• 한국지진공학회논문집
• /
• 제20권4호
• /
• pp.191-199
• /
• 2016

Piloti-type building is one of typical vertical atypical buildings. These buildings can fail by weak-story or flexible-story mechanism on the first story. They should be designed by taking into account the special seismic load, but those less than six stories are not required to confirm the seismic performance from structural engineers in Korea. For this reason, small-size pilloti-type RC buildings need to be checked for seismic performance. Based on this background, this study performed nonlinear dynamic analysis using the PERFORM-3D for small-size pilloti-type RC buildings and assessed their seismic performance. Examples are two through four story buildings with and without walls in the first story. The walls and columns in the first story satisfied the target performance in the basic of flexural behavior due to quite a large size and reinforcement. However, wall shear demands exceed shear strength in some buildings. When designed for KBC2009, wall shear strength exceed shear demand in some buildings, but still does not in others. Consequently, wall shear must be carefully checked in both existing and new small-size pilloti-type RC buildings.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권3호
• /
• pp.1-9
• /
• 2024

본 연구는 대기외란 조건에서 비전센서를 활용하여 구조물의 동적 변위 측정을 위하여 멀티스케일 템플릿 매칭 기법 (TMI: Template Matching with Image pyramids)을 제안하고 제안기법의 변위 측정 성능을 조사하기 위해 진행되었다. 촬영거리에 따른 변위 측정 성능을 평가하기 위해 3층 전단 구조물을 설계하였으며, FHD(1920×1080)급 카메라를 준비하여 변위 계측에 사용하였다. 최초 촬영거리를 10m로 설정하였고, 10m씩 멀어지면서 최대 40m까지 변위 측정 실험을 진행하였다. 실내 조도 조건(450lux)에서 발열 기구를 활용하여 대기외란을 발생시켰으며, 대기외란으로 이미지를 왜곡시켰다. 사전실험을 통해 대기외란시 특징점 기반 변위 측정 방법과 제안기법의 변위 측정 타당성을 비교 검증하였으며, 검증 결과 제안기법의 낮은 측정 에러율을 나타냈다. 대기외란 환경에서 변위 측정 성능평가 결과, 인공 타겟을 활용한 TMI는 대기외란 유무에 따라 변위 측정 성능에 큰 차이가 없었다. 하지만 자연 타겟을 활용하였을 때, 20m 이상의 촬영거리에서 RMSE가 크게 상승하여 제안기법의 운용 한계를 보여줬다. 이는 촬영거리 증가에 따라 자연 타겟의 해상도가 저하되며, 대기외란으로 인한 이미지 왜곡이 템플릿 이미지 추정에 오류가 발생 되어 변위 측정 오차가 높게 발생하는 경향을 나타냈다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.301-306
• /
• 2008

The present seismic analysis of Road-Bridge Design Standard is on a basis of load-vased analysis which lets structures have the strength over load. In this study, the capacity spectrum method, a kind of displacement based method, which is evaluated by displacement of structure, is presented as an alternative to the analysis method based on load. Seismic capacity is performed about the existing reinforced concrete pier which has already secured seismic design by capacity spectrum method. As a result, capacity spectrum method could realistically evaluate the non-elastic behavior of structures easilly and quickly and the displacement of structures for variable ground motion level. And it could efficiently apply to an evaluation of seismic capacity about the existing structures and a verification of design for capacity target of the structure. We propose the seisemic performance method by using the Finite Element Analysis Program.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.43-52
• /
• 2020

In this study, the Buckling restrained braces reinforced with engineering plastics that can compensate for the disadvantages in the manufacturing process of the existing buckling restrained brace. The proposed PC-BRB was fabricated to evaluate the reinforcement effect by carrying out a structural performance test and a full-scale two-layer frame test through cyclic loading test. As a result of PC-BRB's incremental and cyclic loading test, stable hysteresis behavior was achieved within the target displacement, and the compressive strength adjustment coefficient satisfied the recommendation. As a result of the real frame experiment, the strength of the reinforced specimen increased compared to the unreinforced specimen, and the ductility and energy dissipation increased.

