• 대한미생물학회지
• /
• 제21권1호
• /
• pp.1-16
• /
• 1986

Fifty-one strains of Pseudomonas aeruginosa were isolated from various clinical specimens. Among them, 26 (51%) strains were gentamicin-resistant (Gm') and 25 (49%) were susceptible to gentamicin (Gm'). The frequencies of resistant strains to piperacillin (Pi), cefotaxime, moxalactam, cefoperazone (Cz), and amikacin (Ak) ranged from 21.6 to 31.4%, and $MIC_{50}$ of these drugs were lower than the critical concentrations of susceptibility and resistance. Thirty (58.8%) strains were multiply resistant to 12 or more drugs. All Gm' strains were multiply resistant to 12 or more drugs and one was resistant to all 18 drugs tested, while only four Gm' strains were multiply resistant to 12 drugs and the multiplicity of resistance of the other Gm' strains were less than 10 drugs. Resistance to Gm appeared to have a significant correlation with the resistance to tobramycin (Tb), Ak, Pi, and Cz. All Gm' strains were resistant to Tb and about 38.4 to 46.1% of them were resistant to Ak, Pi, and Cz. The incorporation of $Ca^{++}$ and $Mg^{++}$ ions in Mueller-Hinton agar (MHA) did not influence the MICs of Gm, Tb, carbenicillin (Cb), Pi, and Cz as compared with the results obtained in MHA without these ions. Gm strains were studied on the combined effect of beta-lactam antibiotics and aminoglycosides by the methods of checkerboard and modified paper strip diffusion. Most Gm' strains showed significant synergistic effects by the FIC index between Ak and three beta-lactam antibiotics; Cb, Pi, and Cz, but these results did not in agreement the results obtained through the method of modified paper strip diffusion test. In order to know the nature of the drug resistance of P. aernginosa, the plasmid profile analysis was studied. Agarose gel electrophoresis of lysates processed by the method of Kado and Liu showed one or more plasmids in 22 (43.1%) strains. A group of 19 strains showed at least one band of plasmid and three strains two bands. The range of the molecular weight of plasmids was 3.8 to 243 Mdal. All strains carrying large plasmids larger than 200 Mdal were isolated from wound specimens. Three Gm' strains also harboured the plasm ids of 13 to 203 Mdal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.437-438
• /
• 2006

Generally, the vertical roll process is used to achieve extensive width reduction in hot strip mill. However, it is difficult to avoid the defects such as dog-bone and seam-defect. The sizing press has been developed in response to the defects mentioned above. Especially, this study is carried out to investigate the deformation of slab by two-step sizing press. The deformation behavior in the width sizing process is more favorable than that in conventional vertical rolling edger. The objective of this study is to determine the optimal anvil shape parameters in the sizing press with two-step die from the viewpoint of edge-seam length. In general, the edge-seam defect occurs parallel to the rolling direction at both edges in horizontal rolling process after sizing press. The optimal combination of the parameters is determined by FE-simulation and Artificial Neural Network (ANN). The slab deformation in sizing press with convex anvil is analyzed by FE-simulation. The most suitable profile of the anvil is also discussed fur the improvement of trimming loss because of the side seam defect by FE-simulation and ANN.

• 한국수정란이식학회지
• /
• 제25권4호
• /
• pp.281-286
• /
• 2010

This study was to evaluate the protein profile of seminal plasma using 2-DE in Hanwoo. Seminal plasma was harvested from five mature Hanwoo, and seminal plasma protein was extracted by M-PER Mammalian Protein Extraction Reagent. Proteins were refined by clean-up kit and quantified by Bradford method until total protein was $300\;{\mu}l$. Immobilized pH gradient (IPG) strip was used 18 cm and 3~11 NL. SDS-PAGE was used 12% acrylamide gel. Each gels were visualized by comassie brilliant blue and silver staining. These spots were analyzed by MALDI-TOF MS and searched on NCBInr. The result, 20 proteins of 36 protein spots were searched through peptide sequencing on the NCBInr. 8 proteins profiled by 2-DE were proved through previous bovine studies and the name of each protein was albumin, nucleobindin, clusterin, TIMP-2, spermadhesin Z13, spermadhesin-1 and BSP proteins (BSP 30 kDa and BSP A1/A2). 12 new proteins were ATP synthase, protein MAK16 homolog, Transmembrane protein 214, E3 ubiquitin-protein ligase BRE1A, dual serine/threonine and tyrosine protein kinase, tissue factor pathway inhibitor 2, alpha-actinin-4, RUN domain-containing protein 3B, catenin alpha-1, protein-glutamine gamma-glutamyltransferase 2, plakophilin-1 and inter-alpha-trypsin inhibitor heavy chain H1 has not been previously described in the bovine seminal plasma study. These proteins may be contribute to define the type of proteins affecting fertility of male and improve the fertilizing ability of semen in Hanwoo.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.171-175
• /
• 2001

