• 한국임상수의학회지
• /
• 제27권3호
• /
• pp.216-219
• /
• 2010

본 연구의 목적은 개 피부장벽 손상모델을 실험적으로 구현하기 위해 개의 정상피부, 제모 된 피부 그리고 아세톤 및 테잎 스트리립핑에 의한 손상된 피부에서의 표피내 칼슘이온의 분포를 관찰하였다. 피부손상에 따른 표피의 칼슘이온 변화도는 화학적 표시자(Calcium Green-1)가 포함된 gel blotting을 적용하여 피부장벽손상 효과를 시간에 따라 형광현미경으로 관찰하였다. 아세톤 손상 후 3분 및 1시간에 표피와 모낭의 칼슘이온의 차이를 나타내는 형광도차는 보다 밝게 관찰된 후 48시간 후에 소실되었다. 이와는 대조적으로, 테잎스트립핑손상 후 3분 및 1시간의 표피 칼슘이온의 형광도차는 아세톤 손상에서보다 더 밝게 보였다가 48시간 후에 소실되었다. 본 실험상의 방법을 통해 피부 손상 방법에 따른 표피 칼슘이온의 가시적 이미지를 관찰할 수 있었고, 표피내 농도차이를 확인할 수 있었다. 따라서 본 화학표시자를 이용한 염색법은 개 피부장벽 복구기전에 대한 칼슘이온의 역할을 규명하는데 유용할 것으로 판단되며, 추후 표피칼슘이온 농도의 정량분석법에 관한 연구가 필요할 것으로 사료된다.

• 자원환경지질
• /
• 제28권6호
• /
• pp.553-558
• /
• 1995

본 논문에서는 깊이에 따라 밀도값과 (종파)속도값이 변하는 지하 하부층들의 반사계수로부터 밀도와 속도 주상도를 구하는 알고리즘을 개발하고자 하였다 하향연속(下向連續) 혹은 박층(剝層 layer stripping) 방식 알고리즘은 적분방정식을 이용한 계산법보다 계산 과정을 상당히 줄일 수 있다. 본 논문에서는 여러 방향으로의 입사파에 의한 반사계수를 개선된 하향연속 알고리즘을 이용하여 처리하였으며, 각 깊이에서 최소자승 맞춤(fitting)을 실행하였다. 본 연구결과는 다른 하향연속 알고리즘에 비하여 상당한 성과를 보여주고 있다.

• 대한화학회지
• /
• 제43권1호
• /
• pp.36-41
• /
• 1999

Mercaptoacetic acid를 이용하여 흡착벗김 전압전류법으로 미량의 게르마늄을 정량하는 방법을 연구하였다. 이때 지지전해질은 0.25 M NaCl 용액(pH 6.0)을 사용하였고, mercaptoacetic acid의 농도는 $5.0{\times}10^{-6}M$이 되도록 조절하여 실험하였다. Ge(IV)-Mercaptoacetic acid 착물의 봉우리 전위는 -1.402V vs. Ag/AgCl에서 나타났다. 착물의 봉우리 전위에 미치는 NaCl의 농도, mercaptoacetic acid의 농도, 축적 시간등에 대하여 조사하였다. 또한, Amberlite IRC-718 킬레이트 수지를 다른 이온들로 부터 Ge(IV)을 분리하는데 적용하였다.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.23-31
• /
• 2018

In this study, a new method called as multi-dropped liquid membrane (MDLM) which is more practical and more effective than other liquid membrane techniques is applied for transport of Zn(II) has been studied. HCl as the stripping solution and D2EHPA dissolved in kerosene as the membrane solution, has been examined. The effects of stripping solution concentration, carrier concentration, temperature and pH in the feed phase on the transport of Zn(II) have also been investigated. As a result, the optimum transport conditions of Zn(II) were obtained, i.e., the concentration of HCl solution was 0.25 M, the concentration of D2EHPA was $8{\times}10^{-3}M$, and pH value in the donor phase was 5.00. Under the optimum conditions, the transport percentage of Zn(II) was up to >99% during the transport time of 80 min when the initial concentration of Zn(II) was $120mgL^{-1}$. The activation energy is calculated as $5.30kcalmol^{-1}$. The value of calculated activation energy indicates that the process is diffusionally controlled by Zn(II) ions. The experiments have demonstrated that D2EHPA derivative is a good carrier for Zn(II) transport through MDLM in the study.

• 대한화학회지
• /
• 제51권5호
• /
• pp.412-417
• /
• 2007

DNA를 고정한 탄소나노튜브 페이스트 전극으로 옥시테트라싸이클린 항생제의 분석조건을 연구하였다. 사각 파형 벗김 전압전류법과 순환 전압 전류법을 사용하여 최적조건에서 1-10 ngL?1의 정량 가능 범위에 도달하였다. 벗김법 0.1 mgL?1 농도에서 15번 반복 측정하여 0.068%의 상대표준편차였으며, 벗김법 최적 분석 조건에서 0.4 ngL?1의 검출 한계를 얻었다. 개발된 결과를 양식어류의 세포에서 응용하였다.

