• Resources Recycling
• /
• v.11 no.6
• /
• pp.18-23
• /
• 2002

A study on the solvent extraction of hexavalent chromium from aqueous solutions has been investigated. The results showed that the extraction efficiency of chromium increased in proportion to extractant concentration. Aliquat 336 of quarternary amine effectively extracted hexavalent chromium and was superior to Alamine 336. And the stabilizers like polyhydric alcohols of octanol, decanol and dodecanol showed the similar effect fur prevention of third phase and a little promotion of extraction efficiency in comparison with non-use of polyhydric alcohols. On the other hand, in solvent extraction of hexavalent chromium from aqueous solutions, the hexavalent chromium was completely extracted at pH range lower than 7 with 1% Aliquat 336 as extractant and 5% decanol as stabilizer and the hexavalent chromium in extractant was completely stripped with 1M sodium hydroxide solution in the stripping step.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.37-43
• /
• 2014

A study has been made on the recovery of tin and copper from waste solder stripper by oxalate precipitation. With the increasing of the oxalic acid addition, tin was precipitated effectively and removed above 99.5% of tin when the oxalic acid, in an amount 1.0-1.5 times the stoichometric requirement, was added. But, in this case, only 2.0% of copper was precipitated and lead, iron were not precipitated. So, tin was selectively removed from the waste solution. With the increasing of the reaction temperature, the removal percentage of tin was increased and maximum value at arounf $60^{\circ}C$ and decreased with increase in the temperature any more. After filtering the precipitate and drying in oven, $SnO_2$ was obtained from the precipitate. After removal of tin in stripping solution, above 91% of copper was selectively removed by Cu-oxalate by addition of oxalic acid.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.26-31
• /
• 2017

LIX 63 showed a selectivity for the extraction of Pd(II) over other PGMs, such as Pt(IV), Ir(IV) and Rh(III) from 6 M HCl solution. Moreover, HCl solution has significant effect on the oxidation-reduction reaction between Ir(IV) and LIX 63. Therefore, the applicability of employing LIX 63 for the separation of the 4 PGMs was investigated from 3 M HCl solution. From 3 M HCl solution, only Pd(II) was selectively extracted by LIX 63 and its extraction percentage was higher than from 6 M HCl solution. Extraction of the Pd(II) free raffinate with TBP led to the selective extraction of Pt(IV). After oxidation of Ir(III) with $NaClO_3$ to Ir(IV), extraction of the Pt(IV) free raffinate with Aliquat 336 selectively extracted Ir(IV). For each extraction step, optimum stripping conditions were obtained. By this process, it was possible to separate the 4 PGMs by solvent extraction from 3 M HCl solution.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.2
• /
• pp.77-83
• /
• 2009

In this study, a test has been carried out to solve the problem with ground granulated blast-furnace slag, low early strength & lack of supply and to find out a way to use as concrete admixture of the ultrafine blaine air cooling slag which is all disposed as the by product of air cooling slag and its test was conducted to the replacement rate of ultrafine blaine air cooling slag & mixing condition of every concrete admixtures by type for the purpose of obtaining later a basic data for practical use of the cement that used ultrafine blaine air cooling slag by conducting comparative analysis. If ultrafine-blaine air cooling slag is used to the concrete following the results, a high efficiency water reducing agent won't be needed much for flow acquisition due to a high increase in flow, and the stripping time of concrete form will be shortened thanks to the acquisition of early strength, And though, it has the problems with long term strength which is similar or a little lower than the 3 types of ground granulated blast-furnace slag, it's still applicable as the substitute materials for 3 types of ground granulated blast-furnace slag at 10, 15% replacement rate of ultrafine-blaine air cooling slag, at which it shows higher activation index than 3 types of ground granulated blast-furnace slag.

• Journal of the Korean Chemical Society
• /
• v.41 no.8
• /
• pp.392-398
• /
• 1997

A method of selective determination of inorganic and organic mercury compounds has been described. The $CHCl_3$ solution of a high molecular quaternary alkylammonium salt, Aliquat 336 was used for the simultaneous preconcentration of both inorganic, $Hg^{2+}$ as its thiocyanate complex, and organic mercury compounds, $CH_3HgCl$ and $C_2H_3O_2$ $HgC_6H_5$ by extraction from their aqueous solution. Selective separation of the inorganic mercury from the extract was followed by stripping with 3 M $HClO_4 $ solution for the subsequent determination by CVAAS. Organic mercury was also determined by CVAAS after removal of $CHCl_3solvent$ from the extract and decomposition of the residue with 4% $KMnO_4 $-1 MH_2$S0_4$. The mixtures of inorganic and organic mercury compounds contained 1.0 $\mug$ as Hg in 50 mL of sample solution(0.02 ${\mu}gHg/mL$) were analysed within ${\pm}6%$ by absolute errors.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.26-39
• /
• 2020

