• 제목/요약/키워드: Strong Edge

검색결과 296건 처리시간 0.028초

의료영상의 디지털 워터마킹 (Digital Watermarking of Medical Images)

  • 이상복;이삼열;이준행
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제27권2호
    • /
    • pp.13-19
    • /
    • 2004
  • 본 논문은 의료영상에 강력한 워터마크를 삽입하는 방법을 제안한다. 기존의 푸리에 형태의 변환은 영상의 전체적 주파수 성분에 대한 정보를 구할 수 있는 반면, 웨이블릿 변환법은 국부적으로 에지와 텍스처 영역을 찾을 수 있다. 그러므로 웨이블릿 변환을 통해 해당 영역을 선택하여 저작권 형태의 워터마크를 삽입한다. 이러한 제안 알고리즘을 단순히 웨이블릿 변환을 이용한 Xia의 워터마킹 기법과 비교하여 실험하였다. 기존 논문에서 사용된 공격법으로 충실도(Fidelity)와 견고성(Robustness)에 대해 실험하였고, 그 결과 HVS 특성을 이용한 제안 알고리즘이 Xia의 기법보다 우수함을 확인하였다.

  • PDF

Seismic behavior of the shallow clayey basins subjected to obliquely incident wave

  • Khanbabazadeh, Hadi;Iyisan, Recep;Ozaslan, Bilal
    • Geomechanics and Engineering
    • /
    • 제31권2호
    • /
    • pp.183-195
    • /
    • 2022
  • Under the effects of the near-field earthquakes, the incident angle of the incoming wave could be different. In this study, the influences of some parameters such as incident angle, basin edge, peak ground acceleration level of the bedrock motion as well as different clay types with different consistency on the amplification behavior of the shallow basins are investigated. To attain this goal, the numerical analyses of the basins filled with three different clay types are performed using a fully nonlinear method. The two dimensional models of the basins are subjected to a set of strong ground motions with different peak ground acceleration levels and three different incident angles of 30◦, 45◦ and 90◦ with respect to the horizontal axes. The results show the dominant effect of the obliquely subjected waves at most cases. The higher effect of the 45◦ incident angle on the basin response was concluded. In the other part of this study, the spectral amplification curves of the surface points were compared. It was seen that the maximum spectral amplification of different surface points occurs at different periods. Also, it is affected by the increase in the peak acceleration level of the incoming motions.

회화적 렌더링을 위한 에지 기반 동적 브러시 스트로크 생성에 관한 연구 (Edge Based Dynamic Brush Stroke Generation for Painterly Rendering)

  • 박영섭;윤경현
    • 한국멀티미디어학회논문지
    • /
    • 제8권2호
    • /
    • pp.164-173
    • /
    • 2005
  • 회화적 렌더링은 색상, 방향, 크기 그리고 모양 등 브러시 스트로크의 특징을 결정하는 파라미터들에 의해서 다양한 결과를 만들어 낼 수 있다. 본 논문에서는 참조 데이터를 이용하여 소스 영상에 가장 적합한 브러시 스트로크 생성에 관한 방법을 제안하고자 한다. 색상은 실제로 화가들이 사용한 팔레트 색상을 생성하여 이용하였다. 팔레트를 생성하기 위하여 본 논문에서는 특정화가(특히, 고흐)의 작품에서 주로 사용된 색상을 참조하였으며 소스 영상에서 사용된 색상과 생성된 팔레트 색상을 비교하여 가장 비슷한 색상으로 색상을 변환하여 브러시 스트로크의 색상을 결정하였다. 방향은 반 고흐 스타일 같은 동적인 방향성을 가지는 브러시스트로크를 표현하기 위해 소스 영상의 에지방향을 참조 데이터로 사용하여 에지 주변의 브러시 스트로크의 방향을 보간하는 방법을 적용하였다. 크기는 그리고자 하는 대상의 크기에 따라 각 레이어 별로 폭이 큰 브러시에서 작은 브러시 순으로 결정하였다. 마지막으로, 모양은 소용돌이치는 듯한 반 고흐 스타일을 표현하기 위해 스플라인 곡선을 적용하였다. 이런 방법으로 만들어진 브러시 스트로크는 영영 분할된 각 레이어별로 적용하였으며 렌더링 후에 각 레이어를 합성하였다.

