /
    • pp.76-88
    • /
    • 2001
  • Back extension exercises have been used for rehabilitation of the injured low back, prevention of injury, and fitness training programs. However, excessive loading on low back can exacerbate existing structural weakness. The purpose of this study was to compare muscle activity of low back muscles during back extension exercises. Twenty healthy male subject s were evaluated. Electromyographic (EMG) activities of low back muscles at L1 and L5 level were recorded during seven different back extension exercises and two reference tasks by surface EMG and saved for data analysis. Reference tasks of lifting 20% and 40% of their body weight were included for comparison. The result were as follows: 1) Single-arm extension and single-leg extension exercises on quadruped position appeared to constitute a low-risk exercise for initial extensor strengthening. 2) When arm extension was combined with contralateral leg extension on quadruped position, EMG activities of low back muscles were increased. 3) EMG activity of low back muscles was highest during the trunk extension exercises on prone position. 4) EMG activities of low back muscles during arm and leg extension exercises on quadruped position were less than those of reference task of lifting 40% of their body weight. These result s have important implications for progressive back extensor muscle strengthening exercises in patients with back pain.

  • PDF

Characteristics of the Load of Small Hard Body Used for Impact Resistance Test of the Lightweight Wall (경량벽체의 내충격성 시험에 사용되는 경질 충격체의 하중 특성)

  • Choi, Soo-Kyung;Song, Jung-Hyeon;Kim, Sang-Heon;Lee, Young-Do
    • Journal of the Korea Institute of Building Construction
    • /
    • v.14 no.4
    • /
    • pp.350-358
    • /
    • 2014
  • The demand for the lightweight wall has increased as the structure of the multi-unit dwelling has shift to the rahmen structure. The lightweight wall is required to secure certain degree of shock resistance for the structural safety. The study performed the load analysis test for 7 small hard bodies with different masses and shapes and 5 hard materials which applied the impact load on the wall. It was found out from the experiment that different pendulum weight doubled the load maximum even though the shock energy was the same. In addition, the study compared and analyzed the weight of materials and the load of small hard bodies to propose fundamental data for the material design of the lightweight wall.

Rating of steel bridges considering fatigue and corrosion

  • Lalthlamuana, R.;Talukdar, S.
    • Structural Engineering and Mechanics
    • /
    • v.47 no.5
    • /
    • pp.643-660
    • /
    • 2013
  • In the present work, the capacity ratings of steel truss bridges have been carried out incorporating dynamic effect of moving vehicles and its accumulating effect as fatigue. Further, corrosion in the steel members has been taken into account to examine the rating factor. Dynamic effect has been considered in the rating procedure making use of impact factors obtained from simulation studies as well as from codal guidelines. A steel truss bridge has been considered to illustrate the approach. Two levels of capacity ratings- the upper load level capacity rating (called operating rating) and the lower load level capacity rating (called inventory rating) were found out using Load and Resistance Factor Design (LRFD) method and a proposal has been made which incorporates fatigue in the rating formula. Random nature of corrosion on the steel member has been taken into account in the rating by considering reduced member strength. Partial safety factor for each truss member has been obtained from the fatigue reliability index considering random variables on the fatigue parameters, traffic growth rate and accumulated number of stress cycle using appropriate probability density function. The bridge has been modeled using Finite Element software. Regressions of rating factor versus vehicle gross weight have been obtained. Results show that rating factor decreases when the impact factor other than those in the codal provisions are considered. The consideration of fatigue and member corrosion gives a lower value of rating factor compared to those when both the effects are ignored. In addition to this, the study reveals that rating factor decreases when the vehicle gross weight is increased.

