• Earthquakes and Structures
• /
• 제13권2호
• /
• pp.103-118
• /
• 2017

In vertical seismic isolation (VSI), a building is partitioned intentionally by vertical layers into two dynamically different substructures for seismic response reduction. Initially, a 1-story frame was partitioned into two substructures, interconnected by viscous and visco-elastic links, and seismic responses of the original and the vertically isolated structures (VIS) were obtained, considering a large number of stiffness and mass ratios of substructures with respect to the original structure. Color contour graphs were defined for presentation and investigation of large amounts of output results. Dynamic characteristics of the isolated structures were studied by considering the non-classical damping of the system, and then the effects of viscous and visco-elastic link parameters on the modal damping ratios were discussed. On this basis, three states of mass isolation, interactional state, and control mass were differentiated. Response history analyses were performed by Runge-Kutta numerical method. In these analyses, interaction of isolation ratios and link parameters, on response control of VIS was studied and the appropriate ranges for link parameters as well as the optimal ranges for isolation ratios were suggested. Results show that by using the VSI technique, seismic response reduction up to 50% in flexible substructure and even more in stiff substructure is achievable.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.125-131
• /
• 2021

For the vibration reliability tests, the jigs for mounting the test specimen on a vibration reliability tester are required. The dynamic stabilities of the jigs should be verified before the tests for obtaining the accurate reliability of the test specimen. This paper proposes an analytical technology for ensuring the dynamic structural stability for the test setup including the jig. The technology includes the mode analyses for checking resonance, the harmonic analyses for evaluating the dynamic structural stability of test setup including the jig, and the fatigue analyses for obtaining the durable reliability time with calculating the life cycles at the area of weakness. The cause investigation of the damaged jig during vibration reliability test of a rubber hose and the design of new revised jig are performed by using the technology. The vibration reliability test for the rubber hose with the new revised jig by analysis results is successfully conducted without any problem. Therefore the jig's design technology proposed in this paper may be useful for other items as well.

• 한국전산구조공학회논문집
• /
• 제28권1호
• /
• pp.19-27
• /
• 2015

근래 국내 초고층 주상복합 건물에는 철근콘크리트구조가 보편적으로 적용되는데, 이러한 철근콘크리트 초고층 주상복합 건물은 시공 시점에 따라 구조적인 문제가 발생할 수 있다. 따라서, 시공 중인 철근콘크리트 초고층 주상복합 건물에 대하여, 시공 시점별 구조 안전성 및 횡력저항성능을 검토하고자 한다. 이를 위해, 예제 모델로 탑상형의 초고층 주상복합 60층 건물을 선정했고, 기존의 범용구조해석 프로그램을 사용하여 구조해석을 수행하였다. 각 시공 시점별 10층, 20층, 30층, 40층, 50층, 60층 완료모델과 60층 완공단계 모델의 구조성능을 비교하였다. 구조성능 비교를 위해 이 모델들의 고유치해석을 수행하였으며, 횡력저항성능과 부재별 단면성능을 검토하였다. 횡력저항성능 검토를 위해 횡변위비와 층간변위비를 검토했고, 부재별 단면성능 검토는 완공단계에 대한 설계강도비와 시공단계의 설계강도비를 비교하여 부재안전성을 검토하였다. 이 연구를 통해, 시공 중인 철근콘크리트 초고층 건물의 구조 안전성을 검토하고 시공단계에 적합한 구조해석 및 설계하중의 가이드라인을 제시하고자 한다.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.35-40
• /
• 2015

An IP-2 type container is used for the transport of low-level radioactive materials. An IP-2 type metal container was modeled and analyzed for the dropping conditions in normal transport conditions required by NSSC Notice 2014-50, "Regulations on the packaging and transport of radioactive materials." Structural analyses were performed by finite element method, and the acceptability was reviewed by comparing the results with technical standards and maximum allowable stresses of each material. Structural members of the container were modeled as 3D solid elements, and the possible dropping directions were considered in these analyses. Results show that maximum stresses, maximum deformed gaps in the cover, and maximum estimated thickness reduction in structural members were well below the allowable limits; thus, the structural integrity of the container was confirmed.

• Structural Engineering and Mechanics
• /
• 제53권2호
• /
• pp.355-372
• /
• 2015

This paper identifies the effects of infill wall existence and arrangement in the seismic response of steel frame structures. The methodology followed was based on the utilisation of overall seismic response indicators that distil the complexity of structural response in a single value hence enabling their straightforward comparative and statistical post process. The overall structure damage index after Park/Ang ($OSDI_{PA}$) and the maximum inter-story drift ratio (MISDR) have been selected as widely utilized structural seismic response parameters in contemporary state of art. In this respect a set of 225 Greek antiseismic code (EAK) spectrum compatible artificial accelerograms have been created and a series of non-linear dynamic analyses have been executed. Data were obtained through nonlinear dynamic analyses carried on an indicative steel frame structure with 5 different infill wall topologies. Results indicated the significant overall contribution of infill walls with a reduction that ranged 35-47% of the maximum and 74-81% of the average recorded $OSDI_{PA}$ values followed by an overall reduction of 64-67% and 58-61% for the respective maximum and average recorded MISDR values demonstrating the relative benefits of infill walls presence overall as well as localised with similar reductions observed in 1st level damage indicators.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.101-116
• /
• 2018

