• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.647-655
• /
• 2003

Commonly used SAW duplexers have a difficulty on manufacture so that a transmission line is printed on the package or an LTCC multi-layer is needed because a quarter-wave transmission line which is a kind of an isolation network is applied to the SAW duplexers. In this study, new structures of one chip type SAW duplexers are proposed. In the proposed structure, Tx and Rx SAW ladder filters and isolation networks are located on a single 36LiTaO$_3$ piezoelectric substrate. The manufacture process is very simple than commonly used product. It is possible to improve tile performance by means of optimizing the micro-strip line lumped elements. It is easy to integrate and modulate with other surrounding components. The optimal design techniques can be applied to other kind of multi-port devices.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.4
• /
• pp.37-44
• /
• 2012

This paper describes large scale pullout test results, in order to evaluate extensibility effect of strip-type reinforcement. The same test for ribbed steel strip reinforcement also is conducted to compare the friction resistance reinforcements' evaluation results. The pullout resistance of the ribbed steel strip reinforcement, which has a small cross sectional areas, was better than the friction resistance reinforcements' due to the bearing (passive) resistance. In case of friction resistance reinforcements, the pullout resistance of extensible reinforcement was better than inextensible reinforcement' even though they have a similar cross sectional areas.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.4
• /
• pp.242-248
• /
• 2012

The measurement of residual chlorine as a disinfectant is very important to ensure the safety against the pathogenic microbes and to suppress injection. The portable free chlorine sensor was fabricated with a disposable strip format by a screen printing method. The strip sensors prepared with a carbon-Ag/AgCl(cathode-anode) combination exhibited less interfering responses towards combined chlorine species(especially $NHCl_2$) and oxygen than the sensors prepared with other metals(i.e., gold and platinum). Free chlorine was determined chronoamperometrically with carbon-based electrodes at an applied potential of -0.3 V(vs. Ag/AgCl). A channel was built on the strip-type electrode for easy sampling, and the resulting strip sensors were employed to determine the concentrations of residual free chlorine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.588-593
• /
• 2011

For the progressive notching and forming die, analyzing beforehand according to the interpretation of thin plate molding for massive production is essential. In this study, we dealt with Ez5 particularly its strip layout design based on the exported die as ordered by Japanese S automobile company's local factory in the USA. We completed the strip layout design consisting of 13 processes by optimizing the blank layout with arrays of a single carrier with wide width drawn in 1 row. This type of die is expected to be ordered in bulk frequently and at the same time via the Internet; any company with die technology will be required to cope with such type of die.

• Steel and Composite Structures
• /
• v.33 no.5
• /
• pp.729-746
• /
• 2019

The nonlinear behavior of single- and multi-story steel plate shear walls (SPSWs) strengthened with three different patterns of fiber reinforced polymer (FRP) laminates (including single-strip, multi-strip and fully FRP-strengthened models) is studied using the finite element analysis. In the research, the effects of orientation, width, thickness and type (glass or carbon) of FRP sheets as well as the system aspect ratio and height are investigated. Results show that, despite an increase in the system strength using FRP sheets, ductility of reinforced SPSWs is decreased due to the delay in the initiation of yielding in the infill wall, while their initial stiffness does not change significantly. The content/type/reinforcement pattern of FRPs does affect the nonlinear behavior characteristics and also the mode and pattern of failure. In the case of multi-strip and fully FRP-strengthened models, the use of FPR sheets almost along the direction of the infill wall tension fields can maximize the effectiveness of reinforcement. In the case of single-strip pattern, the effectiveness of reinforcement is decreased for larger aspect ratios. Moreover, a relatively simplified and approximate theoretical procedure for estimating the strength of SPSWs reinforced with different patterns of FRP laminates is presented and compared with the analytical results.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.608-610
• /
• 2004

