• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (3)
• /
• pp.576-578
• /
• 2000

현재의 대부분의 VOD System에서는 Single Server System의 제약인 확장성과 안정적 서비스를 제공하기 위해 Multi-Server System을 사용하고 있다. Multiple Server에 Video Data를 Striping한 구조를 Parallel Video Server Architecture라 한다. 본 연구에서는 Parallel Video Server System 상에서 Data의 Striping Policy에 대해 고찰해보고 이때 발생하는 load balancing과 redundancy 문제의 해결책을 제시하였다. 또한 이를 실제 local Network 시스템에 적용하여 구현하였다.

• 한국전산유체공학회지
• /
• 제10권4호통권31호
• /
• pp.1-11
• /
• 2005

A numerical study of the evaluation of turbulence models for thermal striping phenomenon is performed. The turbulence models chosen in the present study are the two-layer model, the shear stress transport (SST) model and the V2-f model. These three models are applied to the analysis of the triple-jet flow with the same velocity but different temperatures. The unsteady Reynolds-averaged Navier-Stokes (URANS) equation method is used together with the SIMPLEC algorithm. The results of the present study show that the temporal oscillation of temperature is predicted by the SST and V2-f models, and the accuracy of the mean velocity, the turbulent shear stress and the mean temperature is a little dependent on the turbulence model used. In addition, it is shown that both the two-layer and SST models have nearly the same capability predicting the thermal striping, and the amplitude of the temperature fluctuation is predicted best by the V2-f model.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.142-147
• /
• 2005

A numerical study of evaluation of turbulence models for thermal striping phenomenon is performed. The turbulence models chosen in the present study are the two-layer model, the shear stress transport (SST) model and the V2-f model. These three models are applied to the analysis of the triple jet flow with the same velocity but different temperature. The unsteady Reynolds-averaged Navier-Stokes (URANS) equation method is used together with the SIMPLE algorithm. The results of the present study show that the temporal oscillation of temperature is predicted only by the V2-f model, and the accuracy of the mean velocity, the turbulent shear stress and the mean temperature is a little dependent on the turbulence model used. The the two-layer model and the SST model shows nearly the same capability of predicting the thermal striping and the amplitude of the temperature fluctuation is predicted best by the V2-f model.

• 한국정보과학회논문지:정보통신
• /
• 제28권3호
• /
• pp.426-434
• /
• 2001

병렬 VOD 시스템에서 스트라이핑 정책은 비디오 데이터를 분할 하여 각 노드에 잘 정의된 순서로 분배함으로서 노드간에 부하 균등을 통한 시스템의 성능을 높일 수 있는 중요한 기법이다. 본 논문운 노드를 추가할 경우 노드간의 부하 균등을 고려한 데이터 스트라이핑 기법을 제시한다. 병렬 VOD 서버의 추가된 노드에 새 비디오 파일을 저장할 경우 그 노드에 부하가 집중되어 시스템의 성능이 떨어질수 있기 때문에 적절한 새 노드에 이동시켜 배치시키고 새 비디오 파일을 각 노드에 분배시키는 3 가지 스트라이핑 기법들을 제시한후 실험 분석을 통하여 이 기법들을 비교 평가하였다. 그 결과 FSM 양방향 기법이 가장 좋은 성능을 보였다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3928-3942
• /
• 2022

Thermal striping is a complex thermal-hydraulic phenomenon caused by fluid temperature fluctuations that can also cause high-cycle thermal fatigue to the structural wall of sodium-cooled fast reactors (SFRs). Numerical simulations using large-eddy simulation (LES) were performed to predict and evaluate the characteristics of the temperature fluctuations related to thermal striping in the upper internal structure (UIS) of the prototype generation-IV sodium-cooled fast reactor (PGSFR). Specific monitoring points were established for the fluid region near the control rod driving mechanism (CRDM) guide tubes, CRDM guide tube walls, and UIS support plates, and the normalized mean and fluctuating temperatures were investigated at these points. It was found that the location of the maximum amplitude of the temperature fluctuations in the UIS was the lowest end of the inner wall of the CRDM guide tube, and the maximum value of the normalized fluctuating temperatures was 17.2%. The frequency of the maximum temperature fluctuation on the CRDM guide tube walls, which is an important factor in thermal striping, was also analyzed using the fast Fourier transform analysis. These results can be used for the structural integrity evaluation of the UIS in SFR.

