• Structural Engineering and Mechanics
• /
• v.55 no.6
• /
• pp.1261-1278
• /
• 2015

Due to their low intrinsic damping, stay cables in cable-stayed bridges have often exhibited unanticipated and excessive vibrations which result in increasing maintenance frequency and disruption to normal operations of the entire bridges. Mitigation of undesired cable vibration can be achieved by attaching an external damping device near the anchorage. High Damping Rubber (HDR) dampers have many advantages such as compact size, better aesthetics, easy maintenance, temperature stability, and cost benefits; therefore, they have been widely used to increase cable damping. Although a single damper has been shown to reduce cable vibrations, it is not the most effective method due to geometric constraints. This paper proposes the use of two HDR dampers to improve effectiveness and robustness in suppressing cable vibration. Oscillation parameters of the cable-dampers system were investigated in detail by modeling the stay cable as a taut string and each HDR damper as complex-valued impedance and by using an analytical formulation of the complex eigenvalue problem. The problem of two HDR dampers arbitrarily located along a cable is solved and the solution is discussed. Asymptotic formulas to calculate the damping ratios of the cable with two HDR dampers installed near the anchorage(s) are proposed and compared with the exact solutions. Further, a design example is presented in order to justify the methodology. The results of this study show that when the two HDR dampers are installed close to each other on the same end of the cable, some interaction between the dampers leads to reduced damping ratio. When the dampers are on the opposite ends of the cable, they are effective in increasing damping ratio and can provide better vibration reduction to multiple modes.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.561-578
• /
• 2010

This study proposes a multi-level damage localization strategy to achieve an effective damage detection system for civil infrastructure systems based on wireless sensors. The proposed system is designed for use of distributed computation in a wireless sensor network (WSN). Modal identification is achieved using the frequency-domain decomposition (FDD) method and the peak-picking technique. The ASH (angle-between-string-and-horizon) and AS (axial strain) flexibility-based methods are employed for identifying and localizing damage. Fundamentally, the multi-level damage localization strategy does not activate all of the sensor nodes in the network at once. Instead, relatively few sensors are used to perform coarse-grained damage localization; if damage is detected, only those sensors in the potentially damaged regions are incrementally added to the network to perform finer-grained damage localization. In this way, many nodes are able to remain asleep for part or all of the multi-level interrogations, and thus the total energy cost is reduced considerably. In addition, a novel distributed computing strategy is also proposed to reduce the energy consumed in a sensor node, which distributes modal identification and damage detection tasks across a WSN and only allows small amount of useful intermediate results to be transmitted wirelessly. Computations are first performed on each leaf node independently, and the aggregated information is transmitted to one cluster head in each cluster. A second stage of computations are performed on each cluster head, and the identified operational deflection shapes and natural frequencies are transmitted to the base station of the WSN. The damage indicators are extracted at the base station. The proposed strategy yields a WSN-based SHM system which can effectively and automatically identify and localize damage, and is efficient in energy usage. The proposed strategy is validated using two illustrative numerical simulations and experimental validation is performed using a cantilevered beam.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.1-8
• /
• 2013

This paper proposes an effective parallel implementation of a physical modeling synthesis of guitar on the GPU environment. We used appropriate filter coefficients and adjusted the length of delay line for each open string to generate 44,100 six-polyphonic guitar sounds (E2, A2, D3, G4, B3, E4) by using physical modeling synthesis. In addition, we analyzed the physical modeling synthesis algorithm and observed that we can exploit parallelism inherent in the length of delay line. Thus, we assigned CUDA cores as many as the length of delay line and effectively implemented the physical modeling synthesis using GPU to achieve the highest performance. Experimental results indicated that synthetic guitar sounds using GPU were very similar to the original sounds when we compared their spectra. In addition, GPU achieved 68x and 3x better performance than high-performance TI DSP and CPU, respectively. Furthermore, this paper implemented and evaluated the performance of multi-GPU systems for the physical modeling algorithm.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.409-414
• /
• 2008

The fabrication of gelatin nanofibers by electro spinning has been examined using the TFE/DW co-solvent system. It has been found that no beads-on-string structure was formed for the solution containing ionic salts. The resulting fibers exhibited a uniform diameter ranging from 110 to 125 nm. As the concentration of ionic salts increases, the beads become smaller and more spindle like, due to the increase of viscosity and conductivity. The addition of ionic salts induces a higher charge density on the surface of ejected jet during spinning, leading that higher elongation forces are applied to the jet. The higher enhancement of viscosity and conductivity was observed in gelatin solutions by the use of divalent salt. However, the concentration of ionic salts scarcely affected the variation of fiber diameter. While very low crystallinity was observed from XRD pattern for the sample containing no ionic salt, which increased with increasing the concentration of ionic salts.