In continuous annealing line (CAL), POSCO, the center position control (CPC) is an essential technique that renders the steel-strip to pass at the center of a roll in order to prevent the strip from skewing or breaking. The CPC algorithm currently installed on the steering roll in the heating section of CAL is to control the strip position by using the reverse phase of error from the center position, without considering the dynamics of strip horizontal movement. Such algorithm may, unfortunately, require a manual operation occasionally when the range of strip input becomes wide, causing the dynamics 0 be dominant. Other PID-type control is rarely used in automatic operation because the excess of response may occur when the discontinuous points such as welding joints pass through rolls. In this paper, we identify the CPC system by using off-line data and design a compensator for the excessive dynamics by using the adaptive inverse control. Simulation result depicts the improved reliability of the proposed CPC system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.2
• /
• pp.327-333
• /
• 2003

Most of shape defects in steel strip are originated from the structure of rolling mill itself. For instance, strip crown occurs when the work roll is deformed by the bending moment induced on roll chocks. To get rids of the shape defects, it is necessary to increase the stiffness of rolling mill. The structure change of back-up roll is one of alternative ways to increase the mill stiffness without facility revamping from 4 high mill to 6 high mill. In this research work, the new back-up roll was developed and can be used in any type of 4 high mill to reduce the strip shape defects. The developed back-up roll consists of sleeve, arbor and phase angle adjusting system for arbor. The circumference of arbor is specially machined to adapt the strip width change during rolling. The experimental cold rolling test was done to prove the effectiveness of newly developed back-up roll. The experimental rolling results show that the new back-up roll has more powerful performance in reducing the shape defects than conventional back-up roll. It was also found that the new back-up roll has higher stability for shape control. In addition to, the only sleeve surface needs to be reground and changed in most cases, so that the maintenance cost can be greatly reduced.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.132-135
• /
• 2005

The purpose of this study was to propose the modified strip crown technique for esthetic restoration of primary anterior teeth using glass fibers. Celluloid crown form(3M, USA), Z100(P shade, 3M, USA). Aeliteflo(Bisco Inc., USA), and Clearfil SE Bond(Kuraray Medical Inc., Japan) were used for this technique. Mesh type of glass fiber(TESCERA Fiber Mesh, Bisco Inc, USA) was used for reinforcing material. After trimming the celluloid crown form, resin adhesive and flowable resin were applied on the pre-shaped glass fiber mesh. That mesh was placed on the lingual surface of inside of celluloid crown form and followed by light activation. Composite resin was filled into the celluloid crown form and put it on a prepared tooth and then light activated and finished the margin. The new modified strip crown technique can provide esthetics and increased durability for restoration of primary anterior teeth.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.307-314
• /
• 1998

We have studied the effects of interface on polarization dependence of waveguide and designed the polarization independent 2-dimensional waveguides on InP for arrayed waveguide grating. To figure out the effects of interface on polarization dependence, we have solved the 1-dimensional wave equation using a transfer matrix method. It is shown that the birefringence becomes stronger as the number of interfaces increases. In order to design polarization independent 2-dimensional waveguides, we have used effective index method. The structures considered are ridge type, raised strip type, and buried type waveguide. In the cases of ridge and raised strip type, conventional effective index method was used. In the case of buried type corrected effective index method was used. We have determined the height and width of waveguides such that the waveguides become polarization independent.

• 보존과학연구
• /
• s.25
• /
• pp.155-170
• /
• 2004

Jonam mountain is located in Gung nam Hamangun gayaeup, and it is 139.4m above sea. Most of Haman area consists of hill and mountains and Pinus densiflora Sieb. et Zucc,Quercus acutissima Carruth, Quercus variabilis Bl, Quercus mongolica Fisch and Robiniapseudoacacia L are distributed. Sungsan mountain fortress wall is designated as a national historical spot 67th and our laboratory excavated and surveyed Sungsan mountain fortress wall from 1991 to 1994.Especially, we confirmed mud layer in 1992 and excavated wooden remains such as wooden strip with inscription and so on. Also, wooden strip with inscription and the wooden remains of the type which is various such as brush, knife, various club, vessel, awl were excavated in 2002.After classifying remains on the spot, they were washed. We found three pieces of wooden strip during washing, and three pieces of wooden strip during conservation processing. Also, we confirmed others. Until now, we have processed 8000 wooden remains, and we are processing about 1500wooden remains.