Chemical mechanical polishing(CMP) process has been widely used to planarize dielectrics and metal, which can apply to employed in integrated circuits for sub-micron technology. Despite the increased use of CMP process, it is difficult to accomplish the global planarization of free-defects in inter level dielectrics and metal. Especially, defects like (micro-scratch) lead to severe circuit failure, and affects yield. Current conditioning method - bladder type, orbital pad motion - usually provides unsuitable pad profile during ex-situ conditioning near the end of pad life. Since much of the pad wear occurs by the mechanism of bladder tripe conditioning and its orbital motion without rotation, we need to implement new ex-situ conditioner which can prevent abnormal regional force on pad caused by bladder-type and also need to rotate the pad during conditioning. Another important study of ADPC is related to the orbital scratch of which source is assumed as diamond grit dropped from the strip during ex-situ conditioning. Scratch from diamond grit damaged wafer severely so usual1y scraped. Figure 1 shows the typical shape of scratch damaged from diamond. We suspected that intensive forces to the edge area of bladder type stripper accelerated the drop of Diamond grit during conditioning, so new designed Flat stripper was introduced.

• 한국버섯학회지
• /
• 제12권4호
• /
• pp.341-349
• /
• 2014

팽이버섯과 느타리버섯의 색깔이 다른 계통과 부위별로 갓과 대로 나누어 아미노산 및 유리아미노산 분석을 실시하여 성분 조성과 함량을 비교하였다. 그 결과 버섯 종류와 계통, 그리고 부위에 따라 서로 다른 아미노산 종류가 검출되었다. 팽이, 느타리 모두에서 tryptophane은 검출되지 않았으며, 느타리에서는 특이적으로 alanine이 검출되지 않았다. 또한 팽이에서는 glutamic acid 함량이 가장 높았으며 methionine과 phenylalanine은 극히 적게 검출되었다. 느타리버섯에서는 glutamic acid 함량이 가장 높았고 phenylalanine과 cysteine이 낮았으며 특이하게 흑색변이계통에서 leucine이 검출되지 않았다. 또한 부위별로는 팽이와 느타리 모두 아미노산 종류별 비율은 동일한 경향을 보였으며, 일반적으로 대보다는 갓에서 아미노산 함량이 더 높은 경향을 보였다. 유리아미노산 분석 결과에서는 버섯계통별로 검출되는 아미노산 함량이 서로 달랐으며, 버섯의 갓과 대에서도 검출되는 아미노산 조성이 일치하지 않는 것으로 나타났다.

