• 제목/요약/키워드: Structural Model Test

검색결과 2,456건 처리시간 0.036초

A new bridge-vehicle system part I: Formulation and validation

  • Chan, Tommy H.T.;Yu, Ling;Yung, T.H.;Chan, Jeffrey H.F.
    • Structural Engineering and Mechanics
    • /
    • 제15권1호
    • /
    • pp.1-19
    • /
    • 2003
  • This paper presents the formulation of a new bridge-vehicle system with validation using the field data. Both pitching and twisting modes of the vehicle are considered in the contribution of the dynamic effects in the bridge responses. A heavy vehicle was hired as a control vehicle with known axle weight, axle spacing and spring coefficients. The measured responses were generated from the control vehicle running at a particular speed at a test span at Ma Tau Wai Flyover. The measured responses were acquired using strain gauges installed beneath the girder beams of the test bridge. The simulated responses were generated using BRVEAN that is a self-developed program based on the proposed bridge-vehicle system. The validation shows that the bridge model is valid for representing the test bridge and the governing equations are valid for representing the motion of moving vehicles.

적설하중 재하실험과 구조해석을 통한 단동 비닐하우스의 거동 연구 (An Experimental and Numerical Study on the Behavior Characteristics of Single-span Plastic Greenhouse under Snow Load)

  • 송호성;김유용;유석철;임성윤
    • 한국농공학회논문집
    • /
    • 제64권4호
    • /
    • pp.45-53
    • /
    • 2022
  • In this study, the loading test and structural analysis were performed on the snow load and the results were compared. The load plates were loaded on the roof surface of the model, and structural analysis was performed under the same conditions. The result of loading test, the maximum displacement was observed in the center of the top, and the maximum stress was observed near the bottom point. Displacement and stress were found to have a high linear relationship with the load. Comparing the structural analysis results with the loading test results, the maximum displacement difference is 4.5% and the maximum stress difference is 10.2%. It is expected that closer results can be derived if the boundary conditions for the longitudinal direction of the model are clarified during experiments and analysis.

점탄성 감쇠기가 설치된 구조물의 진동대 실험 (Shaking Table Test of a Structure with Added Viscoelastic Dampers)

  • 김진구;권영집
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제5권4호
    • /
    • pp.197-203
    • /
    • 2001
  • This study presents the results of shaking table test of scaled model structures with added viscoelastic dampers, which are considered to be one of the most efficient means of upgrading existing structures against seismic loads. The experimental results were compared with those from analysis based on the linear modeling of viscoelastic dampers. The parameters obtained from free vibration test were utilized in the analysis. According to the results the added viscoelastic dampers turned out to be effective in reducing the responses of the model structures. It was also found that the analysis with linear modeling of viscoelastic dampers could simulate the test results accurately.

  • PDF

Artificial Neural Networks for Interest Rate Forecasting based on Structural Change : A Comparative Analysis of Data Mining Classifiers

  • Oh, Kyong-Joo
    • Journal of the Korean Data and Information Science Society
    • /
    • 제14권3호
    • /
    • pp.641-651
    • /
    • 2003
  • This study suggests the hybrid models for interest rate forecasting using structural changes (or change points). The basic concept of this proposed model is to obtain significant intervals caused by change points, to identify them as the change-point groups, and to reflect them in interest rate forecasting. The model is composed of three phases. The first phase is to detect successive structural changes in the U. S. Treasury bill rate dataset. The second phase is to forecast the change-point groups with data mining classifiers. The final phase is to forecast interest rates with backpropagation neural networks (BPN). Based on this structure, we propose three hybrid models in terms of data mining classifier: (1) multivariate discriminant analysis (MDA)-supported model, (2) case-based reasoning (CBR)-supported model, and (3) BPN-supported model. Subsequently, we compare these models with a neural network model alone and, in addition, determine which of three classifiers (MDA, CBR and BPN) can perform better. For interest rate forecasting, this study then examines the prediction ability of hybrid models to reflect the structural change.

  • PDF

수리모형시험을 통한 다단식 지오텍스타일 튜브의 수리동역학적 거동분석 (Hydrodynamic Behavior Analysis of Stacked Geotextile Tube by Hydraulic Model Tests)

  • 신은철;오영인;김성윤
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.705-712
    • /
    • 2002
  • Geotextile tube is environmentally sustainable technology and has been applied in hydraulic and coastal engineering applications. Geotextile tube is composed in permeable fabrics and Inside dredged materials, and hydraulically or mechanically filled with dredged materials. These tube are generally about 1.0m to 2.0m in diameter, through they can be sized for any application. The tubes can be used solely, or stacked to add greater height and usability. Stacked geotextile tubes will create by adding the height necessary for some breakwaters and embankment, therefore increasing the usability of geotextile tubes. This paper presents the hydrodynamic behavior of stacked geotextile tube by hydraulic model tests. The hydraulic model test conducted by structural condition and wave conditions. Structural condition is installation direction to the wave(perpendicular band 45$^{\circ}$), and wave condition is varied with the significant wave height ranging from 3.0m to 6.0m. Based on the test results, the hydrodynamic behaviors such as structural stability, wave control capacity, and strain are interpreted.