  • PDF

Comparative Study of Tetrahydrothiophene and Thiophene Self Assembled Monolayers on Au(111): Structure and Molecular Orientation

  • Ito, Eisuke;Hara, Masahiko;Kanai, Kaname;Ouchi, Yukio;Seki, Kazuhiko;Noh, Jaegeun
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권8호
    • /
    • pp.1755-1759
    • /
    • 2009
  • Surface structure and molecular orientation of self-assembled monolayers (SAMs) formed by the spontaneous adsorption of tetrahydrothiophene (THT) and thiophene (TP) on Au(111) were investigated by means of scanning tunneling microscopy (STM) and carbon K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy. STM imaging revealed that THT SAMs have a commensurate (3 ${\times}\;2\sqrt[]{3}$) structure containing structural defects in ordered domains, whereas TP SAMs are composed of randomly adsorbed domains and paired molecular row domains that can be described as an incommensurate packing structure. The NEXAFS spectroscopy study showed that the average tilt angle of the aliphatic THT ring and $\pi$-conjugated TP ring in the SAMs were calculated to be about $30^o\;and\;40^o$, respectively, from the surface normal. It was also observed that the $\pi$* transition peak in the NEXAFS spectrum of the TP SAMs is very weak, suggesting that a strong interaction between $\pi$-electrons and the Au surface arises during the self-assembly of TP molecules. In this study, we have clearly demonstrated that the surface structure and adsorption orientation of organic SAMs on Au(111) are strongly influenced by whether the cyclic ring is saturated or unsaturated.

디인터레이싱을 위한 방향지향 보간법의 개선 (Improvement of Direction-Oriented Interpolation for Deinterlacing)

  • 박도영;이연경;유훈
    • 한국정보통신학회논문지
    • /
    • 제18권9호
    • /
    • pp.2209-2215
    • /
    • 2014
  • 본 논문은 DOI방법을 개선한 디인터레이싱 방법을 제안한다. DOI방법은 강력한 인트라필드 기반의 디인터레이싱 기술이지만 긴 연산시간과 주기적인 패턴에서 방향을 잘못 찾는 문제를 가지고 있다. 이 문제를 해결하기 위해 기존의 전역검색 대신하여 2단계 검색을 하여 연산속도를 향상시키고 두 가지 과정을 추가하여 영상의 화질을 개선하는 방법을 제안한다. 첫 번째 단계로 잘못된 방향으로 찾은 공간벡터를 삭제하며 두 번째 단계로 찾지 못한 방향에 대한 공간 방향벡터를 삽입함으로써 제안된 방법에서 잘못 찾은 공간 방향벡터를 정확한 결과인지 재확인하여 픽셀의 보간에 사용할지 검사한다. ISO 실험 이미지를 이용하여 제안된 방법과 line evarage, edge-based line averaging, DOI, selective deinterlacing algorithm 등의 기존의 방법을 비교한 결과 제안된 방법이 객관적으로나 주관적으로 우 수하다는 것을 보였다.

CR 영상에서 기저선 보정을 위한 1차원 모폴로지컬 필터의 이용에 관한 연구 (Baseline Correction in Computed Radiography Images with 1D Morphological Filter)

  • 김용권;류연철
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제45권5호
    • /
    • pp.397-405
    • /
    • 2022
  • Computed radiography (CR) systems, which convert an analog signal recorded on a cassette into a digital image, combine the characteristics of analog and digital imaging systems. Compared to digital radiography (DR) systems, CR systems have presented difficulties in evaluating system performance because of their lower detective quantum efficiency, their lower signal-to-noise ratio (SNR), and lower modulation transfer function (MTF). During the step of energy-storing and reading out, a baseline offset occurs in the edge area and makes low-frequency overestimation. The low-frequency offset component in the line spread function (LSF) critically affects the MTF and other image-analysis or qualification processes. In this study, we developed the method of baseline correction using mathematical morphology to determine the LSF and MTF of CR systems accurately. We presented a baseline correction that used a morphological filter to effectively remove the low-frequency offset from the LSF. We also tried an MTF evaluation of the CR system to demonstrate the effectiveness of the baseline correction. The MTF with a 3-pixel structuring element (SE) fluctuated since it overestimated the low-frequency component. This overestimation led the algorithm to over-compensate in the low-frequency region so that high-frequency components appeared relatively strong. The MTFs with between 11- and 15-pixel SEs showed little variation. Compared to spatial or frequency filtering that eliminated baseline effects in the edge spread function, our algorithm performed better at precisely locating the edge position and the averaged LSF was narrower.