As one of the most important engineering structures, arch dams are huge constructions built with human hands and have strategical importance. Because of the fact that long construction duration, water supply, financial reasons, major loss of life and material since failure etc., the design of arch dams is very important problem and should be done by expert engineers to determine the structural behavior more accurately. Finite element analyses and non-destructive experimental measurements can be used to investigate the structural response, but there are some difficulties such as spending a long time while modelling, analysis and in-situ testing. Therefore, it is more useful to conduct the research on the laboratory conditions and to transform the obtained results into real constructions. Within the scope of this study, it is aimed to determine the structural behavior of arch dams considering experimentally validated prototype laboratory model using similitude and scaling laws. Type-1 arch dam, which is one of five arch dam types suggested at the "Arch Dams" Symposium in England in 1968 is selected as reference prototype model. The dam is built considering dam-reservoir-foundation interaction and ambient vibration tests are performed to validate the finite element results such as dynamic characteristics, displacements, principal stresses and strains. These results are considered as reference parameters and used to determine the real arch dam response with different scales factors such as 335, 400, 416.67 and 450. These values are selected by considering previously examined dam projects. Arch heights are calculated as 201 m, 240 m, 250 m and 270 m, respectively. The structural response is investigated between the model and prototype by using similarity requirements, field equations, scaling laws etc. To validate these results, finite element models are enlarged in the same scales and analyses are repeated to obtain the dynamic characteristics, displacements, principal stresses and strains. At the end of the study, it is seen that there is a good agreement between all results obtained by similarity requirements with scaling laws and enlarged finite element models.

• 항공우주시스템공학회지
• /
• 제17권2호
• /
• pp.45-55
• /
• 2023

본 연구에서는 V-22 Osprey 틸트로터의 25% 축소 모델인 TRAM에 대하여 회전익기 통합 해석 코드인 CAMRAD II를 이용하여 프롭로터의 Aeromechanics 모델링과 블레이드 및 피치 링크에 대한 구조 하중 해석을 수행한 후, DNW 풍동 시험 및 선행 해석 연구 결과와 상호 비교하였다. 본 연구에서는 저속 전진 비행 시 블레이드 플랩 굽힘 모멘트의 구조 하중 및 진동 하중 변화를 풍동 시험 결과에 대하여 비교적 잘 예측하였다. 리드-래그 굽힘 및 비틀림 모멘트의 구조 하중 및 진동 하중 해석은 풍동 시험과 다소 다르게 얻어졌으나, 평균값을 제거하였을 때 로터 회전 한 바퀴당 구조 하중 해석 결과가 풍동 시험 및 선행 해석 연구와 비교적 유사하였다. 피치 링크의 구조 하중 및 진동 하중 해석은 전반적으로 선행 연구의 시험 및 해석 결과와 유사하게 얻어졌다. 마지막으로 블레이드 구조 진동 하중의 조화 성분 해석 및 비교를 통하여 블레이드 리드-래그 굽힘 및 비틀림 모멘트의 오차 발생 원인을 분석하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.167-174
• /
• 2005

Through time-dependent analyses of RC bridges constructed by a movable scaffolding system (MSS) considering the construction sequence and creep deformation of concrete, structural responses related to the member forces are reviewed. On the basis of the compatibility condition and equilibrium equation at every construction stage, basic equations that can describe the moment variation with time in movable scaffolding construction are derived. By using the introduced relations, the design moment and its variation over time can easily be obtained with only the elastic analysis results and without additional time-dependent analyses considering the construction sequences. In addition, the design moments determined by the introduced equations are compared with the results from a rigorous numerical analysis with the objective of establishing the relative efficiencies of the introduced equations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.59-65
• /
• 2013

본 논문은 헬리컬 풍력터빈을 이용한 풍력터빈 나무의 구조적 안정성을 검토하는데 목적이 있다. 복합재료를 적용하여 헬리컬 로터 블레이드를 설계하였으며, 유한요소 해석을 통하여 안정성을 검토하였다. 또한 4개의 헬리컬 로터를 지지하고 있는 풍력터빈 나무에 대하여 풍압, 로터의 회전 그리고 자중을 고려한 구조해석을 수행하여 설계 타당성을 검토 하였다.

• Structural Monitoring and Maintenance
• /
• 제4권2호
• /
• pp.133-151
• /
• 2017

The paper describes the results of an experimental and numerical investigation into the structural and damage response of sandwich composites to low-velocity impact. Sandwich panels consisting of laminated composite skins with three different layups bonded to a PVC foam core were subjected to impact at various energy levels corresponding to barely visible impact damage (BVID) in the impacted skins. Damage assessment analyses were performed on the impacted panels to characterise the extent and the nature of the major failure mechanisms occurring in the skins. The data collected during the experimental analyses were finally used to assess the predictive capabilities of an FE tool recently developed by the authors for detailed simulation of impact damage in composite sandwich panels. Good agreement was observed between experimental results and model predictions in terms of structural response to impact, global extent of damage and typical features of individual damage mechanisms.