• 한국항만경제학회지
• /
• 제31권3호
• /
• pp.141-153
• /
• 2015

부산항의 수출이 우리나라 항만의 수출에서 차지하는 비중은 계속해서 감소하고 있는데, 이와 같은 항만의 위상변화는 해당 항만의 주요 수출시장과 수출품목에서 그 원인을 찾아볼 수 있다. 본고는 중국에 대한 부산항의 주요 10개 수출품목의 경쟁력이 어떻게 변화할 것인가를 밝히기 위해 시장비교우위(Market Comparative Advantage: MCA)지수를 도출하여 변화하는 행태를 분석함과 동시에 MCA지수를 대 중국 수출비중과 중국의 수입비중으로 분해한다. 부산항의 수출경쟁력은 MCA지수가 하락한 HS8703 품목을 제외한 9개 품목에서 상승하나, 이 중 7개 품목에서 중국의 수입비중이 감소함을 보인다. 그런데 중국의 수입비중이 줄어든다는 것은 시장비교우위지수가 상승하여도 수출증가를 낙관할 수 없다는 것을 의미한다. 중국의 수입비중이 감소하는 7개 품목에서 5개 품목은 대중 수출비중이 상승하나 2개 품목에서는 대중 수출비중도 함께 하락하여 MCA의 상승에도 불구하고 수출전망이 어둡다는 것을 보인다. 결국 HS3920, HS8708, HS8703과 같은 3개 품목에서만 수출경쟁력 향상이 수출전망을 밝게 한다는 것을 밝힌다. HS8708 품목이 부산항의 대중 수출에서 1위를 차지하는 품목이라는 점은 부산항의 대중 수출에 긍정적인 요소가 될 수 있으나, 10개 품목 중 3개 품목에서만 수출전망이 밝다는 것은 부산항의 대중 수출에 대해 전반적인 검토가 있어야 한다는 것을 보인다.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.303-309
• /
• 2007

Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 ($200{\mu}m$). And the processing time was 15min (1/20 time to form $200{\mu}m$ coping). The confocal laser scanning microscope (PASCAL 5, Carl Zeiss, Bernried, Germany) was used to measure the thickness of the pure gold layer electroformed on the gold strips. Half of the gold strip was coated two times with electroformed gold, and the other half one time. The data from the cone focal laser system was processed to get the vertical profile of the strips and the difference of the vertical height between the double coated and single coated layer was regarded as the thickness of the gold coating. The layer thickness value to built 3D image of the cone-focal laser was set $0.5{\mu}m$. Next to the measurement of the thickness of the coating, the Vicker's hardness test was done. It was performed on the double coated surface, single coated surface and non-coated surface (back side) three times each. Results. The mean thickness value gained from gold electroforming technique was measured to be $22{\mu}m$ for sample 1, $23{\mu}m$ for sample 2, $21{\mu}m$ for sample 3. In the same condition of time, power and the amount of electrolyte, the data showed no difference between samples. According to the results of variance analysis, the differences among the variations in number of coating were statistically insignificant (p>0.05), meaning that the two times of gold electroforming coating did not change the hardness of gold-silver-palladium alloy. Conclusion. The test of thickness of gold coating proved the coherency of the gold electroforming procedure, in other words, when the power, the exposed surface area, processing time and the amount of electrolytes were set same, the same thickness of gold would be coated on. The hardness test showed that the electroformed gold coating did not change the hardness of the gold-silver-palladium alloy when it is coated not more than $45{\mu}m$.

• 한국의학물리학회지:의학물리
• /
• 제23권4호
• /
• pp.234-238
• /
• 2012

눈꺼풀에 발생한 종양의 치료를 위해서는 종종 고에너지 전자선이 이용되며, 이 경우 환자의 시력 보호를 위해 금속차폐체를 눈꺼풀과 안구 사이에 삽입하고 방사선 치료를 시행한다. 차폐체에 접한 눈꺼풀 안쪽의 방사선량 확인을 위해서는 매우 작은 측정도구가 필요하며, 굽은 경계면의 특성상 유연한 측정도구가 바람직한데, radiochromic 필름 도시메트리는 이 목적에 매우 적합하다. 작으면서도 휘어진 경계면을 따라서 선량을 측정하기 위해, 눈꺼풀 팬텀과 차폐체 사이에 3-mm 폭의 EBT2 필름 띠를 삽입하고, 6MeV의 전자선을 조사 후, 선량분포를 얻었다. 금속차폐체와 동일한 크기로 아크릴 재질의 차폐체를 제작하여, 금속인공영상물이 없는 CT 영상을 얻은 후, 이를 이용하여 몬테칼로 전산모사를 수행하였다. 전산모사에서는 실제 안구차폐체의 재질을 따라 텅스텐, 알루미늄 및 스테인레스 스틸 등의 물질 정보를 이용하였다. 이렇게 얻은 전산모사 결과는 필름 측정과 2.1% 내에서 일치하였다. 밀리미터 크기 정도로 작고 또한 휘어진 영역에서 radiochromic 필름 도시메트리는 취급도 용이할 뿐만 아니라 만족스런 정확도를 보여주고 있다.