• Title/Summary/Keyword: Strong-mixing

Search Result 358, Processing Time 0.025 seconds

Vertical Temperature Profile in the Yellow Sea according to the Variations of Air Temperature

  • CHO Kyu-Dae;CHO Kwang-Woo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.21 no.1
    • /
    • pp.1-10
    • /
    • 1988
  • The vertical temperature profiles of the Yellow Sea in summer are investigated by means of the nine air temperature (AT) patterns which are classified with the AT of winter and summer. The sea surface temperature (SST) is high when the AT of summer is high, and vice versa. The gradient of thermocline in the offshore region is higher than that in the coastal region and is not always favorable with the AT patterns. The relation between sea bottom temperature (SBT) and the AT of winter is favorable when the SBT is averaged in the coastal and offshore stations. In addition, the SST of coastal stations is higher than that of offshore stations because of the strong mixing by the tidal current in the coastal region. The correlation between the AT and the SST of August is favorable (r=0.44-0.69), while the correlation between the AT of February and the SBT of August is not favorable except the stations, A2 (r=0.57) and B2 (r=0.61).

  • PDF

A NUMERICAL STUDY ON HEAT TRANSFER ENHANCEMENT BY PULSATILE FLOW IN A PLATE HEAT EXCHANGER (판형 열교환기의 맥동유동에 의한 열전달 향상에 관한 수치해석연구)

  • Lee, Myung-Sung;Hur, Nahm-Keon;Kang, Byung-Ha
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2006.10a
    • /
    • pp.93-96
    • /
    • 2006
  • The heat transfer enhancement by pulsatile flow in the plate heat exchanger has been investigated numerically in the present study. The numerical study was performed in the range of the mass flux from 0.04 to 0.12 kg/s. The results showed that the pulsatile flow produces resonating vortex shedding at the groove sharp edges and a strong transient vortex rotation within the grooved channels. As a result, the mixing between the trapped volume in the grooved cavity and the main stream was enhanced. Good agreements between the predictions and measured data are obtained in steady flow. And the heat transfer of pulsatile flow is about 2.4 times than steady flow when frequency is 10 Hz and the mass flux of cold side is 0.04 kg/s.

  • PDF

Effects of Compost Mixed with Microorganism Compost Fermented on the Seedlings Growth of Tomato and Red Pepper (미생물부숙퇴비의 상토 혼합처리가 토마토, 고추 유묘의 생장에 미치는 영향)

  • 김홍기;서범석;정순주
    • Korean Journal of Organic Agriculture
    • /
    • v.5 no.2
    • /
    • pp.125-140
    • /
    • 1997
  • This experiment was carried out to investigate the effects of compost mixed with microorganism compost fermented for the production of high quality plug seedlings of tomato and red pepper. The results are summarized as follows. As a result of compost analysis, EC value was increased with increment of microorganism compost supplemented but lowered gradually in the late period of seedlings growth, pH value of microorganism compost fermented was 9.3 which is strong alkalinity. In the plot of 30 percent of microorganism compost fermented early growth of tomato seedlings was better in terms of plant height, leaf area and total dry weight. However, early growth of red pepper seedlings was shown in the plot of supplemented with 20 percent of microorganism compost fermented. The higher the mixing rate over 60 percent of micrroganism compost fermented to the soil used retarded the seedlings growth regardless of tomato and red pepper.

  • PDF

Test for Distribution Change of Dependent Errors (종속 오차에 대한 분포 변화 검정법)

  • Na, Seong-Ryong
    • Communications for Statistical Applications and Methods
    • /
    • v.16 no.4
    • /
    • pp.587-594
    • /
    • 2009
  • In this paper the change point problem of the error terms in linear regression models is considered. Since fixed or stochastic independent variables and weakly dependent errors are assumed, usual multiple regression models and time series models including ARMA are covered. We use the estimates of probability density function based on residuals in order to test the distribution change of the unobserved errors. Under some mild conditions, the test using the residuals is proved to have the same limiting distribution as the test based on true errors.

A Numerical Study on Heat Transfer Enhancement by Pulsatile Flow in a Plate Heat Exchanger (맥동유동에 의한 판형열교환기의 열전달 성능 향상에 관한 수치연구)

  • Chin Sang-Mun;Park Jong-Tack;Hur Nahmkeon;Kang Byung Ha
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2005.04a
    • /
    • pp.85-90
    • /
    • 2005
  • The heat transfer enhancement by pulsatile flow in plate heat exchanger has been investigated numerically in the present study. The numerical study was performed ill the range of the Strouhal number from 0.04 to 2 and the Reynolds number from 370 to 730. The results showed that the pulsatile flow produces resonating vortex shedding at the groove sharp edges and a strong transient vortex rotation within the grooved channels. As a result, the mixing between the trapped volume in the grooved cavity and the main stream was enhanced. Good agreements between the predictions and measured data are obtained for the optimum frequency of pulsation and corresponding heat transfer enhancement

