• 한국수자원학회논문집
• /
• 제40권2호
• /
• pp.183-190
• /
• 2007

본 연구에서는 식생여과대에 있어서 토양층의 역할에 주목하였으며, 토양 침투량이 증가될 수 있는 구조로 토양층을 변형하여 일반적인 식생여과대에서의 오염저감효과와 비교 분석하였다. 따라서 연구의 최종 목적은 토양층 변화를 통한 식생여과대의 수질개선효과를 일반적인 토양층으로 구성된 식생여과대와 비교, 검토함으로써 보다 효과적인 식생여과대를 조성하고자 하는 것이다. 실험분석 결과, 토양층 변화를 접목시킨 식생여과대는 일반 식생여과대에 비해 표면유출에서 높은 오염물질 저감효과가 있는 것으로 나타났다. 이는 표면유출수 일부가 정류벽을 통과한 후 재상승하여 표면으로 유출되었기 때문으로 판단된다. 그러나 계단형에서의 하부유출수의 경우, 입경이 큰 모래와 자갈을 통과하여 유출이 일어나기 때문에 직선형 식생여과대보다 오염저감효율은 다소 낮게 나타났다. 이를 오염물질 유출부하량의 개념으로 파악해 보면, 하부유출량이 전체 유출유량에 대한 기여도가 계단형(4%)에서 직선형(2%)보다 높기 때문에 계단형에서의 오염물질 저감부하량이 직선형에 비하여 매우 높게 나타났다. 따라서 정류벽과 표면층 변화를 통해 침투량을 증가시킨 식생여과대는 일반적인 식생여과대보다 저감효과가 크고 식생여과대 적용에 필요한 여러 조건(토양의 침투성, 여과대의 넓이 및 길이, 유속 등)을 만족하지 않더라도 충분한 저감효과를 발휘할 수 있을 것으로 기대된다.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.384-392
• /
• 2003

본 연구에서는 유전체 슬랩으로 덮힌 평행평판 도파관의 좁은 슬릿을 통한 유전체슬랩 위의 도체 스트립과의 전자기적인 결합을 고려하였다. 제안된 구조에서 관찰되는 두 가지의 대조적인 결합현상인 캐비티형 결합과 기생형 결합의 차이점을 도체 스트립의 길이 및 위치, 도체 스트립에 유기된 전류, 복사패턴, 대역폭, 결합슬릿 근처의 전자계분포 등을 비교하여 관찰하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.85-92
• /
• 2002

In this study, we analyzed and experimented micro-strip line inductors and capacitors for a SAW duplexer, an important devise for mobile communication. For SAW duplexers, micro-strip line lumped elements must have small impedance values, below several tens of nH or several tens of pF, and a small area pattern. In this study, we performed theoretical analysis of flat line type, meander line type, and spiral line type inductors and interdigital capacitors on a LiTaO$_3$ Piezo-crystal. We proposed a measurement method to evaluate small values of lumped elements accurately with network analyzer. In experiments, we confirmed validity of the theoretical analysis method through fabrication and characterization of micro-strip line lumped elements. The analysis method in this paper can be applied to SAW duplexers well as other microwave devices.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.205-210
• /
• 2008

파이프라인의 원거리 초음파검사를 위한 자왜 스트립형의 비틀림 모드 도파 변환기에 널리 사용되는 니켈 스트립과 철 코발트합금 스트립의 자기이력곡선을 측정하고 스트립의 자기적 특성이 변환기의 감도에 미치는 영향을 분석하였다. 최적화된 철 코발트합금 변환기의 감도는 니켈 변환기의 그것보다 약 30 배 정도로 우수하였다. 이는 두 자왜물질의 잔류자화 및 보자력의 차이에 주로 기인함이 밝혀졌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.544-548
• /
• 2007

In general, final width of hot strip should be accomplished in this stage because width reduction of strip hardly appears during typical finishing mill. However, it is difficult to control the width of strip in the roughing mill process as the horizontal rolling of strip is subsequently performed after the vertical rolling. It is therefore important to obtain the deformation rolling direction on strip width to minimize the width spread of strip during horizontal rolling after vertical rolling. Generally there is Sizing press type and Edger-roll type. The width reduction process in sizing press has small amount of width spread compared with the edger. However, productivity by the sizing press process is much lower than those of the edger. In this study, sizing press and Edger-roll process parameters in a sheet rolling mill were set at specified values and the effect of the change in these parameters on product quality and process performance were evaluated.

• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.21-26
• /
• 2002

Color correction methods of chromaticity coordinates using Color Matching Function (CMF) were studied to develop a device-independent portable-type urine analyzer. The reflection spectra were measured for the degrees of 10 test items of the urine reagent strip (urine strip) to develop a portable-type urine analyzer. A computer simulation was performed to quantitatively distinguish the color reactions of the urine system, by using the spectral power distribution of Light Emitting Diode(LED), the reflection of a urine strip, and spectral sensitivity of a photodiode. To develop a device-independent system, chromaticity coordinates were modified to reduce the color deviations in the urine strip, by using the temperature compensation of LED and the color transformation by CMF. The experimental values obtained by developed urine system exhibited the accuracy above 95% for all color samples.

• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.518-523
• /
• 2005

Strip off-center is one of the major problems in hot strip mill line. The key to good centering is having good equipment, modern control systems, excellent maintenance and an understanding of milling process. Therefore, this study aims to develop a system that is useful for quantitative analysis of strip off-center. In this study, the measuring method of strip off-center was thoroughly studied and the exclusive control board to line scan camera were designed. Also, the manipulated type housing for line scan camera was developed to adjust initial parameters for strip width and center line. In order to check the accuracy and usefulness of the developed system, FM stand in $\#2$ Hot Strip Factory in Pohang Steel Works was targeted.

• 열처리공학회지
• /
• 제22권4호
• /
• pp.228-233
• /
• 2009

In order to predict the temperature distribution of stainless steel strip in Bright Annealing (BA) furnace, we performed the analysis of heat transfer and fluid flow using STAR-CCM+. The analysis model included unsteady fluid flow, heat transfer with radiation and moving grid. Two kinds of radiative properties, emissivity and reflectivity, were applied to the stainless steel strip, one is constant and the other is variable with time. As we call, the BA furnaces of stainless steel strip have two different types, muffle and no-muffle. The using of muffle type has been faced with some problems such as rising in material price and shortening of life cycle, etc. So the development of no-muffle type BA furnace is very important in order to save energy cost, lower environmental load and increase the productivity. The designed (or expected) temperature of stainless steel strip coming out of BA furnace was about $1065^{\circ}C$ while the environment temperature maintains around $1100^{\circ}C$. The result of our calculation was very close (or similar) to design temperature, and the application of radiative properties variable with time produced more accurate result than applying constant ones.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.697-702
• /
• 1997

This study presents test results of RC beams strengthened by carbon fiber sheet (CFS) or carbon fiber reinforced plastics (CFRP) for increasing shear resistance. Fifteen specimens were tested, and the test was performed with different parameters including the type of strengthening materials (CFS, CFRP), shear-strengthening methods (wing type, jacket type, strip type), strip-spacing, strengthening direction of FRP. The results show that shear-damaged RC beams strengthened by either CFS or CFRP have more improved the shear capacity.