• 정보교육학회논문지
• /
• 제2권1호
• /
• pp.10-18
• /
• 1998

In a VOD server, media data are usually encoded by VBR compression technique such as MPEG, therefore, media stream rates vary. We propose a striping strategy called VCS considering VBR compression in Clustered VOD servers. Simulation are conducted to evaluate and compare the new strategy with a known striping strategy. The results show that the VCS strategy improves the performance.

• Journal of Information Processing Systems
• /
• 제4권1호
• /
• pp.1-8
• /
• 2008

In this paper, we discuss the use of fragmented bandwidth to improve the performance of staggered striping in a multimedia system. It is observed that potential disruptions can occur when nonconsecutive idle disks are used for displaying multimedia objects. We have identified useful retrieval patterns and shown that with proper selections of fragmented disks and a simple buffering scheme, disruptions can be easily eliminated.

• 한국축산식품학회지
• /
• 제39권3호
• /
• pp.410-417
• /
• 2019

The aim of this study is to evaluate the incidence of white striping abnormality and its consequences on the quality traits of raw and processed turkey breast (chemical composition, color traits, and water holding capacity). In total, about 2300 breasts from 22 flocks were used to assess the incidence and 60 breasts to evaluate the quality traits. Our study showed that the total incidence of moderate and severe white striping was 61.3% out of them, moderate cases were 49.4%. Severe white striped turkey breast exhibited significantly lower protein content (21.1 vs. 23.2 and 23.16%, p<0.05) and higher fat content (2.3 vs. 0.77 and 1.76%, p<0.05) if compared to normal and moderate white striped breast respectively. Moreover, moderate and severe white striped meat showed significantly higher redness (a*) (2.98 and 3.14 vs. 1.48, p<0.05) and yellowness (b*) indexes (7.27 and 7.95 vs. 4.05, p<0.05) than normal meat, respectively.

• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.267-275
• /
• 1999

This paper deals with the industrial problem of thermal striping damage on the French prototype fast breeder reactor, Phenix and it was studied in coordination with the research program of IAEA. The thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the tee-junction of the secondary piping using Green's function method and standard FEM is presented. The thermohydraulic(T/H) loading condition used in the present analysis is the random type thermal loads computed by T/H analysis on the turbulent mixing of the two flows with different temperatures. The thermomechanical fatigue damage was evaluated according to ASME code section 111 subsection NH. The results of the fatigue analysis showed that fatigue failure would occur at the welded joint within 90,000 hours of operation. The assessment for the fracture behavior of the welded joint showed that the crack would be initiated at an early stage in the operation. It took 42,698.9 hours for the crack to propagate up to 5 mm along the thickness direction. After then, however, the instability analysis, using tearing modulus, showed that the crack would be arrested, which was in agreement with the actual observation of the crack. An efficient analysis procedure using Green's function approach for the crack propagation problem under random type load was proposed in this study. The analysis results showed good agreement with those of the practical observations.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.44-50
• /
• 2011

Turbulent mixing of hot and cold coolants is one of the possible causes of high cycle thermal fatigue in piping systems of nuclear power plants. A typical situation for such mixing appears in turbulent flow through a T-junction. Since the high cycle thermal fatigue caused by thermal striping was not considered in the piping fatigue design in several nuclear power plants, it is very important to evaluate the effect of thermal striping on the integrity of mixing tees. In the present work, before conducting detailed evaluation, three thermal striping evaluation methodology suggested by EPRI, JSME and NESC are analyzed. Then, a by-pass pipe connected to the shutdown cooling system heat exchanger is investigated by using these evaluation methodology. Consequently, the resulting thermal stresses and the fatigue life of the mixing tee are reviewed and compared to each other. Futhermore, the limitation of each methodology are also presented in this paper.