Effects of Dietary Supplementation with Astaxanthin on Histamine Induced Lesions in the Gizzard and Proventriculus of Broiler Chicks

  • Ohh, Mi-hyang;Kim, Seongjin;Pak, Sok Cheon;Chee, Kew-mahn
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.29 no.6
    • /
    • pp.872-878
    • /
    • 2016
  • Astaxanthin (ASX) is a xanthophyll pigment isolated from crustaceans and salmonids. Owing to its powerful antioxidant activity, ASX has been reported to have the potential to protect against gastric ulcers and a variety of other illnesses. Histamine (His) is a dietary factor that causes gastric erosion and ulceration in young chicks. In this study, we examined whether ASX had protective effects on dietary histamine-induced lesions in the gizzard and proventriculus of broiler chickens. Four experimental treatment groups were planned: basal diet (BD), BD+His, BD+ASX, and BD+ASX+His, with four chicks (5 days old) in each group and three replications (i.e., a total of 12 chicks per group). The BD was supplemented with either 0.4% His or 100 ppm ASX. The birds were fed ad libitum for 3 weeks, and diets contained no antimicrobial compounds. Supplementing the diet with His significantly decreased body weight gain, but increased the weights of the gizzard and proventriculus of the chicks as compared with those of chicks in the BD group (p<0.05). ASX did not affect His-dependent changes in chick body weight or weights of the gizzard and proventriculus. The loss of gastric glands in the proventriculus, which was observed in His-treated chicks, was not prevented by ASX administration. The frequency of proventricular ulceration, however, was lowered by treatment with ASX, without significant differences between the two supplementation levels. In conclusion, our data showed that ASX might be helpful for alleviating structural damage to the digestive system in poultry under certain stressful conditions.

Stress Analysis of a Window Cleaning Robot using 3D Modeling and Improvement Plan (3D 모델링을 통한 유리창 청소로봇의 응력해석 및 설계 개선방안 도출)

  • Kim, Kyoon-Tai;Jun, Young-Hun
    • Journal of the Korea Institute of Building Construction
    • /
    • v.18 no.2
    • /
    • pp.161-168
    • /
    • 2018
  • Recently, a prototype of a guide rail type window cleaning robot was developed, and is currently undergoing field testing. The size and the load of the robot have not yet been optimized. In this study, a stress analysis was performed to derive quantitative data to improve the current window cleaning robot and secure its structural safety. Through the analysis of its own weight, resistance to wind speed, and other factors, it was found that the robot can be improved in terms of the drooping caused by its own weight and the drag force against wind pressure. The analysis results obtained will be directly applied to improve the design of the window cleaning robot, and it is expected that this will advance the completeness of the robot's design.

Purification and Characteristics of New Biopolymer Produced by Alkaline-Tolerant Bacillus sp. (알칼리 내성 Bacillus sp.가 생산하는 생물 고분자의 정제 및 특성)

  • Lee, Shin-Young;Won, Suk;Kang, Tae-Su;Lee, Myong-Yurl;Lew, In-Deok;Kim, Jin-Young
    • KSBB Journal
    • /
    • v.13 no.5
    • /
    • pp.554-560
    • /
    • 1998
  • Biopolymer from alkaline-tolerant Bacillus so. was purified, and its physico-chemical and structural properties were investigated. Crude biopolymer, precipitated by acetone from culture broth was fractionated into two fractions by gel chromatography on Sephadex G-200. Among two fractions, one fraction(PS I), which an acidic biopolymer precipitated by the CPC(cetylpyridinium chloride) treatment was studied further. PS I fraction had carboxyl groups and was positive at color reaction of sugar. PS I fraction also showed UV absorbance at 190-225nm. The purified acidic biopolymer was composed of 4% glucose, 8% glucosamine and 88% glutamic acid. Sugar components of the purified acidic biopolymer seemed to be linked to PGA(polyglutamic acid) which existed in the from of ${\gamma}$-peptide bond. By the results of Smith degradation of sugar components, glucose and glucosamine was bound by 1,3 glocosidic linkage. Therefore, this biopolymer was a glycopeptide, oligosaccaride ${\gamma}$-PGA. We concluded that the equivalent weight and the molecular weight of this biopolymer were estimated as about 171 and 5x105 dalton, respectively.

