• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.883-892
• /
• 2003

The experiment using three-dimensional laser Dopperr velocimetery (LDV) measurements and the computation using the Reynolds stress model of the commercial code, FLUENT, were conducted to give a clear understanding on the structure of tip leakage flow in a forward-swept axial-flow fan operating at the maximum efficiency condition. The tip leakage vortex was generated near the position of the minimum wall static pressure, which was located at approximately 12% chord downstream from the leading edge of blade suction side, and developed along the centerline of the pressure trough within the blade passages. A reverse flow between the blade tip region and the casing, induced by tip leakage vortex, acted as a blockage on the through-flow. As a result, high momentum flux was observed below the tip leakage vortex. As the tip leakage vortex proceeded to the aft part of the blade passage, the strength of tip leakage vortex decreased due to the strong interaction with the through-flow and casing boundary layer, and the diffusion of tip leakage vortex caused by high turbulence. In comparison with LDV measurement data, the computed results predicted the complex viscous flow patterns inside the tip region, including the locus of tip leakage vortex center, in a reliable level.

• Korean Journal of Human Ecology
• /
• v.18 no.6
• /
• pp.1277-1288
• /
• 2009

Building strong brand equity has been the most effective method to extend market share and ensure profits. Brand extension strategy by using well-established mother brand names also becomes the most efficient way to enter a new market. The first objective of this study is to conceptualize and evaluate fashion brand equity. The next purpose is to investigate the relationship between mother brand equity and extended brand attitude. The survey was conducted from the 15th to the 26th of June 2009. We conducted a survey with 200 university students and 182 samples were analyzed. The data was analyzed by SPSS 12.0 with reliability analysis, frequency analysis, factor analysis, regression analysis and One-way ANOVA analysis. The results of this study are as follows. Firstly, the factors of brand equity based on customers were "Brand Satisfaction", "Brand Reliability", "Brand Personality/Value", "Brand Characteristic", and "Brand Edge". Secondly, the order of brand equity based on customers in this study was Polo, Beanpole and Tommy Hilfiger. Lastly, results revealed that brand extension was positively influenced by all factors of mother brand equity.

• Journal of Multimedia Information System
• /
• v.2 no.4
• /
• pp.303-310
• /
• 2015

Vulnerable road users such as bike, motorcycle, small automobiles, and etc. are easily attacked or threatened with bigger vehicles than them. So this paper suggests a new approach two-wheelers detection system riding on people based on modified histogram of oriented gradients (HOGs) which is weighted by curvature and local correlation coefficient. This correlation coefficient between two variables, in which one is the person riding a bike and other is its background, can represent correlation relation. First, we extract edge vectors using the curvature of Gaussian and Histogram of Oriented Gradients (HOG) which includes gradient information and differential magnitude as cell based. And then, the value, which is calculated by the correlation coefficient between the area of each cell and one of bike, can be used as the weighting factor in process for normalizing the HOG cell. This paper applied the Adaboost algorithm to make a strong classification from weak classification. The experimental results validate the effectiveness of our proposed algorithm show higher than that of the traditional method and under challenging, such as various two-wheeler postures, complex background, and even conclusion.

• Journal of KIISE:Software and Applications
• /
• v.34 no.5
• /
• pp.447-454
• /
• 2007

TFT-LCD(Thin Film transistor liquid crystal display) has become actively used front panel display technology with increasing market. Intrinsically there is region of non uniformity with low contrast that to human eye is perceived as defect. As the gray level difference between the defect and the background is hardly distinguishable, conventional thresholding and edge detection techniques cannot be applied to detect the defect. Between the patterned and un-patterned LCD defects, this paper deals with un-patterned LCD defects by using independent component analysis, adaptive thresholding and skewness. Our method showed strong results even on noised LCD images and worked successfully on the manufacturing line.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.633-638
• /
• 2002

The vacuum cleaner that has no dust bag generates very high level annoying noise. The dominant noise source is the 2$\^$nd/ BPF tone of the rotating impeller. In order to reduce the noise, we identify the acoustic characteristics and reduce the noise of the vacuum cleaner and centrifugal fan. The resonance phenomenon is observed in blade passages and we found out that the resonance frequency is very close to the 2$\^$nd/ BPF. In order to reduce this high-level peak noise, new impeller is designed in this paper. The trailing edge of new impeller is inclined and this makes the flow interactions between the rotating impeller and the stationary diffuser vane occurs with some phase shift. The performance of new impeller is similar to the old one but the overall SPL is reduced about 3.6dBA. The SPL of BPF is reduced about 6dBA and 2$\^$nd/ BPF is reduced about 20dBA. The vacuum cleaner, which uses newly developed centrifugal fan, generate more comfortable noise than the old model and the strong tonal sound was dramatically reduced.

