• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.174-182
• /
• 1999

This paper describes a research work of developing a computer-aided design of product with bending constraints and piercing for progressive working. an approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, availability of press. Strip layout drawing generated by piercing with punch profiles divide into automatically for external area is shown into graphic forms, including bending sequences for the product with piercing and bending constraints. Results obtained using the modules enable the designer and manufacturer of piercing and bending dies to be more efficient in this field.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1149-1157
• /
• 1995

The research for variation of coolant film thickness and separating force has been investigated following the examination for friction profile of work roll and roughness change of strip surface in rolling mill producting actual commercial products. The obtained results are as follows ; (1) Coolant film thickness in cold rolling has been increased relative to the circumferential velocity of work roll, and formation of coolant films has decreased with the smaller diameter of work roll. (2) Separating force is related to the formation of coolant film, and large separating force is needed to the formation of coolant film but it is constant after formation of appropriate film. (3) Wear and roughness alleviation of work roll is larger in bottom-roll than in top-roll on cold surface is larger in the direction of width than in roll direction, and changes of roughness and strip surface hardness rarely occurred after 3 passes.

• Transactions of Materials Processing
• /
• v.25 no.2
• /
• pp.130-135
• /
• 2016

Rolled products often have residual stresses or strip waves that are beyond the customer’s tolerance. To resolve this problem, skin-pass rolling is widely used during post-processing of such products. Because a short contact length compared to the strip width is a characteristic of skin-pass rolling, several numerical analyses have been previously conducted based on a two-dimensional approach. In the current study, a series of simulations was conducted using numerical analysis of three-dimensional elastic-plastic finite element method.

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.151-157
• /
• 2012

In this paper, we used E-J constitutive law and H-formulation to calculate magnetic field profile, current density, and magnetization of high temperature superconductor (HTS) placed in time varying applied magnetic field. Finite element method (FEM)-based software, Comsol Multiphysics 3.5a, was employed to simulate 2-dimensional model of a superconducting thin strip. The numerical results based on Kim's critical state model were compared with the case of strip in a perpendicular field in the Brandt's paper as well as experimental data observed by Scanning Hall Probe and SQUID.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.892-894
• /
• 1995

This paper deals with developmeant and application of coating thickness control system in hot dip galvanizing process. According to the line conditions, such as line speed, strip size and target coating weight, a predictive preset model sets the initial oprating conditions. Referring the zine coating informations from the gauge, mean coating value controller adjusts the chamber pressure and horizontal distance between strip and air knife, while coating deviation controller adjusts the lip gap profile of the air knife. All adaptive gains are interactively calculated by numeric models based on the theoretical analysis. The operating result with this system effectively reduces the coating deviation in transverse direction as well as in longitudinal direction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.34-43
• /
• 1994

In order to improve thickness profile of cold rolled steel strip, a computer simulation and actual cold rolling experiments on a 4-high tandem cold mill were carried out. In this study, tapered barrel end at top work roll and incurved barrel body at bottom work roll were examined for reducing edge drop and threading of stripe. Also, the most effective stand of tandem cold mill and magnitude of optimal taper crown at several stand were investigated under a typical rolling condition. From actual rolling experiments, it was verified that thickness deviation over strip width could be improved up to 1.06% by applying tapered and incurved work roll only at the second and up to 0.89% by applying them at both the second and the third stand.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.171-179
• /
• 1990

The recombinant gamma-interferon (LBD-001) which was produced by yeast as host system was investigated on the pharmacological activities. This gamma-interferon exhibited potent inhibitory effect on adjuvant induced arthritis, but no effect on carrageenin induced paw edema in rats. It did not show any sedative, anticonvulsive, analgesic and hypothermic activities in animals. It also had no influences on isolated tracheal muscle and ileum of guinea pig, isolated uterus and fundus strip of rats, and on blood pressure and respiration in situ experiments of rabbits.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.4
• /
• pp.723-730
• /
• 1998

With the introduction of edge drop control system in Tandem Cold Rolling Mill, it is necessary to develop te numerical expression for the set-up and edge drop automatic control of cold rolled sheet. As a first step we developed a simulation program which predicts profile and the amounts of edge drop at the delivery side of each stand by using roll deformation anlysis with the slit roll model. And by using the program the effect of various rolling conditions on edge drop was investigated. As a result the relations were obtained between the amounts of edge drop and rolling conditions. Based on above relations, the numerical expression was developed for the set-up and automatic control of edge drop by multi-regression of simulation results for the variation of edge drop amount with each rolling condition.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.136-141
• /
• 1990

The vasorelaxant effects of KR-30075 in guinea-pig pulmonary, bovine coronary and renal arterial strips contracted by either$K^+$depolarization, phenylephrine, or prostaglandin $F_{2a}$($PGF_{2a}$) were evaluated. KR-30075 was more potent than imazodan as a vasorelaxant against $PGF_{2a}$-induced contractions in bovine coronary and renal arteries, whereas against$K^+$induced contractions KR-30075 was less potent than imazodan in guieapig pulmonary arteries and more potent in bovine coronary arteries. KR-30075 was more potent against contractions induced by phenylephrine or $PGF_{2a}$ than the contractions induced by $K^+$ This profile of activity for KR-30075 was similar to that of imazodan and dissimilar from the calcium entry blocking agent nifedipine. There was no vascular selectivity of KR-30075 between bovine coronary and renal arterial strip preparations. In conclusion, this study shows that KR-30075 represents the vasorelaxant effects on guinea-pig pulmonary, bovine coronary and renal arteries without specific vascular selectivity. The vasorelaxant profile of KR-30075, with different sources of vascular smooth muscle, is unlike that of calcium entry blocking agent and more similar to the profile of the agent that inhibit cyclic nucleotide phosphodiesterase.