Nonlinearity effect on the dynamic behavior of the clayey basin edge

  • Hadi Khanbabazadeh
    • Geomechanics and Engineering
    • /
    • 제36권4호
    • /
    • pp.367-380
    • /
    • 2024
  • Investigations has shown that the correct estimation of the effective amplification period is as important as the amplification value itself. It gets more important in 2D basins. This study presents a quantitative coefficient for consideration of the nonlinearity effect in terms of amplification value and the shift in its period which is missing or ineffectively considered in the previous studies. To attain this goal, by the application of a time domain fully nonlinear method, the deviation of the more common equivalent linear results from the basin nonlinear behavior under strong ground motions is investigated quantitatively. Also, despite the increase in the damping ratio, the possibility of the increase in the amplification due to the increase in motion strength is shown. To make the results useful in engineering practice, by introducing nonlinearity ratio, the effect of the nonlinearity is quantitatively estimated for two soft and stiff clayey basins with three different depths under a set of motions scaled to two target spectrum. Results show that at the 100 m depth soft clayey basin, while the nonlinearity ratio shows a 35% deviation at the basin edge part under DD1 motion level, its effect moves to the central part with 20% effect under DD3 motion level. By the increase in depth to 150 m, the results show a decrease in the overall effect of the nonlinear behavior for both clay types. At this depth, the nonlinearity ratio gives a 30% and 17% difference on a limited distance from outcrop at the soft clayey basin under DD1 and DD3 motion levels, respectively. At the 30 m depth basins, the nonlinearity ratio shows up to 25% difference for different cases. The presented ratio would be introduced as nonlinearity coefficients for consideration of the nonlinearity effects in the codes. The presented quantitative margins will help the designer to have a better understanding of the amplification period change because of nonlinearity over 2D basin surface.

Unsteady Analysis of Impeller-Volute Interaction in Centrifugal Pump

  • Cheah, Kean Wee;Lee, Thong See;Winoto, Sonny H.
    • International Journal of Fluid Machinery and Systems
    • /
    • 제4권3호
    • /
    • pp.349-359
    • /
    • 2011
  • An unsteady numerical analysis has been carried out to study the strong impeller volute interaction of a centrifugal pump with six backward swept blades shrouded impeller. The numerical analysis is done by solving the three-dimensional Reynolds Averaged Navier-Stokes codes with standard k-${\varepsilon}$ two-equations turbulence model and wall regions are modeled with a scalable log-law wall function. The flow within the impeller passage is very smooth and following the curvature of the blade in stream-wise direction. However, the analysis shows that there is a recirculation zone near the leading edge even at design point. When the flow is discharged into volute casing circumferentially from the impeller outlet, the high velocity flow is severely distorted and formed a spiraling vortex flow within the volute casing. A spatial and temporal wake flow core development is captured dynamically and shows how the wake core diffuses. Near volute tongue region, the impeller/volute tongue strong interaction is observed based on the periodically fluctuating pressure at outlet. The results of existing analysis also proved that the pressure fluctuation periodically is due to the position of impeller blade relative to tongue.

Characteristics of Vortical Jet Structures of a Hydrofoil

  • Yang, Chang-Jo;Kim, You-Taek;Choi, Min-Seon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제31권7호
    • /
    • pp.842-851
    • /
    • 2007
  • Oscillating foil propulsion, the engineering application of fish-like movement of a hydrofoil, has received in recent decades as a possible competitor for propellers. The oscillating foil produces an effective angle of attack, resulting in a normal force vector with thrust and lift components, and it can be expected to be a new highly effective propulsion system. We have explored propulsion hydrodynamics as a concept in wake flow pattern. The present study has been examined various conditions such as oscillating frequencies and amplitudes in NACA0010 profile. Flow visualizations showed that high thrust was associated with the generation of moderately strong vortices, which subsequently combine with trailing-edge vorticity leading to the formation of a reverse $K\acute{a}rm\acute{a}n$ vortex street. Vortex generation was inherent to jet production and playeda fundamental role in the wake dynamics. And it was shown that the strong thrust coefficient obtained as the Strouhal number was larger.

일반류가 수평대류에 미치는 영향에 관한 수치연구 (A Numerical Study of a Effect of the Uniform Flow in Horizontal Convection)

  • 이화운;김유근;정우식
    • 한국환경과학회지
    • /
    • 제7권3호
    • /
    • pp.349-360
    • /
    • 1998
  • Effects of uniform flow on a two-dimensional mesoscale horizontal convection were investigated by using the vorticity and thermodynamic equations. For thins purpose, We simulated properties of a thermal convection m a stably stratified Boussinesq flued caused by partial heating at the center of a lower boundary If we don't consider effects of the uniform flow, the convection takes the form of aidsymmetrlc with respect to the z-alds. But when uniform flow Is strong, velocity field and temperature field consist of a sin91e cell structure which spreads upstream side of the partial heating area. The flow pattern for strong uniform flows takes the form of positive temperatue near the ground and negative temperature perturbation soft over the partial heating area, and downward motion directly over the upwind portion of the partial heating area and upward motion on the downstream side. The downstream edge of the upstream cell Is shifted in the downstream direction with the Increase of uniform flow almost linearly.

  • PDF