• 센서학회지
• /
• 제24권1호
• /
• pp.29-34
• /
• 2015

This study aimed to evaluate the characterization of a metal oxide semiconductor and electrochemical gas sensor array for measuring wastewater odor. The sensitivity of all gas sensors observed in sampling method by stripping was 6.7 to 20.6 times higher than that by no stripping, except sensor D (electrochemical gas sensor). The average reduction ratio of sensor signal as a function of initial dilution rate of wastewater was in the order of food plant > food waste reutilization facility > plating plant. The sensitivity of gas sensors was dependent on both the type of wastewater and the dilution rate. The sensor signals observed by the gas sensor array were correlated with the dilution factor (OU) calculated by the air dilution sensory test with several wastewater ($r^2=0.920{\sim}0.997$), except the sensor signals of sensor D measured in the plating plant wastewater. It seems likely that the gas sensor array plays a role in the evaluation of odor in wastewater and is useful tool for on-site odor monitoring in the wastewater facilities.

• 연구논문집
• /
• 통권33호
• /
• pp.99-109
• /
• 2003

Recently the utilization of the ozone dissolved de-ionized water(DIW-$O_3$) in semiconductor wet cleaning process and photoresist stripping process to replace the conventional sulfuric acid and hydro peroxide mixture(SPM) method has been studied. In this paper, we propose the water-electrode type ozone generator which has the characteristics of the high concentration and purity to produce the high concentration DIW-$O_3$ for the photoresist strip process in the semiconductor fabrication. The proposed ozone generator has the dual dielectric tube structure of silent discharge type and the water is both used to electrode and cooling water. Through this study, we obtained the results of the 10.3 wt% of ozone gas concentration at the oxygen gas of 0.5 [liter/min.] and the DIW-$O_3$ concentration of 79.5 ppm.. Through the photoresist stripping test using the produced DIW-$O_3$, we confirmed that the photoresist coated on the silicon wafer was removed effectively in the 12 minutes.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2949-2954
• /
• 2010

Ionic liquid-functionalized ordered mesoporous silica SBA-15 modified carbon paste electrode (CISPE) was fabricated and its electrochemical performance was investigated by cyclic voltammetry, electrochemical impedance spectra. The electrochemical behavior of $Cd^{2+}$, $Pb^{2+}$, $Cu^{2+}$ and $Hg^{2+}$ at CISPE was studied by differential pulse anodic stripping voltammetry (DPASV). Compared with carbon paste electrode, the stripping peak currents had a significant increase at CISPE. Under the optimized conditions, the detection limits were $8.0{\times}10^{-8}\;M$ ($Cd^{2+}$), $4.0{\times}10^{-8}\;M$ ($Pb^{2+}$), $6.0{\times}10^{-8}\;M$ ($Cu^{2+}$), $1.0{\times}10^{-8}\;M$ ($Hg^{2+}$), respectively. Furthermore, the present method was applied to the determination of $Cd^{2+}$, $Pb^{2+}$, $Cu^{2+}$ and $Hg^{2+}$ in water samples and people hair sample.

• 전기화학회지
• /
• 제7권1호
• /
• pp.9-15
• /
• 2004

Cyclic voltammetry and chronocoulometry have been used for characterization of catechol violet (CV) at the hanging mercury drop electrode in acetic acid-sodium acetate buffer solution. At pH 2.94 a nearly symmetric cyclic voltammetric wave due to an irreversible weak adsorption of CV on mercury was obtained at concentration of $0.53{\mu}mol\;dm ^{-3}$. Under these conditions, CV adsorbes in a monolayer. Upon increasing the concentration, the symmetry of the wave decreases; it can be attributed to a mixed diffusion adsorption process. The amount of the adsorbed catechol violet on the HMDE expressed as surface concentration as well as the surface areaf occupied by one molecule$(\sigma)$ were calculated. It was found that the values obtained for f and o utilizing cyclic voltammetric and chrono-coulometry are almost identical. A 1:1 and 1:2 Th (IV)-CV complexes are formed on addition of thorium (IV) to catechol violet. These complexes are adsorbed and reduced on the HMDE at more negative potentials than the peak potential of free CV, Using the square-wave (SW) technique, the adsorptive cathodic stripping voltammetry, ACSV, of these complexes was studied. It was found that the SW-ACSV of Th(IV)-CV can be applied to the determination of thorium at the nanomole level. Optimum conditions and the analytical method of determination were presented and discussed.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.849-855
• /
• 2006

Taste and odor (T&O) problems in drinking water supplies caused by eutrophication have become increasingly important because aesthetic qualities are the primary measures by which consumers estimate the quality of their drinking water. In order to overcome T&O problem, it is necessary to early detection method for T&O compounds before these compounds enter to water treatment plant. In this background, a early waming device for T&O compounds was developed and its performance tested under different operating condition. According to the experimental results on the adsorption efficiency of T&O compounds, when the raw water flowrate was 5 mL/min, the optimum stripping time and air flowrate were 5 hrs and 0.5 L/min, respectively. Comparison of activated carbon showed that foreign activated carbon was better than domestic activated carbon in terms of adsorption efficiency.