• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.489-496
• /
• 2019

This paper is a study on the evaluation of loss factor of damping treatment materials to reduce the noise and vibration for panels of railway vehicles and automobiles. In order to determine the modal parameters of damping materials, beam excitation tests were carried out using different type PVC coated aluminum and steel base beam specimens. The specimens were excited from 10 Hz to 1000 Hz frequency range using sinusoidal force, and transfer mobility data were measured by using an accelerometer. The loss factors were determined by using integrated program, based on theories of Half Power Method, Minimum Tangent Error Method, Minimum Angle Error Method and Phase Change Method, which enable to evaluate the parameters using modal circle fit and least squares error method. In the case of lower loss factor and data of linear characteristics, any method could be applied for evaluation of parameters, however the case of higher loss factor or data including non-linear characteristics, the minimum angle error method could reduce the loss factor evaluation. The obtained dynamic properties of the coating material could be used for application of Finite Element Method analyzing the noise control effects of complex structures such as carbody or under-floor boxes of rolling stock. The damping material will be very useful to control the structural noise, because the obtained modal loss factors of each mode show very good effect on over $2^{nd}$ mode frequency range.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.67-78
• /
• 2023

The rare metals used as raw materials in high-tech industries undergo changes in demand structures and supply chains following domestic industrial structural shifts and technological advancements, exhibiting high price volatility. Therefore, it is necessary to periodically analyze changes in the demand structures of rare metals. Since domestic demand for most rare metals relies on imports in Korea, the changes in domestic demand for rare metals can be identified by analyzing changes in their trade structure. In the present study, we analyze the changes in trade volume, trade growth rate, trade rankings, and trading countries from 2000 to 2022 for 35 rare metals, categorized into five types-ores, metals, alloys, compounds, and scrap. The trade of the raw materials of rare metals in Korea has generally increased since the 2000s, except for a significant decline in 2009 and 2016. The total trade volume, encompassing both exports and imports, has increased by approximately tenfold in 2022 compared to 2001. Until the mid-2010s, the trade of the raw materials of rare metals was primarily focused on those used in steel-manufacturing such as silicon, nickel, chrome, molybdenum, manganese, and others. However, after that period, there has been an increase in the trade of platinum group metals like palladium, rhodium, platinum, and the raw materials of rare metals for secondary battery-manufacturing such as lithium and cobalt. Particularly in 2022, lithium has become the largest share in trade of the raw materials of rare metals in Korea, due to the price surge and increase in demand.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.18-28
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were performed on one unreinforced beam-column specimen and two reinforced specimens with U-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of U-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D, agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.77-98
• /
• 1998

In general, spatial imbalance in regional growth is a major cause of social and political conflicts within a state. In Korea, this inequality has functioned as a threat to the state's integration. With the economic development policies by regional industrialization over the past three decades, most of the industrial activities have been concentrated in Seoul and Pusan metropolitan areas, which are surrounded by Kyonggi, Kyongnam provinces respectively. Compared to these areas, Chonnam and Chonbuk provinces have lagged behind in economic development. Therefore, in order to increase the regional economic development of the southwestern region in Korea, the central government has been enforcing several policies aimed at regional industrialization since the 1980s. The purpose of this study focuses on the regional economic impacts of a newly established industrial estate-Yulchon industrial complex- which would act as a regional growth center in the Kwangyang bay area. The Kwangyang bay area consists of several industrial estates such as Kwangyang Iron and Steel Co. and its related industrial complex, Chuam rural industrial estate, Yeochon industrial complex, and so on. In addition, the Kwangyang container port was constructed in 1997. The Kwangyang bay area has been changing to a new industrial district in the southwestern part of Korea as a result of industrialization policies which were activated by central government. The Yulchon industrial complex, which is expected to be completed in 2001, would draw many manufacturing plants. For example, Hyundai Motors Co. has a plan to locate a new automobile assembly plant within the estate. As the plan has high probability to be realized, it will be interesting to study the effects a new automobile assembly plant and its related production linkages have on the region. This study is to estimate the expected structural characteristics of automobile production activities in Yulchon. The following details will be discussed: the regional economic impacts of a new automobile industry in Yulchon industrial complex, the production linkage formation via hierarchical subcontracting systems, the alternative strategies to promote the growth of regional economies, and the scheme to improve the auto-parts and components industry in Kwangju and Chonnam provinces by establishing auto-mobile production function. Automoblie industry generally gives great influences on not only regional economies but the related industries, for example, the firms producing automotive components. If a new plant producing automobiles and its related firms producing components are to be established in Yulchon, they will affect on the regional development directions and change the regional characteristics of industrial structure. In order to increase the spread effects of the new industry in Yulchon industrial complex, almost all of the automobile production processes must be organized concurrently within a limited range of distance. There is an imperative that the co-operation system should be structured between the assembly firm and many firms producing its components. In addition to those, it would be required such as the effective division of labors between the firms, much more capabilities in the technical innovations, and the reconstruction of interrelationship between the labor unions and the firms' managers.