The physical properties of silica-filled SBR compounds (WSBR) prepared using silica-SBR wet masterbatches (WMB) were systematically investigated to understand the effect of the surface treatment of silica on the reinforcement performance of SBR. Treatment of silica with bis(triethoxysilylpropyl)tetrasulfide (TESPT) in the liquid phase, followed by mixing with an SBR solution and recovery by water stripping, easily produced silica-SBR WMB. However, insufficient surface treatment in terms of the amount and stability of the incorporated TESPT led to considerable silica loss and inevitable TESPT elution. Pretreatment of silica in the gas phase with TESPT and another organic material that enabled the formation of organic networks among the silica particles on the surface provided hydrophobated silica, which could be used to produce silica-SBR WMB, in high yields of above 99%. The amount and type of organic material incorporated into silica greatly influenced the cure characteristics, processability, and tensile and dynamic properties of the WSBR compounds. The TESPT and organic material stably incorporated into silica increased their viscosity, while the organic networks dispersed on the silica surface were highly beneficial for reducing their rolling resistance. Excessive dosing of TESTP induced low viscosity and a high modulus. The presence of connection bonds formed by the reaction of glycidyloxy groups with amine groups on the silica surface resulted in physical entanglement of the rubber chains with the bonds in the WSBR compounds, leading to low rolling resistance without sacrificing the mechanical properties. Mixing of the hydrophobated silica with a rubber solution in the liquid phase improved the silica dispersion of WSBR compounds, as confirmed by their low Payne effect, and preservation of the low modulus enhanced the degree of entanglement.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.209-215
• /
• 2014

We report on the electrocatalytic activities at Pt nanostructure surfaces electrodeposited with different deposition charges on indium tin oxide electrodes for oxygen reduction and methanol oxidation reactions. The surface properties of Pt nanostructures depending on deposition charges were characterized by scanning electron microscopy, electrochemical surface area measurement, X-ray diffraction, and CO stripping analysis, which were correlated to the electrocatalytic activities. Pt nanostructures with deposition charge of 0.03 C exhibited the highest electrocatalytic activity for oxygen reduction and methanol oxidation. The sharp sites of Pt nanostructure and the presence of highly active facet play a key role, whereas the electrochemical surface area does not significantly affect the electrocatalytic activity. The results obtained in this work with regard to the dependence of electrocatalytic activity on the variation of the Pt nanostructures will give insights into the development of advanced electrocatalytic systems.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.31-37
• /
• 2008

Diffused Aeration System (DAS) is one of the remediation methods used for removing contaminants in groundwater and this method brings air bubbles in contact with contaminated water, afterwards transferring contaminants in liquid phase into air phase. In this study, three applicability tests using DAS were conducted in two highly contaminated sites. For these tests, diffused air bubbles are generated with a in-flow rate of 17.1, 44.8 and 76.5 (1/min), respectively. The concentrations of TCE in grounwater and air phase were measured during the tests. The measured results showed that TCE concentration hit the highest value after 6~8 min and afterwards decreased gradually. Also, it was observed that the TCE concentration in air phase changed depending on the rate of diffused aeration. In addition, $K_La$ values from liquid to air phase were calculated based on the test results and those of three tests (test 1, 2 3) were 0.444, 1.158 and 1.836(1/hr), respectively. From the comparison of $K_La$ values, the faster air in-flow rate is, the higher the efficiency of the DAS is.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.50-56
• /
• 2016

Extraction behaviour of silver from nitric acid solutions by Cyanex 301 as an extractant was examined. Detailed studies have been conducted to evaluate the effect of different variables influencing the extraction such as concentration of nitric acid and extractant, phase ratio(O/A) and synergism of mixed extractant. The extraction behaviour of associated metals namely Ca, Al, Fe, Zn and Sr has been investigated. The extraction results show that Ag can be extracted effectively by Cyanex 301 and selectively extracted from 3.0M $HNO_3$ using 5% Cyanex 301. Impurity metals loaded in organic phase can be effective scrubbed by 4.0M HCl. Finally, pure silver solution can be obtained efficiently by thiourea as a stripping reagent.

• Korean Journal of Veterinary Service
• /
• v.16 no.1
• /
• pp.1-10
• /
• 1993

Samples of bulk herd milk, foremilk, last milk (stripping) and individual cow sample were collected and their somatic cell number were counted with Fossomatic counter (FCC), Coulter counter(CC), direct microscopic somatic cell count(DMSCC) and Califormia mastitis test (CMT), The results were compared and summarized as follows : 1. Mean somatic cell counts of 120 bulk herd milk samples obtained by DMSCC, FCC and CC were 433,203, 481,213 and 676,245 respectively. 2. Mean somatic cell counts of 116 foremilk samples obtained by DMSCC, FCC and CC were 515,035, 611,845 and 725,051 respectively 3. Mean somatic cell counts of 87 last milk samples obtained by DMSCC, FCC and CC were 718,506, 839,874 and 1,041,160 respectively. 4. Mean somatic cell counts of 57 individual cow samples obtained by DMSCC, FCC and CC were 449,258, 491,018 and 521,315 respectively. 5. Mean somatic cell counts of all samples increased with the increasing CMT score, and the cell counts were higher by CC than by FCC. 6. The correlation coefficients between the somatic cell counts by CMT and CC were 0.926 in bulk herd milk, 0.707 in foremilk 0.688 in last milk and 0.675 in individual cow sample, respectively 7. The correlation coefficients between the somatic cell counts by CMT and FCC were 0. 945 in bulk herd milk, 0.705 in foremilk 0.694 in last milk and 0.727 in individual cow sample, respectively. 8. The correlation coefficients between the somatic cell counts by CC and FCC were 0.978 in bulk herd milk, 0.997 in foremilk 0.983 in last milk and 0.985 in individual cow sample, respectively.