• Genomics & Informatics
• /
• v.19 no.1
• /
• pp.5.1-5.11
• /
• 2021

Head and neck squamous cell carcinoma (HNSCC) is the most frequent type of head and neck cancer that usually arises from the mucosal surfaces of several organs including nasal cavity, paranasal sinuses, oral cavity, tongue, pharynx, and larynx. The Wnt signaling pathway is a crucial mechanism for cellular maintenance and development. It regulates cell cycle progression, apoptosis, proliferation, migration, and differentiation. Dysregulation of this pathway correlates with oncogenesis in various tissues including breast, colon, pancreatic as well as head and neck cancers. The present study aims to assess the gene alterations in the Wnt family of genes so as to derive an association with HNSCC. Computational approaches have been utilized for the identification of gene alterations in the Wnt family of genes. Several databases such as cBioportal, STRING, and UALCAN were used for the purpose. The frequency of alteration was high in case of Wnt family member 11 (5%). Gene amplification, deep deletions, missense and truncating mutations were observed in HNSCC patients. There was a marked difference in the gene expression profile of WNT11 between grades as well as normal samples. The survival probability measured using the Kaplan-Meier curve also presented with a significant difference among male and female subjects experiencing a low/medium level expression. The female patients showed less survival probability when compared to the male subjects. This provides the prognostic significance of the WNT11 gene in HNSCC. Taken together, the present study provides clues on the possible association of WNT11 gene alterations with HNSCC, which has to be further validated using experimental approaches.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.1
• /
• pp.103-113
• /
• 2019

The purpose of this study was to develop an e-textile using LEDs that can enhance visual and functional effects, and to identify their applicability to sportswear. By applying the design elements of fashion design concretely with LEDs, an e-textile design module is developed and that module is applied to the product, so LED application design can be proposed for use in a practical product. E-textiles have been divided into five categories, and their usefulness were verified by applying e-textiles to men's and women's sportswear. The product beign considered has a built-in tilt sensor, which illuminates the LEDs according to the user's movements, and allows the LEDs to be turned on or off in accordance to the user's preference. E-tatoo is a type of LED application that enhances the appearance by placing LEDs on a small area, emphasizing origin points, just like an actual tattoo. Designed with LEDs arranged in a straight line and various curved forms, e-strips can provide a function that matches the characteristics of each section of clothing or fashion item. E-wappen uses about 7-10 LEDs to give motifs a strong sense of visibility, thus adding to their vibrancy. E-panels and e-clothes were able to produce creative and high-value textures. It is also expected to be used for special purposes or bags as it is possible to produce high value-added textures that are creative and aesthetically beautiful. For instance, a progressive LED string on the straight line of female leggings can further emphasize rhythmic movements during exercise, and e-wappen also serves the purpose of nighttime protection. It is also believed that the application of dance or dance-related sportswear will make the movement of the performance more intense and lively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.1
• /
• pp.105-115
• /
• 2019

Recently, intelligent Android malicious codes have become difficult to detect malicious behavior by static analysis alone. Malicious code with SO file, dynamic loading, and string obfuscation are difficult to extract information about original code even with various tools for static analysis. There are many dynamic analysis methods to solve this problem, but dynamic analysis requires rooting or emulator environment. However, in the case of dynamic analysis, malicious code performs the rooting and the emulator detection to bypass the analysis environment. To solve this problem, this paper investigates a variety of root detection schemes and builds an environment for bypassing the rooting detection in real devices. In addition, SDK code hooking module for Android malicious code analysis is designed using Xposed, and intent tracking for code flow, dynamic loading file information, and various API information extraction are implemented. This work will contribute to the analysis of obfuscated information and behavior of Android Malware.

