• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.114-117
• /
• 2000

In order to keep the zero defect of production in press working process. The optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and it's phenomena, die structure, machine tool working for die making, die materials and it's heat treatment, metal working in field, their know how tc. are included in those factors. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. Part 2 of this study reveals with precision progressive die design, its making and tryout.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1997-2000
• /
• 1996

A strip-type bending actuator using perfluoro sulfonic acid film ($Nafion^{(R)}$ 117, Du Pont), which is a kind of conducting polymer, fabricated and characterized. Conducting polymer is a useful material as an actuator due to the simple structure, fabrication method and low driving voltage. Experimental results show that the fabricated bending actuator has about ${\pm}10^{\circ}$ of bending angle at 4 V and fast response, which means that the conducting polymer can be used practically as actuator material.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1801-1802
• /
• 2008

마리오네트는 끝단에 연결된 줄을 이용하여 사용자가 제어 할 수 있는 인형이다. 본 연구는 마리오네트 원리를 적용하여 인간의 동작을 통해 로봇을 직접 제어할 수 있는 방법을 제안한다. 이를 위해 인간 손과 로봇 손의 사이에 가상의 줄(Virtual Elastic strip)이 연결되어 있는 모델을 사용한다. 실시간으로 측정되는 인간의 동작에 따라 가상 줄의 길이가 변하게 되고 가상 힘이 발생된다. 이 가상 힘을 고려하여 로봇 팔의 정동역학(Forward dynamics) 해를 구한 후, 제어를 위한 로봇의 각 관절값을 얻게 된다. 제안한 방법을 이용하여 인간 동작을 실시간으로 가상 로봇의 동작으로 변환하고 제어하는 실험을 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1421-1422
• /
• 2015

본 연구는 스트립 힘센서에 기반한 무구속 호흡측정에서 스트립센서 최적 위치를 고찰하는 것을 주목적으로 한다. 이를 위해 압전센서를 사용하여 스트립 힘센서를 제작하였으며, 머리, 흉부, 복부 아래에 위치시켜 호흡성분을 검출하였다. 호흡성분 측정 정확성은 온도센서를 사용하여 코에서 동시에 측정된 기준 호흡과, 각 위치에서 측정된 결과의 비교를 통해 분석하였다. 결과적으로, 12명의 피험자를 대상으로 실험을 수행한 결과, 스트립센서를 사용하여 측정된 호흡간격은 기준센서 대비 $1.3669{\pm}0.5639$ 초 (머리), $0.9844{\pm}0.6336$ 초 (흉부), $0.7133{\pm}0.5185$ 초 (복부)의 평균절대오차를 보였다. 이는 복부에서 검출된 호흡성분이 기준호흡과 가장 유사함을 보여준다.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.107-112
• /
• 2010

A gas turbine consists of an upstream compressor and a downstream turbine with a combustion chamber, and also the compressor and the turbine are generally coupled using a single shaft. Large scale gas turbine compressor is designed as multi-stage axial flow and the blade is fan-type which is thick and wide. Recently radial cracking happens occasionally at the compressor blade tip of large scale gas turbine. So, FEM was performed on the compressor blade and vibration modes and dynamic stresses were analyzed. According to the analysis, 9th natural frequency mode of the blade, which is 2 strip mode, is near the vane passing frequency by the vane located at the upstream of the blade.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.83-86
• /
• 2004

The aeroelastic stability analysis of composite bearingless rotors is investigated using a large deflection beam theory in hover. The bearingless rotor configuration consists of a single flexbeam with a wrap-around type torque tube and the pitch links located at the leading edge and trailing edge of the torque tube root. For the analysis of composite bearingless rotors, flexbeam is assumed to be a rectangular section made of laminate. Two-dimensional quasi-steady strip theory and Loewy's aerodynamic theory with the lift deficiency function are used for unsteady aerodynamic computation. The finite element equations of motion for beams are obtained using Hamilton's principle. Numerical results of selected bearingless rotor configurations are obtained for the lay-up of laminae in the flexbeam and pitch links location.

• Structural Engineering and Mechanics
• /
• v.61 no.1
• /
• pp.31-47
• /
• 2017

As a relatively new type of multi-layered rubber-based seismic isolators, fiber-reinforced elastomeric isolators (FREIs) are composed of several thin rubber layers reinforced with flexible fiber sheets. Limited analytical studies in literature have pointed out that "warping" (distortion) of reinforcing sheets has significant influence on buckling behavior of FREIs. However, none of these studies, to the best knowledge of authors, has investigated their warping behavior, thoroughly. This study aims to investigate, in detail, the warping behavior of strip-shaped FREIs by deriving advanced analytical solutions without utilizing the commonly used "pressure", incompressibility, inextensibility and the "linear axial displacement variation through the thickness" assumptions. Studies show that the warping behavior of FREIs mainly depends on the (i) aspect ratio (shape factor) of the interior elastomer layers, (ii) Poisson's ratio of the elastomer and (iii) extensibility of the fiber sheets. The basic assumptions of the "pressure" method as well as the commonly used incompressibility assumption are valid only for isolators with relatively large shape factors, strictly incompressible elastomeric material and nearly inextensible fiber reinforcement.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.4
• /
• pp.35-43
• /
• 1986

Recently, the SWATH concept hull form which is capable of high speed navigation with small oscillatory motions in waves, was developed from the catamaran type hull forms. This paper discribes a method to predict motion responses of a SWATH ship in regular waves using the strip theory. The 2-dimensional hydrodynamic problem was solved using the improved Green integral equation which is free from the irregular frequencies. The effects of viscous drag which is dominant in heave damping of the SWATH ship are taken into account. Further, the effects of the stationary stabilizing fins which is important in high speed performance of the SWATH ship are included in the equation of motions. It seems that the motion responses calculated by the present method show better agreement with experimental results than other existing numerical results.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.263-270
• /
• 2008

We studied partial discharge detection by sensing electromagnetic waves emitted from the partial discharge source in an HV Rotating Machine using a UWB sensor. In this study, we design a new type of compact low frequency UWB sensor based on micro-strip technology. We also perform many experiments of offline and dismantled testing compared with the existing HFCT on stator winding of the HV generator. We mention the detailed design of a new compact UWB sensor along with the time domain PRPD pattern and frequency domain results of partial discharge in the stator winding of a 6.6kV rotating machine by offline testing performed in a laboratory.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.58-59
• /
• 2011

Microstrip line on dielectric substrate depending on the type of its configuration can be applied to be antenna, communication filters, and resonators. When driving frequency is considered more than X-band, unnecessary signal leakage should be occurred because of flowing through the planar circuit at banding position. So leakage signal will affect other planar circuit, and then EMC problem has to be introduced. In this paper, the affection of banding planar circuit on dielectric substrate was investigated.