  • PDF

Developing Hollow Carbon Balls by Oxidation of Carbon Blacks

  • Kang, Dong-Su;Kim, Beom-Jun;Lee, Kwang-Ju;Kim, Suk-Hwan;Lee, Sang-Woo;Roh, Jae-Seung
    • Carbon letters
    • /
    • v.14 no.1
    • /
    • pp.55-57
    • /
    • 2013
  • The development of hollow carbon balls by $CO_2$ oxidation of two types of carbon blacks was studied. Super P (SP) and Denka Black (DB) were used for this study. Specific surface area (SSA), structural parameters, and microstructures were examined using Brunauer, Emmett and Teller apparatus, X-ray diffraction spectroscopy, and transmission electron microscope (TEM), respectively. The SSAs of both oxidized carbon blacks increased after oxidation. The SSAs of raw DB and SP were 73 $m^2/g$ and 60 $m^2/g$, respectively. Maximum SSAs of oxidized DB and SP were 152 $m^2/g$ and 253 $m^2/g$, respectively. The $d_{002}$ of DB and SP showed almost no change after oxidation. The Lc of raw DB ($38{\AA}$) and SP ($19{\AA}$) increased with increasing weight loss. The $L_c$ of SP increased up to $254{\AA}$ at 96% weight loss. The SSA increased about twice in DB (148 $m^2/g$) and about four times in SP (254 $m^2/g$) after 3 h oxidation compared with the original carbon blacks. Through TEM observation the outer parts of the oxidized carbon blacks showed a rigid shell structure and the inner parts looked empty. Generally it looked like an angular soccer ball, so we named it 'hollow carbon ball'. It is expected that the hollow carbon ball can be used as catalyst supports.

Effects of Dexamethasone on Embryo Development and Hox Gene Expression Patterns in Mice

  • Kim, Sang-Hoon;Lee, Ji-Yeon;Park, Sung-Joo;Kim, Myoung-Hee
    • Biomedical Science Letters
    • /
    • v.17 no.3
    • /
    • pp.231-238
    • /
    • 2011
  • During pregnancy, stress induces maternal glucocorticoid secretion, which in turn is known to affect structural malformation, retardation of growth, reduced birth weight of the fetus. As Hox genes are master transcription factors which fulfill critical roles in embryonic development, we aimed to explore the possibility that alterations of the Hox gene expression might be involved in stress-induced malformation. The pregnant mice were injected with dexamethasone at a dose of 1 mg/kg or 10 mg/kg on day 7.5, 8.5 and 9.5 p.c. (post coitum), as well as saline as control. Embryos of E11.5 and E18.5 were obtained by sacrificing pregnant animals. Weight and crown-rump length (CRL) were measured. RT-PCR was performed to examine the Hox gene expression levels. Embryos given dexamethasone at day 7.5~9.5 p.c. had small CRL and weighed less both in E11.5 and E18.5. The percentage of embryos showing abnormalities was high in groups received high dose of dexamethasone. To define the molecular basis for abnormal embryonic development, we analyzed the Hox gene expression pattern and found that many Hox genes display altered expression. Effects of prenatal dexamethasone treatment on embryonic development might be associated with the aberrant Hox gene expression.

Dynamic Instability of Submerged Floating Tunnels due to Tendon Slack (긴장재 느슨해짐에 따른 해중 터널의 동적 불안정 거동)

  • Won, Deok Hee;Kim, Seungjun
    • Journal of Korean Society of Steel Construction
    • /
    • v.29 no.6
    • /
    • pp.401-410
    • /
    • 2017
  • This study deals with dynamic instability of a tendon moored submerged floating tunnel (SFT) due to tendon slack. In general, environmental loadings such as wave and current govern SFT design. Especially, the wave force, whose amplitude and direction continuously change, directly induces the dynamic behavior of the SFT. The motion of the floating tube, induced by the wave force, leads dynamic response of the attached tendons and the dynamic change of internal forces of the tendons significantly affects to the fatigue design as well as the structural strength design. When the severe motion of the SFT occurs due to significant waves, tendons might lose their tension and slack so that the floating tube can be transiently instable. In this study, the characteristics of dynamic instability of the SFT due to tendon slack are investigated performing hydrodynamic analysis. In addition, the effects of draft, buoyancy-weight ratio, and tendon inclination on tendon slack and dynamic instability behavior are analytically investigated.