• Journal of Gastric Cancer
• /
• v.19 no.2
• /
• pp.193-201
• /
• 2019

Purpose: There is no consensus on the optimal method for intracorporeal esophagojejunostomy (EJ) in laparoscopic total gastrectomy (LTG). This study aims to compare 2 established methods of EJ anastomosis in LTG. Materials and Methods: A total of 314 patients diagnosed with gastric cancer that underwent LTG in the period from January 2013 to October 2016 were enrolled in the study. In 254 patients, the circular stapler with purse-string "Lap-Jack" method was used, and in the other 60 patients the linear stapling method was used for EJ anastomosis. After propensity score matching, 58 were matched 1:1, and retrospective data for patient characteristics, surgical outcome, and post-operative complications was reviewed. Results: The 2 groups showed no significant difference in age, body mass index, or other clinicopathological characteristics. After propensity score matching analysis, the linear group had shorter operating time than the circular group ($200.3{\pm}62.0$ vs. $244.0{\pm}65.5$, $P{\leq}0.001$). Early postoperative complications in the circular and linear groups occurred in 12 (20.7%) and 15 (25.9%, P=0.660) patients, respectively. EJ leakage occurred in 3 (5.2%) patients from each group, with 1 patient from each group needing intervention of Clavien-Dindo grade III or more. Late complications were observed in 3 (5.1%) patients from the linear group only, including 1 EJ anastomosis stricture, but there was no statistical significance. Conclusions: Both circular and linear stapling techniques are feasible and safe in performing intracorporeal EJ anastomosis during LTG. The linear group had shorter operative time, but there was no difference in anastomosis complications.

• The Research Journal of the Costume Culture
• /
• v.29 no.4
• /
• pp.471-487
• /
• 2021

The purpose of this study was to analyze changes to body measurements and silhouettes after wearing an early 19th century women's corset. Two types of corsets were tested. Changes in body size and silhouette were compared based on the levels of tightening strength of the corset. The tightening strength was adjusted in 4 steps by making the length of back fastening string 10-40 cm shorter than the standard. The silhouette was compared with the front silhouette and the side silhouette. The results were as follows. After wearing the experimental 19th century corsets, the chest circumference and front interscye length increased. However, the chest circumference did not increase proportionally to the tightening strength. The underbust circumference, waist circumference, and back interscye length also decreased. The waist width was decreased to create a slim front silhouette. The change in the body silhouette differed depending on the style of the experimental corset. The experimental corset made with the six-piece torso pattern changed the posture so that the shoulders were pulled back and the chest was pushed forward. The experimental corset with the side bodice pattern resulted in the subject's shoulders reclining backward and the chest and abdomen extending forward. The results of this study show that women's body sizes and silhouettes could be changed by wearing the early 19th century corsets, but the changes in body size and silhouette vary depending on the wearer's individual body type or corset style.

• The Research Journal of the Costume Culture
• /
• v.29 no.3
• /
• pp.361-373
• /
• 2021

The purpose of this study is to contribute to the role of lines in creative design development by analyzing the expression types and aesthetic characteristics of modern fashion using geometric formativeness of symmography. A literature study was conducted of works since 2009 to examine the general consideration of lines together with analysis of the concept and characteristics of symmography in the formative arts field, and to analyze the expression types and aesthetic characteristics of modern fashion design using the formativeness of symmography. The infinite sense of formativeness and original expression of symmography are used in formative arts such as space design, installation art, and industrial design. Expression types of modern fashion design using geometric formativeness of symmography can be classified into the following three types: two-dimensional graphic pattern, relief surface, and three-dimensional spatial. First, the two-dimensional graphic pattern type forms an optical pattern, providing individuality and visual interest to the textile design. Second, the relief surface type expresses the plane in various ways, so that the thickness changes according to how lines overlap. Third, the three-dimensional spatial type expands the boundaries of clothing and creates a fantastic spatial beauty. Next, the aesthetic formativeness of fashion design using symmography can be classified into repetitive rhythmicity, geometric self-similarity, and optical spatiality. Symmography enables a myriad of geometric patterns to be developed depending on material, color, and the designer's imagination, and helps inspire a variety of designs in fashion that sculpt a three-dimensional human body.