  • PDF

A Study on the Numerical Analysis of Behavior of Spray Droplets and Internal Flow Field of Cylinder in Diesel Engine (디젤기관의 실린더내 유동 및 분무액적 거동의 수치적 연구(I))

  • 장영준;박호준;전충환;김진원
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.16 no.1
    • /
    • pp.35-46
    • /
    • 1992
  • In this study, we calculated gas flow fields and distribution of fuel droplet and mass fraction using the CONCHAS-SPRAY code which modified to execute in IBM PC and changed three important factors, injection rate pattern (BASIC, I, II, III), different bowl shape and spray type. Especially vortices which be influenced by fuel-air mixing process, evaporation and flame propagation are generated more strongly in the bowl-piston type combustion chamber than in the flat-piston type. As the spray type changes, it is found that conical type produced large and strong vortices and fuel droplets are effictively diffused into the entire combustion chamber. As the injection rate pattern changes I, II, III based on BASIC type, we confirmed that End-of-Injection Effect strongly influence on droplets life time.

  • PDF

The Enhancement of Corrosion Resistance for WC-Co by Ion Beam Mixed Silicon Carbide Coating

  • Yeo, Sun-Mok;Kim, Dong-Jin;Park, Jae-Won
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.101-101
    • /
    • 2010
  • A strong adhesion of a silicon carbide (SiC) coating on a WC-Co substrate was achieved through an ion beam mixing technique and the corrosion resistance of the SiC coated WC-Co was investigated by means of a potentiodynamic electrochemical test. In the case of 1 M NaOH solution, a corrosion current density for a SiC coated WC-Co with a heat treatment at $500^{\circ}C$ displays about 50 times lower than that for the as-received WC-Co. However, in the case of 0.5 M H2SO4 solution, a corrosion current density for a SiC coated WC-Co displays about 3 times lower than that for as-received WC-Co. We discussed the physical reasons for the changes of the corrosion current densities at the different electrolytes.

  • PDF

Optical Emission Anisotropy in InP Aligned Quantum Dots

  • Shin, Y.H.;Kim, Yongmin;Song, J.D.;Choi, Subong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.288.2-288.2
    • /
    • 2014
  • InP quantum dots were grown by using the molecular beam epitaxy technique. Quantum dots are connected and composed string-like one-dimensional structure due to the strain field along [110] crystal direction. Two prominent photoluminescence transitions from normal quantum dots and string-like one-dimensional structure were observed which show strong optical anisotropy along [1-10] and [110] crystal directions. Both peaks also showed blue-shift while rotating emission polarization from [1-10] to [110] direction. Such optical transition behaviors are the consequence of the valence band mixing caused by strain field along the [110] crystal direction.

  • PDF

Developmemt of a natural Food Colorant, Cochineal Extract, and its Safety (천연색소 코치닐(Cochineal)의 개발과 안전성)

  • 양동수;김일환
    • Proceedings of the Korean Society of Food Hygiene and Safety Conference
    • /
    • 1994.06a
    • /
    • pp.41-49
    • /
    • 1994
  • The meanings, classification, and regulatory status of 'natural food colorants' are discussed. Nowadays the technological advances for processing Cochineal color is flourishing here and aboard, makes highly concentrated products (e.g., 95% Carminic acid) is comercially available. Application of carminic acid for a food system needs target-specific formulation, mixing with alumn, tartaric acid, and other salts to stabilize the color hue in food system. On the other hand, carmine, the aluminium-lake of carminic acid, is more convenient product to be used and would give more strong color. Of these reasons Carmine is much popular product than Cochineal extract in Western and European countries. We insist that carmine should be also certified as natural colorant together with Cochineal extract in Korea. Authors expect that several kinds of anthraquinone colorant (Lac and Kermes) would be introduced in Korean market in near furture.

  • PDF

Soil Washing에 의한 세슘과 코발트 오염 토양 복원기술 개발

  • 김계남;원휘준;오원진;김민길
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2003.04a
    • /
    • pp.337-339
    • /
    • 2003
  • The technology removing radionuclides from soil using soil washing was studied. The main radionuclides contaminated in the soil are Cs$^{137}$ and Co$^{60}$ . It is suitable that scrubbing time is 4 hours and a mixing ratio of soil weight and washing solution volume is 1:10. more than two times continuous scrubbing method with 0.5 M oxalic acid was needed to remove Cs$^{137}$ and Co$^{60}$ from soil more than 70%. Radionuclides removal efficiencies of recycling washing solutions recycled with strong acid resins until 5 times are similar to that of 0.5 M oxalic acid.

  • PDF