  • PDF

청소년기 여학생의 월경전증후군 구조모형 (A Structural Equation Modeling on Premenstrual Syndrome in Adolescent Girls)

  • 전정희;황선경
    • 대한간호학회지
    • /
    • 제44권6호
    • /
    • pp.660-671
    • /
    • 2014
  • Purpose: The aims of this study were to construct a hypothetical structural model which explains the premenstrual syndrome (PMS) in adolescent girls and to test the fitness with collected data. Methods: The participants were 1,087 adolescent girls from 3 high schools and 5 middle schools in B city. Data were collected from July 3 to October 15, 2012 using self-reported questionnaires and were analyzed using PASW 18.0 and AMOS 16.0 programs. Results: The overall fitness indices of hypothetical model were good (${\chi}^2$ =1555, p<.001), ${\chi}^2$/df=4.40, SRMR=.04, GFI=.91, RMSEA=.05, NFI=.90, TLI=.91, CFI=.92, AIC=1717). Out of 16 paths, 12 were statistically significant. Daily hassles had the greatest impact on PMS in the adolescent girls in this model. In addition, PMS in adolescent girls was directly affected by menarche age, Body Mass Index (BMI), amount of menstruation, test anxiety, social support, menstrual attitude and femininity but not by academic stress. This model explained 27% of the variance in PMS in adolescent girls. Conclusion: The findings from this study suggest that nursing interventions to reduce PMS in adolescent girls should address their daily hassles, test anxiety, menstrual attitude and BMI. Also, social support from their parents, friends, and teachers needs to be increased.

사장교의 구조식별을 위한 가진실험 데이터분석 (FVT Signal Processing for Structural Identification of Cable-stayed Bridge)

  • 이정휘;김정인;윤자걸
    • 한국소음진동공학회논문집
    • /
    • 제14권10호
    • /
    • pp.923-929
    • /
    • 2004
  • In this research, Forced Vibration Test(FVT) on a cable stayed bridge was conducted to examine the validity of the frequency domain pattern recognition method using signal anomaly index and artificial neuralnetwork. 7he considering structure, Samchunpo Bridge, located in Sachun-Shi, Kyungsangnam-Do, is a cable stayed bridge with the 436 meter span. The excitation force was induced by a sudden braking of a fully loaded truck. and vortical acceleration signals were acquired at 14 points. The initial 2-dimensional FE-model was developed from the design documents to prepare the training sets for the artificial neural network, and then the model calibration was performed with the field test data. As a result of the model calibration, we obtained the FFT spectrums from the model simulation, which was similar to those from the vibration test. These tests and the simulation data will be used for the structural identification using arbitrarily added masses to the bridge.

사장교의 구조식별을 위한 가진실험 데이터분석 (FVT Signal Processing for Structural Identification of Cable-Stayed Bridge)

  • 윤자걸;이정휘;김정인
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.619-623
    • /
    • 2003
  • In this research, Forced Vibration Test(FVT) on a cable stayed bridge was conducted to examine the validity of the frequency domain pattern recognition method using signal anomaly index and artificial neural network. The considering structure, Samchunpo Bridge, located in Sachun-Shi, Kyungsangnam-Do, is a cable stayed bridge with the 436 meter span. The excitation force was induced by a sudden braking of a fully loaded truck, and vertical acceleration signals were acquired at 14 points. The initial 2-dimensional FE-model was developed from the design documents to prepare the training sets for the artificial neural network, and then the model calibration was performed with the field test data. As a result of the model calibration, we obtained the FFT spectrums from the model simulation, which was similar to those from the vibration test. These tests and the simulation data will be used fur the structural identification using arbitrarily added masses to the bridge.

  • PDF

유연한 지붕으로 된 단층 구조물의 지진 거동과 성능 분석 (Seismic Behavior and Performance Assesment of a One-story Building with a Flexible Diaphragm)

  • 김상철;오영훈
    • 한국전산구조공학회논문집
    • /
    • 제16권4호
    • /
    • pp.377-386
    • /
    • 2003
  • 본 논문에서는 단순화 다자유도 모델링 방법을 이용하여 유연한 지붕을 갖는 l/2 축소 단층 보강조적조 건물의 지진 거동을 분석하였다. 선형 및 비선형 해석에 의한 결과들은 l/2 축소모형 단층 건물의 진동대 실험결과와 비교ㆍ분석되었다. 정확한 면내 및 면외 강성과 강도를 산정할 적절한 방법이 없기 때문에 구조모델 보정방법을 적용하여 반복적인 비교 ·분석 과정에서 각 부재의 강성과 강도변화에 따른 민감도를 평가하였다. 보정된 구조물의 특성을 사용하여 구조 재해석을 수행하였으며, 지붕구조물의 유연성이 전체 건물의 동적 거동에 미치는 영향을 분석하였다. 유연한 지붕은 전단벽의 면외 강성과 강도에 많은 영향을 미치게 되며, 강체 지붕과는 확연히 구분되는 동적 거동을 보여주었다.

Evolutionary-base finite element model updating and damage detection using modal testing results

  • Vahidi, Mehdi;Vahdani, Shahram;Rahimian, Mohammad;Jamshidi, Nima;Kanee, Alireza Taghavee
    • Structural Engineering and Mechanics
    • /
    • 제70권3호
    • /
    • pp.339-350
    • /
    • 2019
  • This research focuses on finite element model updating and damage assessment of structures at element level based on global nondestructive test results. For this purpose, an optimization system is generated to minimize the structural dynamic parameters discrepancies between numerical and experimental models. Objective functions are selected based on the square of Euclidean norm error of vibration frequencies and modal assurance criterion of mode shapes. In order to update the finite element model and detect local damages within the structural members, modern optimization techniques is implemented according to the evolutionary algorithms to meet the global optimized solution. Using a simulated numerical example, application of genetic algorithm (GA), particle swarm (PSO) and artificial bee colony (ABC) algorithms are investigated in FE model updating and damage detection problems to consider their accuracy and convergence characteristics. Then, a hybrid multi stage optimization method is presented merging advantages of PSO and ABC methods in finding damage location and extent. The efficiency of the methods have been examined using two simulated numerical examples, a laboratory dynamic test and a high-rise building field ambient vibration test results. The implemented evolutionary updating methods show successful results in accuracy and speed considering the incomplete and noisy experimental measured data.