• 한국해양학회지
• /
• v.19 no.1
• /
• pp.56-67
• /
• 1984

Mesoscale thermohaline structures of the meandering front in the Korea Strait during November 1976, 1980 and 1982 are studied by means of closely spaced oceanographic observations and the satellite infrared images. Strong thermal and salinity fronts coincide each other and show a wavelike meander motion with wavelengths of 40-60km and amplitudes of, 15-20km. Salinity minimum band of less than 33.0 is found along the onshore edge of the front. Width of the frontal zone corresponds approximately to the internal radius of deformation (R=5-10km) and the slope of density interface is confined to about 2R. A series of satellite infrared images with the interval of 4-5 days show a noticeable growth of frontal meander over the flat shelf west of the Korea Strait. Possible mechanisms of frontal meander and its growth are discussed.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.313-315
• /
• 2001

Some authors have concluded that spiral structures and shocks do not develop if an adiabatic index $\gamma$ > 1.16 is adopted in accretion disc modelling, whilst others have claimed that they obtained well defined spirals and shocks adopting a $\gamma$ = 1.2 and a $M_2/ M_1$ = 1 stellar mass ratio. In our opinion, it should be possible to develop spiral structures for low compressibility gas accretion discs if the primary component is a black hole. We considered a primary black hole of 8M0 and a small secondary component of 0.5M$\bigodot$ to favour spiral structures formations and possible spiral shocks via gas compression due to a strong gravitational attraction. We performed two 3D SPH simulations and two 2D SPH simulations and characterized a low compressibility model and a high compressibility model for each couple of simulations. 2D models reveal spiral structures existence. Moreover, spiral shocks are also evident in high compressibility 2D model at the outer disc edge. We believe that we could develop even well defined spiral shocks considering a more massive primary component.

• Journal of Magnetics
• /
• v.8 no.1
• /
• pp.24-31
• /
• 2003

The discoveries of antiferromagnetic coupling in Fe/Cr multilayers by Grunberg, the Giant Magneto Resistance by Fert and Grunberg and a large tunneling magnetoresistance at room temperature by Moodera have triggered enormous research on magnetic thin films and magnetoelectronic devices. Large opportunities are especially opened by the spin dependent tunneling resistance, where a strong dependence of the tunneling current on an external magnetic field can be found. We will briefly address important basic properties of these junctions like thermal, magnetic and dielectric stability and discuss scaling issues down to junction sizes below 0.01 $\mu\textrm{m}$$^2$with respect to single domain behavior, switching properties and edge coupling effects. The second part will give an overview on applications beyond the use of the tunneling elements as storage cells in MRAMs. This concerns mainly field programmable logic circuits, where we demonstrate the clocked operation of a programmed AND gate. The second 'unconventional' feature is the use as sensing elements in DNA or protein biochips, where molecules marked magnetically with commercial beads can be detected via the dipole stray field in a highly sensitive and relatively simple way.

• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1997

Charged carbon clusters which are formed by the gas activation are suggested to be responsible for the formation of the metastable diamond film. The number of carbon atoms in the cluster that can reverse the stability between diamond and graphite by the capillary effect increases sensitively with increasing the surface energy ratio of graphite to diamond. The gas activation process produces charges such as electrons and ions, which are energetically the strong heterogeneous nucleation sites for the supersaturated carbon vapor, leading to the formation of the charged clusters. Once the carbon clusters are charged, the surface energy of diamond can be reduced by the electrical double layer while that of graphite cannot because diamond is dielectric and graphite is conducting. The unusual phenomena observed in the chemical vapor deposition diamond process can be successfully approached by the charged cluster model. These phenomena include the diamond deposition with the simultaneous graphite etching, which is known as the thermodynamic paradox and the preferential formation of diamond on the convex edge, which is against the well-established concept of the heterogeneous nucleation.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.68.3-68.3
• /
• 2016

We analyze the dependence of environment of warped galaxies by using the local background density, Tidal Index and projected distance as measures of the environment. we use galaxies with redshift less than z=0.025 from the Sloan Digital Sky Survey (SDSS) DR7. We selected 345 edge-on galaxies using color images provided by the SDSS DR7 and checked it using isophotal maps. This sample contains 136 warped galaxies, 209 non-warped galaxies. Among warped galaxies, there are 18 strongly warped galaxies which have warp angles larger than 7.5o. We calculated the fractional distributions of galaxies as a function of environmental parameters. All of these parameters show little difference between warped galaxies and non-warped galaxies if we include weakly warped galaxies. However, there is a clear difference in the fractional distributions between the strongly warped galaxies and non-warped galaxies. The fraction of warped galaxies increases with decreasing distance to the nearest neighbor galaxy but It increases with increasing background density and Tidal Index. However, the relationships between warp angles and the three environmental parameters are not strong. The effect of Tidal Index is well distinguished in small, bright galaxies whereas the effects of the background density and the distance to the nearest neighbor galaxy are more pronounced in large, bright galaxies.