• 품질경영학회지
• /
• 제38권1호
• /
• pp.20-33
• /
• 2010

This study investigates the relationships of total quality management (TQM), organizational learning (OL) activities and business performance and examines the partial mediation effect of OL activities on business performance in Korean industrial manufacturing setting. Main target sample firms were all manufacturing companies listed in the Korea Composite Stock Price Index (KOSPI) and 206 firms participated. This study theoretically develops a conceptual model with 3 hypotheses regarding how TQM practices influence OL activities and how the OL activities partially mediate between the TQM practices and business performance. To examine these hypotheses, Structural Equation Modeling (SEM) was employed and an alternative model which includes a path between errors of leadership factor and OL construct was developed. The findings are TQM practices cannot directly influence business performance but indirectly impact business performance through OL activities. This study found that OL activities playa role as firms' critical competency to improve business performance.

• 한국포장학회지
• /
• 제30권1호
• /
• pp.53-62
• /
• 2024

Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.147-155
• /
• 2007

본 논문에서는 수정 슬라이딩 모드제어기의 비선형 이력구조물의 지진응답 제어성능이 평가되었다. 수정 슬라이딩모드 제어는 제어력을 계산하기 위해 Lyapunov함수의 목표변화율을 이용하는 기법으로 기존 연구에서는 선형구조물에 대한 성능만이 조사되었다. 그러나 강진시 대부분의 구조물은 비선형 거동을 보인다는 점을 고려할 때 기존 연구의 결과는 실제 적용에 있어 제한점을 가지고 있다. Bouc-Wen 모델을 사용하여 구조물의 비선형 거동을 모델링 하였으며, 이력이선형 단자유도 구조물에 대한 통계해석과 비선형이력 면진구조물에 대한 해석결과는 제안된 수정 슬라이딩모드 제어알고리즘이 기존의 슬라이딩모드 제어기보다 우수한 성능을 가짐을 보여준다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.492-499
• /
• 2004

The purpose of this paper is to present a design procedure of coulomb friction dampers for controlling elastic and inelastic responses of building structures. The equivalent damping and frequency increased by the friction damper are estimated using ATC-40 and ATC-55 procedures which provide equivalent linear system for bilinear one, and then a design formula to achieve target performance response level by friction damper is presented. It is identified that there exists error between the responses obtained by this formula and by performing nonlinear analysis and the features of the error vary according to the hardening ratio, yield strength ratio, and structural period. Equations for compensating this er개r are reposed based on the least square method, and the results from numerical analyses indicate that the error is significantly reduced, and the proposed formula can be used without much error for designing coulomb friction damper for retrofitting a structure showing elastic or inelastic behavior.

• 한국지진공학회논문집
• /
• 제26권5호
• /
• pp.211-217
• /
• 2022

New buildings have been designed using different seismic design standards that have been revised. However, the seismic performance of existing buildings is evaluated through the same performance evaluation guidelines. Existing buildings may not satisfy the performance targets suggested in the current guidelines, but there are practical limitations to discriminating the existing buildings with poor seismic performance through a full investigation. In this regard, to classify buildings with poor seismic performance according to the applied standard, this study aimed to evaluate performance-based investigation of the seismic design proposals of buildings with different design standards. The target buildings were set as RC ordinary moment frames for office occupancy. Changes in seismic design criteria by period were analyzed, and the design spectrum changes of reinforced concrete ordinary moment resisting frames were compared to analyze the seismic load acting on the building during design. The seismic design plan was derived through structural analysis of the target model, compared the member force and cross-sectional performance, and a preliminary evaluation of the seismic performance was performed to analyze the performance level through DCR. As a result of the seismic performance analysis through the derived design, the reinforced concrete ordinary moment frame design based on AIK 2000 has an insufficient seismic performance level, so buildings built before 2005 are likely to need seismic reinforcement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.123-130
• /
• 2014

본 연구에서는 카메라의 위치에 상관없이 정확하게 구조물의 변위를 측정할 수 있는 영상 기반 변위 계측 시스템을 제안하였다. 기존의 영상 기반 변위 계측 시스템은 카메라의 각도에 따라 오차를 유발하며, 그에 따라 대형 구조물에서 적용성에 제한되는 단점이 존재하였다. 본 시스템은 네 개의 점이 그려진 측정판을 변위를 측정하고자 하는 구조물의 위치에 부착하여 카메라로 촬영한 뒤 영상을 해석하여 변위를 얻는다. 측정판과 카메라의 각도에 무관하게 구조물의 변위를 얻기 위하여, 이미지 좌표계와 세계 좌표계 상의 두 평면간의 대응관계를 표현하는 평면 호모그래피 기법을 활용하였다. 성능 검증을 위하여 소형 구조물을 이용한 실내실험을 수행하였으며, 어떠한 각도에서 촬영하더라도 실제 변위를 정확하게 측정할 수 있음을 보였다.